• 소성∙가공
• /
• 제13권7호
• /
• pp.614-622
• /
• 2004

A new approach for the automatic elimination of free edges in the finite element model for the analysis of sheet metal forming processes is presented. In general, the raw finite element model constructed from an automatic mesh generator is not well suited for the direct use in the downstream forming analysis due to the many free edges which requires tedious time consuming interactive graphic operations of the users. In the present study, a general method for the automatic elimination of free edges is proposed by introducing a CAD/CAE hybrid method. In the method a trimmed parametric surface is generated to fill the holes which are orginated from the free edges by using the one step elastic finite element analysis. In addition, mesh generation algorithm is suggested which can be used in the general trimmed surface. In order to verify the validity of the proposed method, various examples including actual automobile sheet metal parts are given and discussed.

• 한국터널지하공간학회 논문집
• /
• 제10권4호
• /
• pp.313-327
• /
• 2008

화재 발생 시 지하구조물의 열-역학상호거동이 정확히 고려되지 못하고 있으며, 이로 인해 일반적인 열전달 이론에 근거한 수치해석 시 화재로 인한 구조물의 손상정도가 과소 평가될 수 있는 문제점이 있다. 따라서 본 연구에서는 화재 발생 시 지하구조물의 열-역학 상호거동을 모사하기 위한 유한요소 기반의 수치모델을 새롭게 개발하였다. 특히, 화재로 인한 구조물의 단면 손실을 모사하기 위한 요소제거모델을 제안하였고 대류 경계조건을 적용하였다. 이때 요소 내의 최대 온도가 해석 시에 설정한 임계온도 이상이 되면 요소가 제거되도록 설정하였다. 모형 화재시험 결과와 해석 결과를 비교한 변수해석을 통하여, RABT와 RWS 화재 시나리오 조건에 대한 최적의 임계온도, 요소크기, 온도에 따른 대류열전달계수 조건 등을 제시하였다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 춘계학술발표회 논문집
• /
• pp.13-23
• /
• 2008

• Composites Research
• /
• 제28권2호
• /
• pp.58-64
• /
• 2015

본 논문에서는 샌드위치 복합재 패널로 제작되는 사용후 핵연료 수송용기 충격완충체의 유효등가 유한 요소모델을 제시하는데 목적을 둔다. 샌드위치 복합재 패널은 금속재 면재와 각각 우레탄 폼, 발사목 그리고 레드우드 심재로 구성되었다. 충격완충체의 유효등가 유한요소 모델은 샌드위치 복합재 패널의 저속충격 시험과 해석결과와의 비교를 통해 제시되었으며, LS-DYNA 3D를 사용한 동적 외연 유한요소해석에 의해 수행되었다. 시험과 해석 결과, 충격완충체 샌드위치 패널의 유한요소 모델은 적층쉘 요소의 면재와 솔리드요소의 심재를 사용한 기존의 혼합모델링 기법에 비해 면재와 심재 모두 솔리드 요소를 적용하는 방법이 더 정확한 결과를 나타냄을 확인하였다. 이때 발사목과 레드우드 심재는 요소제거 기능을 갖는 솔리드 요소로 모델링 되는 것이 추천되어진다.

• Structural Engineering and Mechanics
• /
• 제2권4호
• /
• pp.313-326
• /
• 1994

Some structures under the action of some specific loads can be treated as consisting of rigid and deformable parts. The paper presents a way to include rigid elements into a finite element model accounting for geometrical and material nonlinearities. Lagrange multipliers technique is used to derive equations of motion for the coupled deformable-rigid system. Solution algorithm based on the elimination of the Lagrangian multipliers and dependent kinematic unknowns at the element level is described. A follow-up paper(Rojek and Kleiber 1993) complements the discussion by giving details of the computer implementation and presenting some realistic test examples.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.580-587
• /
• 1998

For many decades, the railway was constructed using tracks with jointed rails of relatively short lengths in accordance with rolling and handling technology. The joints cause many drawbacks in the track and lead to significant maintenance cost. So, railroad engineers became interested in eliminating joints to increase service loads and speeds by improving rolling, welding, and fastening technology, Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. But in the case of the elimination of rail joints, it may cause the track to be suddenly buckled laterally by thermal and vehicle loads. Thermal loads are caused by an increase in the temperature of railway track. In this paper, CWR track model and CWRB program are developed for linear buckling analysis using finite element method(FEM). The finite element discretization is used with a total of 14 degrees of freedom for each rail element. The stiffness of the fastener, tie, and ballast bed are included by a set of spring elements. The investigation on the buckling modes and temperature of CWR track is presented in the paper.

