• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.1
• /
• pp.23-28
• /
• 2012

The performance improvement of the secondary storage is very slow compared to the main memory and processor. The data is loaded from secondary storage to memory for the execution of an application. At this time, there is a bottleneck. In this paper, we propose an Executable Compression Method to speed up the initial loading time of application. and we examined the performance. So we implemented the two applications. The one is a compressor for Execution Binary File. and The other is a decoder of Executable Compressed application file on the Embedded System. Using the test binary files, we performed the speed test in the six files. At the result, one result showed that the performance was decreased. but others had a increased performance. the average increasing rate was almost 29% at the initial loading time. The level of compression had different characteristics of the file. And the performance level was dependent on the file compressed size and uncompress time. so the optimized compression algorithm will be needed to apply the execution binary file.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1123-1131
• /
• 2020

The quick-response (QR) code is a two-dimensional barcode which is widely being used. Due to several interesting features such as small code size, high error correction capabilities, easy code generation and reading process, the QR codes are used in many applications. Nowadays, a printed color QR code for offline applications is being studied to improve the information storage capacity. By multiplexing color information into the conventional black-white QR code, the storage capacity is increased, however, it is hard to extract the embedded information due to the color crosstalk and geometrical distortion. In this paper, to overcome these problems, a new type of QR code is designed based on the CMYK color model and the local spatial searching as well as the global spatial matching is introduced in the reading process. These results in the recognition rate increase. Through practical experiments, it is shown that the proposed algorithm can perform the bit recognition rate improvement of about 3% to 5%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.181-186
• /
• 2015

With the rapid growth of semiconductor technologies, small-sized devices with powerful computing abilities are becoming a reality. As this environment has a limit on power supply, NVM storage that has a high density and low power consumption is preferred to HDD or SSD. However, legacy software layers optimized for HDDs should be revisited. Specifically, as storage performance approaches DRAM performance, existing I/O mechanisms and software configurations should be reassessed. This paper explores the challenges and implications of using NVM storage with a broad range of experiments. We measure the performance of a system with NVM storage emulated by DRAM with proper timing parameters and compare it with that of HDD storage environments under various configurations. Our experimental results show that even with storage as fast as DRAM, the performance gain is not large for read operations as current I/O mechanisms do a good job hiding the slow performance of HDD. To assess the potential benefit of fast storage media, we change various I/O configurations and perform experiments to quantify the effects of existing I/O mechanisms such as buffer caching, read-ahead, synchronous I/O, direct I/O, block I/O, and byte-addressable I/O on systems with NVM storage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.1
• /
• pp.77-82
• /
• 2014

SD memory cards are widely used in portable digital devices, and most of them exploit NAND flash memory as their storage, so that they have a feature of storing users' important data safely with low costs. In case of using NAND flash memory as storage, however, there is no method to store users' data if memory capacity is insufficient when transferring a large volume of data. This paper proposes a virtual SD memory card system. It used a SD memory card device driver to process data requested from a host by exploiting external storage rather than by exploiting flash memory as a memory core for storing data to the SD memory card. For experiment, it used the FPGA-based SD card slave controller IP on the SMC controller with a S3C2450 ARM CPU to test.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.733-740
• /
• 2008

Recently, mobile computing devices are used popularly. And quantity of information on mobile computing devices is being increased due to digitalization of information. So it needs an embedded DBMS for effective information management. Furthermore, since flash memory having a restriction on the number of partial write cycles is rapidly deployed on mobile computing devices as data storage and is more expensive than the conventional magnetic hard disk, the compressed data management system(CDMS) has been considered as an effective storage management technique for mobile computing devices in previous research. However, the research of CDMS is at the initial stage and has several problems. Hence, in this paper, we present additional storage management methods to solve the problems and improve the effectiveness of the CDMS for embedded DBMS.

• KIISE Transactions on Computing Practices
• /
• v.21 no.10
• /
• pp.639-644
• /
• 2015

The capacity of flash-based storage such as Solid State Drive(SSD) and embedded Multi Media Card(eMMC) is ever-increasing because of the needs from the end-users. However, if a flash-based storage crashes, such as during power failure, the flash translation layer(FTL) is responsible for the crash recovery based on the entire flash memory. The recovery time increases as the capacity of the flash-based storages increases. We propose O1FTL with O(1) crash recovery time that is independent of the flash capacity. O1FTL adopts the working area technique suggested for the flash file system and evaluates the design on a real hardware platform. The results show that O1FTL achieves a crash recovery time that is independent of the capacity and the overhead, in terms of I/O performance, and achieves a low P/E cycle.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.222-228
• /
• 2012

This paper presents a design and simulation of bi-directional DC/DC boost converter for a fuel cell system. In this paper, we analyze the equivalent model of both a boost converter and a buck converter. Also we propose the controller of bi-directional DC-DC converter, which has buck mode of charging a capacitor and boost mode of discharging a capacitor. In order to design a controller, we draw bode plots of the control-to-output transfer function using specific parameters and incorporate 3pole-2zero compensator in a closed loop. As a result, it has increased PM(Phase Margin) for better dynamic performance. The proposed bi-directional DC-DC converter's 3pole-2zero compensation method has been verified with computer simulation and simulation results obtained demonstrates the validity of the proposed control scheme.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.3
• /
• pp.151-160
• /
• 2018

NAND flash memories have the advantages of fast access speed, high density and low power consumption, thus they have increasing demand in embedded system and mobile environment. Despite the low power and fast speed gains of NAND flash memory, DRAM disk buffers were used because of the performance load and limited durability of NAND flash cell. However, DRAM disk buffers are not suitable for limited energy environments due to their high static energy consumption. In this paper, we propose WAP-LRU (Write pattern Analysis based Placement by LRU) hybrid disk buffer management policy. Our policy designates the buffer location in the hybrid memory by analyzing write pattern of the workloads to check the continuity of the page operations. In our simulation, WAP-LRU increased the lifetime of NAND flash memory by reducing the number of garbage collections by 63.1% on average. In addition, energy consumption is reduced by an average of 53.4% compared to DRAM disk buffers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2C
• /
• pp.167-172
• /
• 2008

Since a 2-dimensional (2D) bar code can retrieve data and information quickly, it is widely used and recognized as a useful tool for many industrial applications. However, the information capacity of the 2D bar code is still limited. Recently the analog-digital code (AD code), which has the largest storage capacity yet contained in a code, has been developed, thereby expanding the bar code's application range because it overcomes the limitation of data capacity. In this paper, we present the AD code and implement an effective embedded system which can transform text information into voice using the 2D AD code and Text To Speech (TTS). This voice information can also be transmitted to blind people as well as the old by capturing the AD code on paper or in books.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.190-200
• /
• 2011

Android platform provides a content provider and a cursor mechanism to access the internal SQLite engine. Content providers not only store and retrieve data but also make it accessible to applications. Applications can only share data through content provider, since there's no common storage area that Android packages can access. Cursor is an interface that provides random read-write access to the result set returned by a database query. However, this cursor possesses two major limitations. First, a cursor does not support a join clause among cursors, since the cursor can only access a single table in the content provider. Second, the cursor is not capable of creating user-customized field in the predefined content providers. In this paper, we propose the unified cursor architecture that merges several cursors into a single virtual cursor. Cursor translation look-aside buffer (TLB), column windowing mechanism and virtual data management are the three major techniques we have adopted to implement our structure. And we also propose a delayed synchronization method between an application and a proposed unified cursor. An application can create a user-customized field and sort multiple tables using a unified cursor on Android platform.