• 약학회지
• /
• 제22권4호
• /
• pp.201-206
• /
• 1978

The analysis of elemental sulfur by polarography has already been reported in the literature. Only a discussion of the more important factors influencing the analysis is here presented. (1) The effects of pH on the reduction of elemental sulfur are pronounced and the use of buffered solutions for the analysis of elemental sulfur is necessary. The authors found that a pH of 4-6 was found to be reproducible polarograms by use of D.C. polarograph. However, in alkali solvents the plateau of elemental sulfur has a pronounced dip if the concentration of sulfur is as much as 30ppm. (2) A.C. polarographic method shows a very high sensitivity in the case of sulfur reduction, so that the very low concentration of sulfur can easily be determined (about 1ppm). (3) The characteristics of sulfur wave can be formulated according to Stackelberg-Hauck-Hans equation. It was found that the curve of the peak potential of elemental sulfur in A.C. polarography versus logarithm of sulfur concentration was obtained to be straight line with the slope of 29.6 millivolts. This result was well agreed with theoretical consideration. (4) It was assumed that this polarographical methods were applicable to micro-analysis of elemental sulfur in crude oil and its petrochemical products, precipitated sulfur, and sulfur ointments with accuracy and rapidity.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.453-457
• /
• 2021

Lithium-sulfur (Li-S) batteries are one of attractive energy conversion and storage system based on high theoretical specific capacity and energy density with low costs. However, volatile nature of elemental sulfur is one of critical problem for their practical acceptance in industry because it considerably affects electrode uniformity during electrode manufacturing. In this work, polymeric sulfur composite consisting of ionic liquid (IL) are suggested to reduce volatility nature of elemental sulfur, resulting in better processibility of the Li-S cell. According to systematic spectroscopic analysis, it is found that polymeric sulfur is consisting of repeating units combining with elemental sulfur and volatility of them is negligible even at high temperature. In addition, the IL-embedded polymeric sulfur shows moderate cycle performance compared to the cell with elemental sulfur. From these results, it is found that the IL-embedded polymeric sulfur composite is applicable cathode candidate for the Li-S cell based on their excellent non-volatility as well as their superior electrochemical performance.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.48-52
• /
• 2000

An autotrophic sulfur oxidizer, Thiobacillus sp. ASWW-2, was isolated from activated sludge, and its sulfur oxidation activity was characterized. Thiobacillus sp. ASWW-2 could oxidize elemental sulfur on the broad range from pH 2 to 8. When 5-50 g/L of elemental sulfur was supplemented as a substrate, the growth and sulfur oxidation activity of Thiobacillus sp. ASWW-2 was not inhibited. The specific sulfur oxidation rate of strain ASWW-2 decreased gradually until sulfate was accumulated in medium up to 10 g/L. In the range of sulfate concentration from 10 g/L to 50 g/L, the sulfur oxidation rate could keep over $2.0g-S/g-DCW{\cdot}d$. It indicated that Thiobacillus sp. ASWW-2 has tolerance to high concentration of sulfate.

• 한국미생물·생명공학회지
• /
• 제25권4호
• /
• pp.354-358
• /
• 1997

Some sulfur coompounds dissimilation characteristcs of Thermococcus sp. DT1331 were studied. DT1331 had ether-like lipid compounds in addition to esters in the cell membrane. The specific growth rates of DT1331 decreased with increasing head spaces of the cultures. However, when the ratio of head space volume to medium volume was 5.60, the strain showed no growth. DT1331 showed vigo- rous growth with 1% or more elemental sulfur addition. Cystine could substitute elemental sulfur and DT1331 showed moderate growth with 0.1% or more cystine concentration. The specific growth rate and maximum cell concentration of Thermococcus sp. DT1331 in the presence of elemental sulfur were 0.80 hr$^{-1}$ and 2.0 x 10$^{8}$ cells/ml, respectively, while they were 0.67 hr$^{-1}$ and 1.1 x 10$^{8}$ cells/ml, respectively in the presence of cystine.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1853-1855
• /
• 2005

• 한국미생물·생명공학회지
• /
• 제34권4호
• /
• pp.338-341
• /
• 2006

The growth characteristics of sulfur-oxidizing bacteria, Acidithiobacillus thiooxidans AZ11, MET, and TAS were investigated in mineral salt media supplemented with elemental sulfur of 1$\sim$50 g $L^{-1}$. The sulfur oxidation rates of A. thiooxidans. MET and TAS increased highly with increasing sulfur concentration up to 10 g L$^{-1}$, but the rates increased slowly in sulfur concentration over 10 g L$^{-1}$. A. thiooxidans AZ11 showed the parallel increase of sulfur oxidation rate until sulfur concentration increased up to 40 g L$^{-1}$. The maximum sulfur oxidation rates (V$_{max}$) of AZl1, MET and TAS were 1.88, 1.38 and 0.43 g S L$^{-1}$ d$^{-1}$, respectively. The maximum specific growth rates (${\mu}_{max}$) of AZ11, MET, and TAS were 0.33 d$^{-1}$, 0.30 d$^{-1}$ and 0.45 d$^{-1}$, respectively. Although MET and TAS couldn't grow at sulfate concentration of 40 g L$^{-1}$, AZ11 could grow in the presence of 58 g L$^{-1}$ sulfate, the final oxidation product of elemental sulfur.

