• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.3
• /
• pp.231-242
• /
• 2004

Remote control and monitoring of information appliances require RTOS and TCP/IP network module to communicate each other. Traditional TCP/IP protocol stacks, however, require relatively large resources to be useful in small 8 or 16-bit systems both in terms of code size and memory usage. It motivates design and implementation of micro TCP/IP that is lightweight for embedded systems. Micro embedded web server is also required to control and monitor information appliances through the Web. In this paper, we design and implement micro TCP/IP and Web server for information appliances. For this goal, we investigate requirements for the interoperability of embedded systems with the Internet and the Web-based control of embedded systems. Next, we compare our micro TCP/IP protocol stack with that of RTIP and QPlus in terms of object code size and performance. The size of micro TCP/IP protocol stack can be reduced by 3/2 and 1/4, respectively, comparing with that of RTIP and QPlus. We also show that the performance of our micro TCP/IP is similar to that of RTIP and QPlus since it handles 2.9Mbps when delayed ACK is not adapted.

• Journal of Internet Computing and Services
• /
• v.6 no.5
• /
• pp.133-141
• /
• 2005

In this paper, we designed about OFDM/QPSK image transmission system simulator embedded watermark in wireless channel environment. Channel environment used OFDM/QPSK still image transmission system considering AWGN, Multi-path fading. And, we analyzed effect of still image and watermark information in considered channel environment. Watermark information is coded by DM-SS (Direct Matric/Spread Spectrum) image watermarking scheme, Also, we used interleaving scheme for mitigating the degradation in watermarking data under wireless channel. As a results, we could know that PSNR of watermark image improved of about 1dB by 54.2371dB then apply interleaving in same multi-path fading environment.

• Architectural research
• /
• v.7 no.1
• /
• pp.27-38
• /
• 2005

No specific guidelines are available for computing the bearing strength of connection between steel coupling beam and reinforced concrete shear wall in a hybrid wall system. There were carried out analytical and experimental studies on connection between steel coupling beam and concrete shear wall in a hybrid wall system. The bearing stress at failure in the concrete below the embedded steel coupling beam section is related to the concrete compressive strength and the ratio of the width of the embedded steel coupling beam section to the thickness of the shear walls. Experiments were carried out to determine the factors influencing the bearing strength of the connection between steel coupling beam and reinforced concrete shear wall. The test variables included the reinforcement details that confer a ductile behavior in connection between steel coupling beam and shear wall, i.e., the auxiliary stud bolts attached to the steel beam flanges and the transverse ties at the top and the bottom steel beam flanges. In addition, additional test were conducted to verify the strength equations of the connection between steel coupling beam and reinforced concrete shear wall. The proposed equations in this study were in good agreement with both our test results and other test data from the literature.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.7
• /
• pp.703-707
• /
• 2008

This paper designs and implements a software prober to support a more effective power analysis for Linux-based embedded systems by using power consumption data measured in hardware. The proposed software prober, which is included in a target system as a module, collects power data and provides a service to discover major power consumers in user functions of applications or kernel functions through time synchronization between the power data measured in hardware and software. In addition, we verified usefulness of the implemented software prober by running user applications on target systems.

• Geomechanics and Engineering
• /
• v.20 no.4
• /
• pp.333-343
• /
• 2020

Preventing or reducing the damage impact of lateral soil movements on piled foundations is highly dependent on understanding the behavior of passive piles. For this reason, a detailed experimental study is carried out, aimed to examine the influence of soil density, the depth of moving layer and pile spacing on the behavior of a 2×2 free-standing pile group subjected to a uniform profile of lateral soil movement. Results from 8 model tests comprise bending moment, shear force, soil reaction and deformations measured along the pile shaft using strain gauges and others probing tools were performed. It is found that soil density and the depth of moving layer have an opposite impact regarding the ultimate response of piles. A pile group embedded in dense sand requires less soil displacement to reach the ultimate soil reaction compared to those embedded in medium and loose sands. On the other hand, the larger the moving depth, the larger amount of lateral soil movement needs to develop the pile group its ultimate deformations. Furthermore, the group factor and the effect of pile spacing were highly related to the soil-structure interaction resulted from the transferring process of forces between pile rows with the existing of the rigid pile cap.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.720-725
• /
• 2008

