• 한국안전학회지
• /
• 제18권2호
• /
• pp.22-27
• /
• 2003

The roller machines installed in the industrial field are operated under hazardous conditions due to no safety devices available, human error during operation, defective safety devices, and inadequate regulation even in case that safety devices are provided. Up to now, most roller machines installed in domestic field are provides with band breaking system as a safety device. In this study, the emergency stop distance is measured within the limit of domestic regulation but violates a foreign regulation(EN1417). Consequently, it is concluded that the roller machines with a band breaking system have high possibility of death or serious injury of the operator and the system should be improved with the introduction of additional safety devices. This thesis suggests the safety measures suitable for the roller machines with different drive systems based on the experiment results. The use of the newly developed safety system has been tested on many cases.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.

• 자동차안전학회지
• /
• 제10권2호
• /
• pp.20-28
• /
• 2018

Currently, sharp increase of car is on the rise as a serious social problem due to loss of lives from car accident and environmental pollution. There is a study on ITS (Intelligent Transportation System) to seek coping measures. As for the commercialization of ITS, we aim for occupancy of world market through ASV (Advanced Safety Vehicle) related system development and international standardization. However, the domestic environment is very insufficient. Core factor technologies of ITS are Adaptive Cruise Control, Lane Keeping Assist System, Forward Collision Warning System, AEB (Autonomous Emergency Braking) system etc. These technologies are applied to cars to support driving of a driver. AEB system is stop the car automatically based on the result decided by the relative speed and distance with obstacle detected through sensor attached on car rather than depending on the driver. The purpose of AEB system is to measure the distance and speed of car and to prevent accident. Thus, AEB will be a system useful for prevention of accident by decreasing car accident along with the development of automobile technology. This study suggests a scenario to suggest a test evaluation method that accords with domestic environment and active response of international standard regarding the test evaluation method of AEB. Also, by setting the goal with function for distance, it suggests theoretic model according to the result. And the study aims to verify the theoretic evaluation standard per proposed scenario using car which is installed with AEB device through field car driving test on test road. It will be useful to utilize the suggested scenario and theoretical model when conducting AEB test evaluation.

• 센서학회지
• /
• 제16권1호
• /
• pp.68-76
• /
• 2007

In general, the braking system of a high speed train has an important role for the safety of the train. To stop safely the train at its pre-decided position, it is necessary to properly combine the various brakes. The train has adopted a combined electrical and mechanical (friction) braking systems. In order to design a good brake system, it is essential for designers to predict the brake performance. In this paper, the braking performance analysis program has been developed and verified by comparing the simulation results with the brake test results of HSR-350x; both results match very well. Also, the brake performances of high speed trains can be predicted by using this program under various conditions.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.1-5
• /
• 2015

The Unmanned Air Vehicle (UAV) systems are indispensable tools of air surveillance and reconnaissance nowadays. Via this systems, hazardous end risky intelligence gathering activities are handled easily. Although they are named as "Unmanned" the UAV systems are commanded by pilots/operators. So, because of weather conditions, enemy attacks etc. as well as pilot error it is possible to face with sudden Round per Minute (RPM) drops and subsequently engine cut/stop during a mission flight at high altitudes. In this case, there are some very urgent decisions to make and rapid "emergency procedure" steps to take in a very short time before Line of Sight (LOS) is lost. The time before crash and the distance to landing air base need to be calculated, the Return Home route need to be checked and the landing/crash side need to be determined. Therefore it is a vital necessity that UAV pilots have some extra qualifications like being determined, well instructed and trained, experienced apart from operating ability. Within this scope, for an education process of a UAV pilot experience sharing and lessons learned are as important as simulators even more. By means of lessons learned it is possible to find out the reasons, mistakes and prevent the likely UAV accidents. In this study it is told about a real UAV crash, experienced of the pilot, the dos and don'ts and the difficulties. Thus it is aimed to help the people who can experience the same or similar situations in future.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.809-810
• /
• 2016

