• Journal of the Korean Society of Industry Convergence
• /
• 제2권2호
• /
• pp.187-194
• /
• 1999

Closed-die forging of spline was analysed using the upper bound elemental technique, Two different forging methods, denoted here as side extrusion-forging and upset forging, were proposed, The kinematically admissible velocity fields for each of the forging methods, which could express trapezoidal, rectangular and serration tooth forms, were presented. Upper bounds to forging loads and deformed configurations were predicted using the velocity fields. Theoretical results were compared with experimental ones. Experiments with lead were carried out at room temperature where grease was used as a lubricant. The present investigation revealed that analytical forging loads were reduced by using the side extrusion-forging but the upset forging could improve configuration of the final forged splines.

• The Journal of Korean Academy of Prosthodontics
• /
• 제25권1호
• /
• pp.95-118
• /
• 1987

This study was undertaken to observe the elemental transition of Interface depending on different pretreatment methods, the number of filings, the kinds of porcelain powders and the various alloys in ceramo-metal restoration. The materials used in this study were Pors-on $4^{(R)}$ and Ceramco porcelain powder to compare the differences depending on the pretreatement methods and the number of firings. Ceramco porcelain powder and Vita porcelain powder were used to compare the differences of elemental transition depending on the porcelain powders. The $Parasil^{(R)},\;PGV^{(R)}$ and Pors-on $4^{(R)}$ as Pd-Ag alloy were used to compare the difference of elemental transition depending on the various alloys. The pretreatment methods were : no treatment, treatment under vacuum and air, treatment with 50 % hydrofluoric acid and double heat tretament. The number of firings were 3, 5 and 7 repeated firings All specimens were observed by SEM and concentration of elements were analyzed quantitatively with EPMA The results of this study were obtained as follows : 1. In the groups of air-treatment, concentration of Sn were the highest and widest. A high concentration of In were in the groups of vacuum and air treatment. 2. There were no significant differences in concentration of Sn between the group of vacuum, 5 minutes hydrofluoric acid and double heat treatment. (p>0.05) 3. As the period of time of hydrofluoric acid treatment increased, not only were the trace elements reduced but the main components such as Pd and Ag were also reduced. 4. Concentration of Sn and In increased and diffused with repeated firings but 5 repeated and 7 repeated firings groups had no significant differences. (p>0.05) 5. Sn were more concentrated in the group of Ceramco porcelaion powder than Vita porcelain powder. 6. The higher concentration of trace elements in the alloy, the more increasing concentration of Sn and In in the interface.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.79-95
• /
• 2017

A number of field studies have provided evidence that biomass burning is one of the major global sources of atmospheric particles. In this study, we have collected $PM_{2.5}$ emitted from biomass burning combusted at open burning and laboratory chamber situations. The open burning experiment was conducted with the cooperation of 9 farmers in Chiba Prefecture, Japan, while the chamber experiment was designed to evaluate the characteristics of chemical components among 14 different plant species. The analyzed categories were $PM_{2.5}$ mass concentration, organic carbon (OC), elemental carbon (EC), ionic components ($Na^+$, ${NH_4}^+$, $Ca^{2+}$, $Mg^{2+}$, $K^+$, $Cl^-$, ${NO_3}^-$ and ${SO_4}^{2-}$), water-soluble organic carbon (WSOC), water-insoluble inorganic carbon (WIOC), char-EC and soot-EC. OC was the dominant chemical component, accounting for the major fraction of primary $PM_{2.5}$ derived from biomass burning, followed by EC. Ionic components contributed a small portion of $PM_{2.5}$, as well as that of $K^+$. In some cases, $K^+$ is used as biomass burning tracer; however, the observations obtained in this study suggest that $K^+$ may not always be suitable as a tracer for biomass burning emissions. Also, the results of all the samples tested indicate relatively low values of char-EC compared to soot-EC. From our results, careful consideration should be given to the usage of $K^+$ and char-EC as indicators of biomass burning. The calculated ratios of WSOC/OC and WIOC/OC were 55.7% and 44.3% on average for all samples, which showed no large difference between them. The organic materials to OC ratio, which is often used for chemical mass closure model, was roughly estimated by two independent methods, resulting in a factor of 1.7 for biomass burning emissions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제10권7호
• /
• pp.1642-1647
• /
• 2009

