• 한국농공학회논문집
• /
• 제48권6호
• /
• pp.79-85
• /
• 2006

A simulation was done to analyze the seepage problems due to seawater intrusion through the embedded rock layers on heterogeneous layers of sea-dike. Numerical analysis with SAMTLE(developed by author) was done by taking various relative permeability $ratio(R_r/R_e)$. These results showed, when the sed-dike is newly designed, operated, and maintained considering the safety of sea-dike in seepage problems, these embankment materials are prudently chosen. The permeability of the soil materials, within the range of salinity management in freshwater, is comparatively high, however, the permeability of rock materials for bottom rock layer is low. Therefore, when the relative permeability $ratio(R_r/R_e)$ is bellow 10 it is safety in seepage problems of sea-dike.

• 한국농공학회논문집
• /
• 제57권1호
• /
• pp.1-9
• /
• 2015

In this study it was adopted on sea dike monitoring that the safety monitoring with statistical limits which was adapted usually on safety monitoring by measuring pressures, stresses or deformations. And also the hydraulic head loss rate change according to passage of time was calculated for the purpose of safety monitoring. Safety monitoring by setting the statistical limit on the measured pore water pressure graphs need to be supplemented with an additional method of monitoring because the difference between the rise and fall of the tide was irregular. Safety monitoring by the limits set from values predicted by linear regression and standard errors on the hydraulic head loss graph was not affected by irregularity of tide. But if the condition of an embankment is changed gradually and slowly, it will not be detected on the hydraulic head loss graph. The graph of hydraulic head loss rate for every 24 hours vs date showed clearly that the sea water blocking state was getting better or not even though it was changed gradually and slowly.

• 한국해양공학회지
• /
• 제14권3호
• /
• pp.61-65
• /
• 2000

The estimation of soil stabilization is of great importance concerning the construction of structures on weak soil. A typical model of soil stabilization is considered as replacement, which is based on ground at failure due to direct loading on weak soil. The calculation of the line of predicting settlement was carried out using RPL and DIKE programs. The DIKE program is showing a tendency to excel totally about this embankment of the seadike. Hereafter, This program will be contributed widely to the construction of offshore structures on weak soil.

• 한국관개배수논문집
• /
• 제13권2호
• /
• pp.254-261
• /
• 2006

We applied electrical resistivity survey using modified pole-pole array and small-loop electromagnetic survey to delineate the zone of seawater inflow through a tide embankment. The tide embankment is generally affected by tidal variation and has low resistivity characteristic due to the high saturation of seawater. For this reason, the electrical resistivity survey using modified pole-pole array, which is relatively more effective to the conductive media, was carried out to detect the inflow zone of seawater and small-loop electromagnetic survey using multi-frequency with 300 to 20,010 Hz was conducted. As a result of both electrical resistivity survey using modified pole-pole array and small -loop electromagnetic survey, these survey methods are found to be quite effective for investigation of seawater inflow zone in the sea dike.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.87-99
• /
• 1992

A mathematical model, UNSATR which predicts the seepage flow through the body of dike especially under the tidal fluctuation has been developed. This model has been revised from UNSAT2 model which was developed on the basis of the saturated-unsaturated theory by Neuman. UNSATR has been verified and applied to the hydraulic model in order to estimated the seepage quantity, the formation of free water surface etc. The results lead to the following conclusions : 1. Seepage rates between the mathematical model and hydraulic model experiment are very similar to each other both in constant and transient water level conditions. 2. The lapsed time to be steady state of the free water surface becomes late as the tidal levels are relatively low mainly due to the seepage flow from the unsaturated zone of the body of dike. 3. Under the transient state of water levels, owing to the flow from the unsaturated domain, streamlines crossing to the free water surface are found and time lag during a falling tide may allow the free water surface inside the body of dike to stand at a high level than the outside water level. 4. The utility and validity of UNSATR model are convinced when the analyses on seepage problems through the porous embankment of the soil structures on the conditions of the steady and unsteady states are carried out.