본 논문에서는 주행 중 운전자가 브레이크 페달을 조작할 경우, 차량 후미의 브레이크등과 연계되어 점등됨과 동시에 차량의 감속 정도에 따라 점등되는 영역이 단계적으로 점멸되며 표시되는 속도 감응형 차량용 브레이크등 시스템을 구현하여 실험적으로 확인하였다. 뒤따르는 후방 차량이 선행차량의 감속상태를 더욱 쉽고 빠르게 인지시킴으로써 선행 차량의 급정거에 따른 추돌 사고를 예방할 수 있으며, 후방 차량의 신속한 대응을 이끌어낼 수 있다. 또한 초음파 센서를 이용하여 차간 거리가 일정 거리 이상으로 가까워지는 경우, 부져와 함께 비상등이 켜지며 후방 차량의 운전자에게 상황을 전달한다.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.11-22
• /
• 2018

철도터널의 방재시설 계획 시 터널의 안전성을 정량적 위험도 평가에 의해서 정량화하여 방재시설의 적정성 여부를 판단하도록 하고 있다. 이에 본 연구에서는 터널화재에 대한 정량적 위험도 평가 시 결과에 크게 영향을 미치는 화재열차의 터널 내 정차확률을 예측하는 방법을 제시하였다. 이를 위해서 열차의 주행저항계수를 고려하여 타력운전거리를 계산하기 위한 모델을 개발하였으며, 타력운전특성과 비상제동거리를 고려하여 몬테카를로 시뮬레이션 기법에 의해 터널연장 및 경사도, 초기주행속도를 변수로 하여 화재열차가 터널에 정차할 확률을 예측하였다. 타력운전거리의 예측을 위한 운동방정식은 KTX II의 주행저항계수를 반영하여 분석하였다. KTX II 열차의 경우, 타력운전거리는 상향경사의 터널에서는 경사도가 증가할수록 감소하나 하향경사구간에서는 정지하지 않고 계속하여 주행이 가능하다. 화재열차의 터널 내 정차확률은 열차의 주행속도가 증가할수록, 경사도가 낮을수록 감소하며, 고속열차(주행속도 250 km/h 이상)는 인적오류를 고려하지 않는 경우, 경사도 0.5% 이하의 터널에서는 화재 시 열차가 터널에 정차할 확률은 0%이고, 경사도가 증가하고 터널연장이 증가하면 정차확률은 급격하게 증가하는 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.102-109
• /
• 2019

본 논문은 K56 탄약운반장갑차에 장착되는 서보제어기의 통신오류를 제거하기 위한 회로카드조립체의 설계에 대한 연구이다. K56 탄약운반장갑차는 K-55A1 자주포에 탄약 보급 및 적재를 자동화한 무기체계로써, 탄약운반장갑차의 서보제어기는 탄약이동 제어를 담당하는 핵심적인 기능품이다. 따라서, 서보제어기는 K-55A1 자주포의 운용성을 위해 높은 통신 안정성 및 신뢰성이 요구된다. 그러나, 기존의 서보제어기는 간헐적인 통신오류가 발생하는 문제점이 확인되었으며, 이로 인한 긴급정지 현상이 발생한 바 있다. 본 논문은 이러한 문제를 해결하기 위해 서보제어기의 통신신호 분석 및 서보제어기의 회로카드조립체에 대한 고장원인을 식별하였다. 또한 고장원인 분석을 통해 회로카드조립체의 Data/Address 라인에 의한 신호간섭이 발생하는 현상을 확인하였으며, 각 통신회선 간의 이격거리 조정, 위치변경 등의 신호간섭을 회피하는 재설계를 수행하여 통신오류 현상을 해소하였다. 마지막으로 제안된 원인 분석 및 설계의 유효성을 서보제어기 단품시험과 체계장비 부착시험을 통해 입증하였다. 따라서, 서보제어기의 신뢰성 확보를 통한 방위력 향상과 더불어, 통신의 신뢰성이 필요한 유사품목의 설계에도 참고자료가 될 것으로 기대된다.