• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.48-52
• /
• 2010

This paper examined the effects of specimen elongation on the electrostatic electrification voltages when polypropylene film specimens with 500%, 650% and 700% elongations were rotated at 1550 rpm. The results were as follows. The decease of electrification voltage was not measured according to the time elapse, in case of elongated specimens with 70% environment humidity. As +10 kV was applied to the specimens with 650% elongations, the electrostatic electrification voltages were increased by the effect of environment humidity (1.23~1,25 kV at 50~60% humidity, and 1,46 kV at 70% humidity). The voltages were decreased to 1.2 kV at 700% elongation. As -10 kV was applied to the specimens with 500%, 650% and 700% elongations, the electrostatic electrification voltages were negatively increased with the increase of environment humidity and the elongation of specimens.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.182-187
• /
• 1996

Deformation characteristics of miniature plate tensile specimens have been studied to develop the thickness requirement and a correlation to estimate the mechanical properties of bulk material from miniature specimen data. The material used was a SA 508 C1.3 reactor pressure vessel steel and the thicknesses of miniature tensile specimens varied from ().12 m to 2 mm. The effects of thickness on the tensile deformation properties such as strength, ductility, and necking characteristics were analyzed. The yield and ultimate tensile strengths were independent of specimen thickness when the thickness was larger than about 0.2 mm. The uniform and total elongations decreased as the specimen thickness decreased. It was also observed that the uniform strain component in the width direction decreased with decrease in the specimen thickness, however, that in the thickness direction was rather constant in total thickness range studied. Based on this observation and a relationship between the necking angle and the ratio between strain components, a correlation between the uniform elongations of miniature specimen and standard specimen was derived. The uniform elongations calculated by this new correlation agreed well with the measured values.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1390-1393
• /
• 2005

The hardening model based on the dislocation mechanics is employed to study the experimentally observed high tensile elongations of NiAl along the [110] orientation at intermediate temperatures. In the hardening model proposed, a mobility of dislocation is assumed to be restricted to glide through the slip plane by forest dislocation and thermally activated cross-slip event. Overall deformation behavior of NiAl was greatly influenced by temperature-dependent dislocation mobility that both experimental and simulated yield stresses decreased as temperature increased. The results of simulation showed anomalous hardening behaviors analogous to those of experiment at certain circumstances. This behavior occurred due to the hardening contributions generated by cross-slip events that disable the dislocation motion in the primary slip systems. By comparing simulation results with experiments, it is confirmed that the proposed hardening model can represent anomalous tensile elongations due to the hardening by forest dislocations and cross-slip events.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.6
• /
• pp.733-739
• /
• 1999

A modified low-Re $k-\varepsilon$ model is used for the calculation of drag-reducing turbulent flow by polymer injection in a pipe. With the viscoelastic model, molecular viscosity in the definition of turbulent viscosity is related to elongations viscosity of the solution to account for the effects of drag reduction. Finite volume method is used for the discretization, and power-law scheme is used as a numerical scheme. Computed dimensionless velocity profiles are in good agreements with the experimental data in case of low drag reductions. However, in case of high drag reductions, they deviate largely from the measurements in the central zone of the flow field.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.244-254
• /
• 2022

For tensile tests, Vickers hardness tests and microstructure tests, plate-type and box-type specimens of austenitic 316L stainless steels were produced by a conventional machining (CM) process as well as two additive manufacturing processes such as direct metal laser sintering (DMLS) and direct metal tooling (DMT). The specimens were irradiated up to a fast neutron fluence of 3.3 × 10⁹ n/cm² at a neutron irradiation facility. Mechanical performance of the unirradiated and irradiated specimens were investigated at room temperature and 300 ℃, respectively. The tensile strengths of the DMLS, DMT and CM 316L specimens are in descending order but the elongations are in reverse order, regardless of irradiation and temperature. The ratio of Vickers hardness to ultimate tensile strength was derived to be between 3.21 and 4.01. The additive manufacturing processes exhibit suitable mechanical performance, comparing the tensile strengths and elongations of the conventional machining process.

• Journal of the Korean Home Economics Association
• /
• v.43 no.2
• /
• pp.115-126
• /
• 2005