• 한국토양비료학회지
• /
• 제44권1호
• /
• pp.22-28
• /
• 2011

With the increasing cultivation of acid-loving plants such as blueberries, the artificial acidification of soils is frequently required. This research was conducted to determine the application rates of elemental sulfur (S) required in the soil acidification for blueberry cultivation. Laboratory incubation experiment was conducted to acidify three arable soils (pH 6-7) of different texture to pH 4.5-5.0 by the addition of varying amounts of elemental S. All rates of elemental S addition reduced soil pH, although the efficacy of acidification was related to the application rate and soil characteristics. pH reduction was slow in sandy loam soil, and the final equilibrium pH was obtained after 60, 43, and 30 days of incubation in sandy loam, loam, and silty clay, respectively. Although the final pHs obtained after 93 days of incubation were not significantly different among the three soils, the equilibrium pH was relatively higher in soil of higher clay content in the application rates of 1.5-2.0 g S $kg^{-1}$ soil. The estimated amounts of elemental S required in lowering pH to 4.5-5.0 were 0.59-1.01, 0.67-1.03, and 0.53-0.88 g S $kg^{-1}$ for sandy loam, loam, and silty clay, respectively. The lowest estimated amount of elemental S in the acidification of silty clay soil was attributable to the low organic matter content. For clay soils containing optimum level of organic matter, the application rates of elemental S should be much higher than those values estimated in this research. Soil acidification did not significantly increase the available concentrations of Ca, Mg and K. Extractable Cu and Zn was not greatly affected by the acidification, but extractable Fe, Mn, and Al in the acidified soils were higher than those found in non-acidified soils. Such increases in solubility are attributable to the dissolution of oxides and hydroxides of the elements.

• 한국포장학회지
• /
• 제26권3호
• /
• pp.125-131
• /
• 2020

Carrageenan-based functional films were prepared by adding two different types of sulfur nanoparticles (SNP) synthesized from sodium thiosulfate (SNPSTS) and elemental sulfur (SNPES). The films were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and thermal gravimetric analysis (TGA). Also, film properties such as UV-visible light transmittance, water contact angle (WCA), water vapor permeability (WVP), mechanical properties, and antibacterial activity were evaluated. SNPs were uniformly dispersed in the carrageenan matrix to form flexible films. The addition of SNP significantly increased the film properties such as water vapor barrier and surface hydrophobicity but did not affect the mechanical properties. The carrageenan/SNP composite film showed some antibacterial activity against foodborne pathogenic bacteria, L. monocytogenes and E. coli.

• 생명과학회지
• /
• 제23권5호
• /
• pp.676-681
• /
• 2013

퍼클로레이트(${ClO_4}^-$)는 지표수 및 토양/지하수에서 검출되는 신규 오염물이다. 퍼클로레이트 환원세균(PRB)은 ${ClO_4}^-$를 무해한 최종산물로 전환시킬 수 있으므로 ${ClO_4}^-$ 제거는 미생물을 이용한 방법이 가장 적절한 것으로 알려졌다. 이전 연구[3]를 통해 원소 황 입자와 활성슬러지를 이용하여 독립영양방식의 ${ClO_4}^-$ 제거가 가능하다는 실험적 증거가 제시되었다. 입자상 황은 비교적 값이 저렴하고, 활성슬러지는 하수처리장으로부터 쉽게 구할 수 있는 장점이 있다. 그래서 본 연구에서는 원소 황을 전자공여체로 사용하였을 때 여러 환경요인이 활성슬러지 미생물의 ${ClO_4}^-$ 분해에 미치는 영향을 회분반응으로 조사하였다. 이 회분반응의 결과를 통해 활성슬러지 미생물에 의한 독립영양방식의 ${ClO_4}^-$ 분해를 위한 최적조건을 도출하였다. 또한 활성슬러지로부터 농화배양된 황산화 PRB는 활성슬러지보다 ${ClO_4}^-$ 제거능이 우수한 것으로 회분반응 결과 나타났다. 그래서 본 연구결과는 최적조건 적용 및 농화배양된 접종균을 통해 원소 황과 활성슬러지를 이용한 독립영양방식의 ${ClO_4}^-$ 제거를 향상할 수 있다는 것을 나타내었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.209-212
• /
• 2000

As a bench-scale study, transformation of nitrate to nitrogen gas under anoxic condition was determined by using autotrophic denitrifiers containing Thiobacillus denitrificans and elemental sulfur as an electron donor. The research objective is to measure the basic kinetic parameters of autotrophic denitrification reaction on the removal efficiency of nitrate. The results showed that nitrate was almost completely transformed to nitrite in the first 4 days of column operation. After 2 days of accumulation of nitrite, its concentration slowly decreased and the compound was detected less than 0.5 mg/L in 14 days. In the experiment, sulfate concentration in the effluent was the 70~90 mg-S/L and the pH was maintained around pH 7.5. When nitrate concentration of bank filtrate in the real field is considered, this sulfate concentration seems to be acceptable. At 17 cm from the bottom of the column, the effluent showed the highest nitrite concentration, and nitrate concentration decreased rapidly to the Point of 33 cm from the bottom. The results suggest that an appropriate thickness of permeable reactive barriers is about 30 cm.