Changes in aerosol characteristics during 2006 ${\sim}$2008 Asian dust events in Cheoan were investigated by measuring mass, ion and elemental concentrations of fine and coarse particles. The average mass concentrations of daily TSP, PM10, PM2.5 were 214.9, 160.3, and 95.9${\mu}\;g/m^3$during Asian dust events, which were 3.08, 2.58, and 1.95 times higher than Non-asian dust events. The maximum concentrations of TSP, PM10, and PM2.5 were 850.1, 534.4, and 233.3${\mu}\;g/m^3$, which were 12.19, 8.60, and 4.76 times higher, respectively. Increases in ion concentrations were not significant during Asian dust events, but elemental concentrations including soil components such as Fe, Al, Ti increased by 17.1 and 43.4 times for fine and coarse particles, respectively. The results clearly indicate that metallic components from soil constituents were the major components in Asian dusts sampled at Cheonan.

• Journal of Korean Society for Atmospheric Environment
• /
• 제12권2호
• /
• pp.159-165
• /
• 1996

In order to study the scavenging mechanism as a final goal, the characteristics of chemical components in the rain water were examined as a function of the amount of rainfall. The rain drops were collected sequentially with a rainfall interval amount of each 0.1 .sim. 0.5 mm from the beginning of rain. Rain water was separated into the soluble and insoluble components and the concentrations of 15 elements in both components were determined by the PIXE analysis. The elemental cencentrations decreased quickly till about 0.3 .sim. 0.5 mm of rainfall was obtained and then decreased gradually afterward. Fe, Ti, and Si in the aerosol particles caught in rain water were in high insoluble state. In contrast, almost whole of S and Cl were dissolved in rain water.

• Journal of the Korean Chemical Society
• /
• 제7권3호
• /
• pp.207-210
• /
• 1963

"Astragalus Membranaceus Bunge", which is a medical herb, grows wild in Manchuria and Korea, is cultivated today in Korea. Any literature about the organic components of "Astragalus Membranaceus Bunge" has been extracted with methanol referring to a literature of "Panax Ginseng C.A. Meyer" and two kinds of colorless crystals were obtained. After recrystallization in absolute alcohol, the melting point has been measured. The one kind was $181-182^{\circ}C$ and the others, $184-186{\circ}C$ respectively. It does not contain nitrogen, sulfur and halogen. By Liebermann's reaction, the one kind was not a carbohydrate but might be a Saponin. Through paper chromatography, taste, melting point, spectrophotometry, and elemental analysis, it was concluded that the other was Sucrose. It has been notified that the compound can be crystallized at the proper temperature, purity, and concentration of the solution and also solvent system.

• Journal of Korean Society for Atmospheric Environment
• /
• 제20권2호
• /
• pp.143-151
• /
• 2004

The chemical composition of PM$_{2.5}$ was measured at Gosan, Jeju for two weeks each in November 2001 and spring 2002. In the latter part of the measurement period of November 2001, designated as the polluted period in this work, secondarily formed ion components as well as primarily emitted elemental carbon were high. PM$_{2.5}$ mass concentration was also high in this polluted period compared with the yellow sand period, in which daily average of PM $_{10}$ peaked up to 520 $\mu\textrm{g}$/㎥. Increase of major components of anthropogenic origin in the polluted period was not correlated with the variation in sea salt components while increase of crustal components in the yellow sand period was highly correlated with the variation in sea salt components. Trace elements were generally higher in the yellow sand period; however, toxic heavy metals such as zinc, cadmium and lead were the highest in the polluted period.d.d.d.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 한국대기환경학회 2007년도 추계학술대회 논문집
• /
• pp.303-304
• /
• 2007

• Proceedings of the KSR Conference
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.229-234
• /
• 2003

In this paper, the elemental components and improving purpose in advanced safety management system are reviewed to cope with a railway fire accident. And a considering procedure(V-cycle) of long-term plan for railway fire safety improvement is proposed. For the purpose of preventing recurrence of accident, items which have to be considered in the course of accident investigation and cause analysis are presented according to the stage of investigation activity.

• Korean Journal of Pharmacognosy
• /
• 제1권2호
• /
• pp.31-32
• /
• 1970

Silica gel column chromatography on the ether extract from the fruits of Angelica koreana $M_{AXIMOWICZ}$ gave two kinds of crystalline products of coumarin. The following furocoumarins-imperatorin and bergapten has been identified by elemental analysis, IR, NMR spectra and physico-chemical tests.