Environmentally and human compatible chitosan were pretreated on cotton fabrics which were then dyed with 100% persimmon juice. The chitosan concentration was 1% and the chitosan types were high molecular weight chitosan (1980cps), low molecular weight chitosan (18첸), chitosan oligomer and water soluble chitosan. The properties of the fabric surfaces, the dyeabilities, the color fastnesses, the antibacterial activities, the strengths, the elongations and the drape stiffnesses were evaluated. The properties of the chitosanpretreated, persimmon juice-dyed cotton fabrics (CLP) were compared to those of the untreated (CN), chitosan treated (CL) and persimmon juice-dyed fabrics (CP). The results were as follows. The fibers extruded from the surface of CN decreased on CP. The air between the fibers within CN were substituted by chitosan solution or persimmon juiceand decreased within CLP according to SEM observations. The effects of chitosan treatment, the chitosan molecular weights and the degrees of deacetylation of chitosan on the dyeabilities of the persimmon juice-dyed cotton fabric were not distinct. The curing after chitosan padding improved the dyeabilities of CLP compare to noncuring. The strengths of CP decreased and those of CL increased, compared to those of CN. The strengths of CLP were greater than those of CP. The elogations of CP and CL were greater than those of CN. The strengths and elongations of CLP were greater than those of CN. The chitosan treatments improved the strengths but not the elongations. The drape stiffnesses of CL, CP and CLP were greater than those of CN. The antibacterial activites of chitosan pretreated, persimmon juice-dyed cotton fabrics against Staphylococcus aureus were increased by more than 98% by persimmon juice.

• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.257-264
• /
• 2011

Multilayer(clad) sheets, composed of two or more materials with different properties, are fabricated using the roll-bonding process. A good formability is an essential property for a multilayered sheet in order to manufacture parts by plastic deformation. In this study, the influences of temperature and strain rate on the plastic properties of stainless steel-aluminum-magnesium multilayered(STS-Al-Mg) sheets were investigated. Tensile tests were performed at various temperatures and strain rates on the multilayered sheet and on each separate layer. Fracture of the multilayered sheet was observed to be temperature-dependent. At the base temperature of $200^{\circ}C$, all materials fractured simultaneously. At lower temperatures, the Mg alloy sheet fractured earlier than the other materials. Conversely, the other materials fractured earlier than the Mg alloy sheet at higher temperatures. The uniform and total elongations of the multilayered sheet were observed to be higher than that of each material at a temperature of $250^{\circ}C$. Larger uniform elongations were obtained for higher strain rates at constant temperature. The same trend was observed for the Mg alloy sheet, which exhibited the lowest elongation among the three materials. The tensile strengths and elongations of the single layer sheets were compared to those of the multilayer material. The strength of the multilayered sheet was successfully calculated by the rule of mixture from the values of each single layer. However, no simple correlation between the elongation of each layer and that of the multilayer was obtained.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.325-330
• /
• 1989

This study was undertaken to assess the effects of seed treatment and soil moisture content on mesocotyl elongation in rice seedlings. The effect of the high temperature pre-treatment on the mesocotyl elongation was 7 times as great as the control (non treatment). The mesocotyl lengths were of maximum value at the 8％ soil moisture, but of minimum value at the 16％ soil moisture plot, showing decreasing trend of mesocotyl length as soil moisture increases. The mesocotyl elongations were much greater at the ABA treated plot than at the GA$^3$, IAA and Kinetin plots. The relationship between the mesocotyl and excised root elongations was not evident, but the weight of excised roots became heavier with longer mesocotyl length.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.05a
• /
• pp.2-7
• /
• 1994

The dynamic fatigue life equation is applied to uniaxial tensile test. The resultant equations far the surface energy and fracture toughness are calculated with the data from the tensile test and compared with the ones from ASTM E399 test. During the crack propagation under model loading, the material of the crack tip undergoes the process of the elastic-plastic deformation in the uniaxial tensile test. The surface energy per unit area is proportional to the ratio of plastic and elastic elongations. The calculated fracture toughness of the metals are very well coincident to the ASTM E399's test results.

• Journal of Korea Foundry Society
• /
• v.40 no.3
• /
• pp.85-96
• /
• 2020

The effect of an aluminum scrap addition ratio on the tensile and solidification cracking properties of the AC4A aluminum alloy in the as-cast state and heat-treated state were investigated in this study. Generally, the expected problem of using scrap in aluminum casting is an increase of hydrogen and Fe element inside the aluminum melt. Another issue is an oxide film which has a weak interface with the molten aluminum and acts as potent nucleation sites for internal porosity and crack initiation. Solidification cracking is one of the critical defects that must be resolved to produce high quality castings. A conventional evaluation method for solidification cracking is a relative and qualitative analysis method which does not provide quantitative data on the thermal stress in the solidification process. Therefore, a newly designed solidification cracking test apparatus was used in this study, and the device can provide quantitative data. As a result, after conducting experiments with different scrap addition ratios (0%, 20%, 35%, 50%), the tensile strengths and elongations in the as-cast state were 214, 187.7, 182.1 and 170.4MPa and 4.6%, 3.4%, 3.1% and 2.3%, respectively. In the case of the T6 heat-treated state, the tensile strengths and elongations were 314.9, 294.6, 293.1 and 271.1MPa and 5.4%, 4.6%, 3.8% and 3.1%, respectively. The strength of the solidification cracking was 3.1, 2.4, 2.2and 1.6MPa as the scrap addition ratio increases.