• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.1
• /
• pp.37-43
• /
• 2010

In this paper, we implement that hollow type joint using two more than general motor and design for compact structure embedded electronic parts in the development of 7 degree of freedom manipulator. We propose a method to overcome risk and the limit of operating radius which are point out as a limit of previous industrial robot. and also propose to more efficient and stable manipulator implement method.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.709-715
• /
• 2010

This paper represents a map building and localization system for mobile robot. Map building and navigation is a complex problem because map integrity cannot be sustained by odometry alone due to errors introduced by wheel slippage, distortion and simple linealized odometry equation. For accurate localization, we propose sensor fusion system using encoder sensor and indoor GPS module as relative sensor and absolute sensor, respectively. To build a map, we developed a sensor based navigation algorithm and grid based map building algorithm based on Embedded Linux O.S. A wall following decision engine like an expert system was proposed for map building navigation. We proved this system's validity through field test.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.60-60
• /
• 2000

CAN(Controller Area Network) is a serial communication protocol which specifies very low cost and high performance. It is widely used in rea1-time control applications such as automobiles, aircraft, and automated factories. The main application fields are industrial control systems and embedded network. In this paper, the CAN monitoring system is proposed and implemented. Also its performance is tested in the mobile robot which is integrated by CAN and its performance lot receipt failure rate is evaluated. This can be used to analyze the performance of the network. It can tie also used to manage and monitor the network.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.59-62
• /
• 2012

본 논문에서는 이산 코사인 변환한 결과를 기반으로 필터링을 통해 디모자이킹 하는 알고리듬을 제안한다. 이산 코사인 변환한 결과로 에너지가 에지방향의 정보를 나타내는 분포 특성을 활용하여 가중치를 부여할 수 있는 효율적인 방법을 제안하고 이를 통해 필터링 하는 방법을 제안한다. 실험결과에서는 기존의 양선형 보간법에 비해 PSNR 측면에서의 뛰어난 성능을 보여준다.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.430-434
• /
• 1987

This paper describes implementation of a robot programming system for automation of manufacturing products, which is embedded in the C programming language. World representation and motion primitives necessary to describe a manipulator task are provided by a set of procedure calls and user defined data structures. Off-line programming is implemented with graphic simulation as a debugging tool. PUMA 560 manipulators are used as a model for one task which inserts a nonstandard power IC Iota PCB. Communication facilities are provided for collision avoidance or two manipulators.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.231-234
• /
• 2002

본 논문에서는 홈 네트워크를 기반으로 한 지능형 홈 로봇의 구현에 대한 내용을 논의하였다. 기존의 로봇들은 대부분 독립적으로 동작하는 형태의 로봇이 주류를 이루었다. 현재 급속히 확산되고 있는 홈 네트워크는 가정 내 장치들이 정보를 주고받을 수 있는 통로의 역할을 할 수 있다. 이러한 로봇을 홈 네트워크 환경과 결합함으로 더욱 지능적이며, 다양한 기능을 구현 할 수 있다 홈 네트워크 환경에서는 로봇이 모든 일을 처리하던 방식에서 탈피하여, 네트워크를 이용한 작업의 분산이라는 이점을 얻을 수 있다. 뿐만 아니라, 계속적으로 추가되는 가정의 장치들이 네트워크에 연결됨으로 로봇은 이들 장치에 더욱 쉽게 접근할 수 있다. 향후에는 다양한 방식의 흠 네트워크를 기반으로 로봇이 행동하는 지능형 공간 (Smart Space)의 형태로 발전할 것으로 예상된다. 본 연구에서는 흠 서버, embedded robot,지능형 로봇으로 구성된 흠 네트워크 기반의 시스템을 제안하고 구현하였다.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.537-540
• /
• 2018

본 논문은 Jetson_TX2(임베디드 보드)의 ROS(Robot Operating System)기반으로 맵 지도를 작성하고, SLAM 및 DQN(Deep Q-Network)을 이용한 목적지까지의 이동명령(목표 선속도, 목표 각속도)을 자이로센서로 측정한 현재 각속도를 이용하여 Cortex-M3의 기반의 MCU(Micro Controllor Unit)에 하달하여 엔코더(encoder) 모터에서 측정한 현재 선속도와 자이로센서에서 측정한 각속도 값을 이용하여 PID제어를 통한 실내 자율주행 서비스 로봇.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.70-74
• /
• 2006

In this paper, We propose the real-time monitor and control mechanism based-on web service for intelligent robot called URC(Ubiquitous Robotic Companion). URC is intelligent robot designed to interact with external digital device that can communicate through wire or wireless. In this paper, we designed the result of this study into the target robot called NETTORO and proved its practical worth. we optimized web-service technology in Embedded system environment so that can monitor and control indoors in remote place through acquired information from various sensors / actuators and then we designed. Also, we described command port to WSDL, so that can apply variously such as web server or application program in AXIS engine through gSOAP transmission protocol.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.643-648
• /
• 2005

Generally, ships have marks of various shapes on outside of the hull. Among them, so called "Draft Mark" indicates the distance from the bottom of the keel to the waterline. Draft marks are used to determine the displacement and other properties of the ship for stability and control purposes. These marks are made up of welding bead or sticking the steel plate on outside of the hull. To improve the confidence level of the ship owner, quality and accuracy of the draft mark is very important. So the automatic mark welding robot is used to enable a high quality and accurate manufacturing line. To improve the system portability, the system is divided into two distinct parts, namely mechanical part and control part. Mechanical part is robust, a lightweight, and easy to dismantle. The control part consists of an in-house developed controller, which is based on embedded Linux. Also, the control part consists of power line communication module to ensure the applicability of the controller in manufacturing line. In this paper, the methodologies of control and configuration of the robot are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2346-2349
• /
• 2005

Distributed Autonomous Robotic System (DARS) is defined as a system that independent autonomous robots in the restricted environments infer their status from pre-assigned conditions and operate their jobs through the cooperation with each other. In the DARS, a robot contains sensor part to percept the situation around themselves, communication part to exchange information, and actuator part to do a work. Especially, in order to cooperate with other robots, communicating with other robots is one of the essential elements. Because Bluetooth has many advantages such as low power consumption, small size module package, and various standard protocols, Bluetooth is rated as one of the efficient communicating technologies which can apply to small-sized robot system. In this paper, we will develop Bluetooth communicating system for autonomous robots such as DARS robots. For this purpose, The Bluetooth communication system must have several features. The first, this system should be separated from other robot parts and operate spontaneously and independently. In other words, this communication system should have the ability to organize and maintain and reorganize a network scheme. The next, this system had better support any kinds of standard interfaces in order to guarantee flexible applicability to other embedded system. We will discuss how to construct and what kind of procedure to develop the network system.