This paper proposes a system architecture for USN with a service robot to provide more active assisted living services for elderly persons by monitoring their mental and physical well-being with USN environments at home, hospital, or silver town. Sensors embedded in USN are used to detect preventive measures for chronic disease. Logged data are transferred to main controller of a service robot via wireless channel in which the analysis of data is performed. For the purpose of handling emergency situations, it needs real-time processing on gathering variety sensor data, routing algorithms for sensor nodes to a moving sink node and processing of logged data. This paper realized multi-hop sensor network to detect user movements with biometric data transmission and performed algorithms on Xenomai, a real-time embedded Linux. To leverage active sensing, a mobile robot is used of which task was implemented with a priority to process urgent data came from the sink-node. This software architecture is anticipated to integrate sensing, communication and computing with real-time manner. In order to verify the usefulness of a proposed system, the performance of data transferring and processing on a real-time OS with non real-time OS is also evaluated.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.313-319
• /
• 2019

Finite field operations have played an important role in error correcting codes and cryptosystems. Recently, the necessity of efficient computation processing is increasing for security in cyber physics systems. Therefore, efficient implementation of finite field arithmetics is more urgently needed. These operations include addition, multiplication, division and inversion. Addition is very simple and can be implemented with XOR operation. The others are somewhat more complicated than addition. Among these operations, multiplication is the most important, since time-consuming operations, such as exponentiation, division, and computing multiplicative inverse, can be performed through iterative multiplications. In this paper, we propose a multiplexer based parallel computation algorithm that performs Montgomery multiplication over finite field using redundant basis. Then we propose an efficient multiplexer based semi-systolic multiplier over finite field using redundant basis. The proposed multiplier has less area-time (AT) complexity than related multipliers. In detail, the AT complexity of the proposed multiplier is improved by approximately 19% and 65% compared to the multipliers of Kim-Han and Choi-Lee, respectively. Therefore, our multiplier is suitable for VLSI implementation and can be easily applied as the basic building block for various applications.

• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.23-36
• /
• 2007

It is important that ubiquitous technology changes paradigm of thought, not simple definition in the 21st digital era. Characteristics of ubiquitous computing are pervasive, disappearing, invisible, calm through environment. As IT Technology develops, designers, computer scientists, chemists, performance artists cooperate in order to find out the best way to make desirable digital clothing in the future, with the merit of each part. Digital clothing defines clothes of new generation equipped computer, digital installations. Digital clothing design demands intercept of electromagnetic waves, light-weight and esthetic appearance, for it is attached high-technology equipment near body. The purpose of this study is to analyze design features of digital clothing according to ubiquitous characteristics. The methods of this study are documentary research of previous study and case study. In the theoretical study, ubiquitous characteristics are function-intensive by convergence, interactivity, embedded mobility and human & emotion-oriented attributes. Based on ubiquitous characteristics, digital clothing design classified function-intensive design by convergence, design for Interactivity and multi-sensible & emotion-oriented design, because embedded mobility is a basic element of ubiquitous environment. The early days digital clothing design is function-intensive design, and have esthetic appearances and design for interactivity increasingly. Recently digital clothing design is expressed multi-sensible and emotion-oriented design.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.99-107
• /
• 2010

In this paper a blind watermarking algorithm for digital image is presented. The proposed method operates in wavelet domain. The watermark is decomposed into 2D-IMFs using BEMD which is the 2-dimensional extension of 1 dimensional empirical mode decomposition. The CDMA based on SS technique is applied to watermark embedding and detection process. In the watermark embedding process, each IMF of watermark is embedded into middle frequency subimages in wavelet domain, so subimages just include partial information about embedded watermark. By characteristics of BEMD, when the partial information of watermark is synthesized, the original watermark is reconstructed. The experimental results show that the proposed watermarking algorithm is imperceptible and moreover is robust against JPEG compression, common image processing distortions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2012

A Smartphone has an ability accessing Internet by URL stored in NFC(Near Field Communication) Tag for storing the information of items, blogs and web pages. Because the system works through the Internet with URL, however, it needs to pay some costs like communication fee and time. If we can store the web page on the tags, we can save the communication overhead. But they have too small memory to store it. In this paper, we introduce the Micro-Webpage technology which can be stored in NFC tag or QR(Quick Response) code. To make a Micro-Webpage, we remove control tags from the web page to leave a user original content. The removed control tags are stored in our smartphone application as a template. The user content is also compressed to a smaller one by an lossless compression algorithm. When a tag is read, the stored content is decompressed and, it is combined with the template to make the original web page. We have implemented a prototype of Micro-Webpage system on Android platform and confirmed that the prototype has reasonable performance improvements in saving memory and loading web page time.