• 한국터널지하공간학회 논문집
• /
• 제12권3호
• /
• pp.223-237
• /
• 2010

본 연구에서는 화재에 의한 콘크리트의 단면손실과 역학적 특성을 저하하는 주요 요인 가운데 온도증가율, 즉 초기가열구배를 변화시키면서 모의화재실험을 수행하였다. 그리고 수행된 모의화재실험에서 관찰된 단면손실을 모사하기 위하여 요소제거모델을 활용한 유한요소해석법에 의해 열전달해석을 수행하였다. 이때 모의화재실험결과와 수치해석결과가 가장 일치하는 대류열전달계수를 반복적인 해석과정을 통해 도출하였다 이상의 과정으로부터 얻어진 초기가열구배에 따른 대류열전달계수의 변화를 조사한 결과, 각 초기가열구배별 대류열전달계수의 변화는 분수함수 형태로 근사시킬 수 있었다. 최종적으로 모의화재실험으로부터 도출된 초기가열구배별 대류열전달계수의 변화 결과를 내삽하여 다양한 초기가열구배에 따른 화재경과시간별 대류열전달계수의 변화를 추정할 수 있는 수식을 함께 제시하였다.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.811-824
• /
• 2022

Despite its disadvantages, soft story can reduce the damage to the upper floors by concentrating drift in that specific story provided that large drifts are avoided. Gapped-Inclined Brace (GIB) with reduced P-delta effects and the control of soft story stiffness makes it possible to take advantage of the soft story in buildings and increase their capacity for energy dissipation. OpenSees software is used in this study to validate and modify the GIB model's shortcomings. Also, the analysis method for this element is changed for design. The modified element is evaluated in 3D analysis. Finally, to retrofit an existing building, this element is used. Based on the Iranian seismic code, a six-story reinforced concrete building is modelled and studied with 3D analysis. In this building, the construction shortcomings and elimination of infills on the ground floor cause the formation of a soft story. Results of nonlinear static analysis, nonlinear dynamic, and incremental dynamic analysis using both components of seismic acceleration applied to the structure at different angles and the fragility curves indicate the improvement of the retrofitted structure's performance using the modified element to reach the required performance level following the retrofit code.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.749-758
• /
• 2018

This article derived a hybrid coupling technique using the higher-order displacement polynomial and three soft computing techniques (teaching learning-based optimization, particle swarm optimization, and artificial bee colony) to predict the optimal stacking sequence of the layered structure and the corresponding frequency values. The higher-order displacement kinematics is adopted for the mathematical model derivation considering the necessary stress and stain continuity and the elimination of shear correction factor. A nine noded isoparametric Lagrangian element (eighty-one degrees of freedom at each node) is engaged for the discretisation and the desired model equation derived via the classical Hamilton's principle. Subsequently, three soft computing techniques are employed to predict the maximum natural frequency values corresponding to their optimum layer sequences via a suitable home-made computer code. The finite element convergence rate including the optimal solution stability is established through the iterative solutions. Further, the predicted optimal stacking sequence including the accuracy of the frequency values are verified with adequate comparison studies. Lastly, the derived hybrid models are explored further to by solving different numerical examples for the combined structural parameters (length to width ratio, length to thickness ratio and orthotropicity on frequency and layer-sequence) and the implicit behavior discuss in details.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.433-440
• /
• 1998

For many decades, railroad technology was used to set up tracks with jointed rails and lengths in accordance with rolling and handling technology. The joints lead to drawbacks in the track and in controlling rising maintenance costs. So, railroad engineers became interested in eliminating joints to increase loads, speeds and improvements in rolling, welding, and fastening technology. Continuous welded rail(CWR) track has many advantages over the conventional jointed-rail track. In the case of the elimination of rail joints, it may cause the track to be suddenly and laterally buckled by thermal forces and vehicle load. Thermal forces are caused by an increase in the temperature of railway track. For many years, many analytical and experimental investigations have been conducted to improve the safety of CWR track by various research center in many country. In this paper, CWR track model and CWRB program is developed for buckling analysis using finite element method(FEM). The finite element discretization is used for a rail element with a total of 14 degrees of freedom. The stiffness of the fasteners, tie, and ballast bed is included by a set of spring elements. The investigation on the buckling modes and temperature of CWR track is presented in this paper