• 한국농공학회지
• /
• 제35권2호
• /
• pp.43-56
• /
• 1993

The laboratory tests are performed on how the liquefaction potential of the sea dike structures on the saturated sand or silty sand seabed could be affected due to earthquake before and after construction results are given as follows ; 1. Earthquake damages to sea dike structures consist of lateral deformation, settlement, minor abnormality of the structures and differential settlement of embankments, etc. It is known that severe disasters due to this type of damages are not much documented. Because of its high relative cost of the preventive measures against this type of damages, the designing engineer has much freedom for the play of judgement and ingenuity in the selection of the construction methods, that is, by comparing the cost of the preventive design cost at a design stage to reconstruction cost after minor failure. 2. The factors controlling the liquefaction potential of the hydraulic fill structure are magnitude of earthquake(max. surface velocity), N-value(relative density), gradation, consistency(plastic limit), classification of soil(G & vs), ground water level, compaction method, volumetric shear stress and strain, effective confining stress, and primary consolidation. 3. The probability of liquefaction can be evaluated by the simple method based on SPT and CPT test results or the precise method based on laboratory test results. For sandy or silty sand seabed of the concerned area of this study, it is said that evaluation of liquefaction potential can be done by the one-dimensional analysis using some geotechnical parameters of soil such as Ip, Υt' gradation, N-value, OCR and classification of soils. 4. Based on above mentioned analysis, safety factor of liquefaction potential on the sea bed at the given site is Fs =0.84 when M = 5.23 or amax= 0.12g. With sea dike structures H = 42.5m and 35.5m on the same site Fs= 3.M~2.08 and Fs = 1.74~1.31 are obtained, respectively. local liquefaction can be expected at the toe of the sea dike constructed with hydraulic fill because of lack of constrained effective stress of the area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1466-1472
• /
• 2010

In order to construct extremely large scale of sea dike like Saemanguem dike, extremely large amount of mass of rock are needed. In this case, it is general methods to estimate required amount of rock mass based on characteristics of consolidation settlement and bearing capacity of seabed, because it is impossible to estimate exact amount of rock material based on varied seabed condition.. Even in this general methods, it is very few case to manage rock mass amount by estimation of actual input rock mass but the main point is focused on the final section formation considering of designed section and reserve embankment, so excessive or underestimating result of rock mass would be occurred surely. This general methods is not resonable in the points of economic and stable. In this study, optimum construction management method of rubble mound in the 3rd section construction of Saemanguem sea dike is suggested based on comparing required rock mass estimating from consolidation settlement theory with actual input rock mass. It is found out that the optimum input quantity of rock mass is about $1,900{\sim}2,000m^3$/day.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2002년도 정기총회 및 제4회 특별심포지움
• /
• pp.179-195
• /
• 2002

본 문은 수리시설물의 누수탐지를 위한 물리탐사의 적용성에 대해서 검토했다. 저수지 및 방조제의 누수탐지를 위해서 전기비저항탐사 및 자연전위 (SP)탐사가 실시되고 있으며, 많은 사례축적으로부터 그 적용성이 입증되고 있다. 그러나, 향후 수리시설물을 보다 정확하게 누수지점을 탐지하고, 효율적인 유지관리를 위해서는 다음과 같은 사항이 요구된다. 1) 단일 탐사보다는 전기비저항탐사와 자연전위탐사를 병용 실시하여 종합적으로 해석함으로서 보다 신뢰성을 높일 수 있다. 2) 전기비저항탐사 결과로부터 누수취약구간을 정확하게 파악하기 위해서는 제체의 전기비저항을 좌우하는 토질의 물성을 잘 파악하는 것이 무엇보다도 중요하다. 3) 측정치의 보다 높은 신뢰성을 얻기 위해서는 3차원 탐사의 도입이 시급하다. 4) 수리시설물을 효율적이고 경제적으로 유지관리하기 위해서는 모니터링 계측시스템의 필요성이 요구된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2010년도 학술대회 초록집
• /
• pp.103-106
• /
• 2010

• 지구물리와물리탐사
• /
• 제5권4호
• /
• pp.257-261
• /
• 2002

이 연구에서는 수리시설물의 누수 문제에 대한 자연전위법의 적용성을 규명하기 위하여 현장 탐사와 수치모델링을 수행하였다. 이 연구를 수행한 저수지들의 경우는 일반적인 흙 댐의 손상 형태 중 제체 양안 접합부를 통한 누수, 파이핑 형태의 제체를 통한 누수, 사면의 활동파괴와 다짐불량에 의한 구조물 자체 변위가 복합적으로 작용하는 누수가 관찰되었다. Sill(1983)이 개발한 자연전위 모델링 코드를 이들 수리시설물에 적합하도록 변형 개선시켜 누수 모델에 적용한 결과 야외 탐사자료와 유사한 자연전위 이상곡선을 얻을 수 있었다. 따라서 저수지의 경우 누수 유형을 구분한 후 자연전위 모델링을 수행하면 누수 구간 및 누수 유로에 대한 효과적인 규명이 가능한 것으로 밝혀졌다. 방조제의 경우는 해수 유입으로 발생되는 유동전위에 대한 자연전위 모니터링 결과를 조석 변화와 대비 검토한 결과, 변화양상이 서로 일치되어 나타나므로 누수 지점 탐지와 더불어 누수 추세를 밝히는데 모니터링 기법이 효과적임을 알 수 있었으며, 자연전위 모델링을 수행한 결과는 해수 유입에 의한 자연전위 이상이 잘 재현됨을 확인하였다.