• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.671-678
• /
• 2001

All solid-state thin film micro supercapacitor, which consists of $RuO_2$/LiPON/$RuO_2$ multi layer structure, was fabricated on Pt/Ti/Si substrate using a $RuO_2$ electrode. Bottom $RuO_2$ electrode was grown by dc reactive sputtering system with increasing $O_2/[Ar+O_2]$ ratio at room temperature, and a LiPON electrolyte film was subsequently deposited on the bottom $RuO_2$ electrode at pure nitrogen ambient by rf reactive sputtering system. Room temperature charge-discharge measurements based on a symmetric $RuO_2$/LiPON/$RuO_2$ structure clearly demonstrates the cyclibility dependence on the microstructure of the $RuO_2$ electrode. Using both glancing angle x-ray diffraction (GXRD) and transmission electron microscopy (TEM) analysis, it was found that the microstructure of the $RuO_2$ electrode was dependent on the oxygen flow ratio. In addition, x- ray photoelectron spectroscopy(XPS) examination shows that the Ru-O binding energy is affected by increasing oxygen flow ratio. Furthermore, TEM and AES depth profile analysis after cycling demonstrates that the interface layer formed by interfacial reaction between LiPON and $RuO_2$ act as a main factor in the degradation of the cyclibility of the thin film micro-supercapacitor.

• The Journal of Society for e-Business Studies
• /
• v.20 no.2
• /
• pp.27-36
• /
• 2015

Current leakage of industrial technologies with revealing state secret against nation is gradually increasing and scope of the spill is diversified from technology-oriented leakage to new economic security sector like information and communication, electrical and electronic, defense industry, illegal export of strategic material, economic order disturbance by foreign country, infringement of intellectual property, etc. So the spill damage can affect not only leaked company but also national interests and entire domestic industry. According to statistics from National Industrial Security Center of National Intelligence Service, a major cause of technology leakage is not only by external things about hacking and malignant code, but internal leakage of former and current employees account for about 80%. And technology leakage due to temptation of money and personal interests followed by technology leakage of subcontractor is steadily increased. Most studies in the field of security have tended to focus on measuring security capability of company in order to prevent leakage core assets or developing measurement Indicators for management rather than security activities of the company members that is most important. Therefore, this study analyzes the effect of most underlying security education in security activities on security capabilities of enterprise. As a result, it indicates that security education have a positive(+) correlation with security capabilities.

• Journal of the Korean Magnetics Society
• /
• v.20 no.5
• /
• pp.173-177
• /
• 2010

The electronic structure of charge-density-wave (CDW) system $CeTe_2$ has been investigated by using angle-resolved photoemission spectroscopy (ARPES). The clearly dispersive band structures are observed in the measured ARPES spectra, indicating the good quality of the single-crystalline sample employed in this study. The four-fold symmetric patterns are observed in the constant energy (CE) mappings, indicating the $2{\times}2$ lattice deformation in the Te(1) sheets. The observed CE images are similar to those of $LaTe_2$, suggesting that Ce 4f states have the minor contribution to the CDW formation in $CeTe_2$. This study reveals that the carriers near the Fermi level should have mainly the Te(1) 5p and Ce 5d character, that the Te(1) 5p bands contribute to the CDW formation, and that the Ce 5d bands cross the Fermi level even in the CDW state.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.102-108
• /
• 2013

In manufacturing of solution-processed organic electronic devices, a spin coating method is frequently used, but which has a big problem. Solvent in a solution has a decisive effect such as physical and chemical damage for successive solution-based film deposition. Such a severe damage by solvent restricts for fabricating building blocks of multi-layered films from solutions. In this work, it will be shown that a proper combination of well-known solvents gives a chance to fabricate multi-layered film, also this new method was applied to make organic field effect transistor. Two types of bottom gate, bottom contact transistors were fabricated, one of which is fabricated by conventional single spin coating method, the other fabricated by double spin coating method. Compared with the electrical characteristics in a single spin coated transistor, the leakage current between source and gate electrode was decreased, ON state current was increased, and the extracted saturation mobility was multiplied more than 2.7 time for double spin coated transistors. It is suggested that the multiple coated gate dielectric structure is more desirable for high performance organic ferroelectric field effect transistors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2018

In this paper, we present a robust beamforming design to tackle the weighted sum-rate maximization (WSRM) problem in a multicell multiple-input multiple-output (MIMO) - non-orthogonal multipleaccess (NOMA) downlink system for 5G wireless communications. This work consider the imperfectchannel state information (CSI) at the base station (BS) by adding uncertainties to channel estimation matrices as the worst-case model i.e., singular value uncertainty model (SVUM). With this observation, the WSRM problem is formulated subject to the transmit power constraints at the BS. The objective problem is known as on-deterministic polynomial (NP) problem which is difficult to solve. We propose an robust beam forming design which establishes on majorization minimization (MM) technique to find the optimal transmit beam forming matrix, as well as efficiently solve the objective problem. In addition, we also propose a joint user clustering and power allocation (JUCPA) algorithm in which the best user pair is selected as a cluster to attain a higher sum-rate. Extensive numerical results are provided to show that the proposed robust beamforming design together with the proposed JUCPA algorithm significantly increases the performance in term of sum-rate as compared with the existing NOMA schemes and the conventional orthogonal multiple access (OMA) scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.209-218
• /
• 2012

Recently, the Field Programmable Stateful Logic Array (FPSLA) was proposed as one of the most promising system integration technologies which will extend the life of the Moore's law. This work is the first proposal of the FPSLA design automation flow, and the approaches to logic synthesis, synchronization, physical mapping, and automatic placement of the FPSLA designs. The synchronization at each gate for pipelining determines the x-coordinates of cells, and reduces the placement to 1-dimensional problems. The objective function and its gradients for the non-linear optimization of the net length and placement density have been remodeled for the reduced global placement problem. Also, a recursive algorithm has been proposed to legalize the placement by relaxing the density overflow of bipartite bin groups in a top-down hierarchical fashion. The proposed model and algorithm are implemented, and validated by applying them to the ACM/SIGDA benchmark designs. The output state of a gate in an FPSLA needs to be duplicated so that each fanout gate can be connected to a dedicated copy. This property has been taken into account by merging the duplicated nets into a hyperedge, and then, splitting the hyperedge into edges as the optimization progresses. This yields additional 18.4% of the cell count reduction in the most dense logic stage. The practicality of the FPSLA can be further enhanced primarily by incorporating into the logic synthesis the constraint to avoid the concentrated fains of gates on some logic stages. In addition, an efficient algorithm needs to be devised for the routing problem which is based on a complicated graph. The graph models the nanowire crossbar which is trimmed to be embedded into the FPSLA fabric, and therefore, asymmetric. These CAD tools can be used to evaluate the fabric efficiency during the architecture enhancement as well as automate the design.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.96-106
• /
• 2014

Previous academic research on FPGA tools has relied on simple imaginary models for the targeting architecture. As the first step to overcome such restriction, the issues on analytic placement and legalization which are applied to commercial FPGAs have been brought up, and several techniques to remedy them are presented, and evaluated. First of all, the center of gravity of the placed cells may be far displaced from the center of the chip during analytic placement. A function is proposed to be added to the objective function for minimizing this displacement. And then, the density map is expanded into multiple layers to accurately calculate the density distribution for each of the cell types. Early fixation is also proposed for the memory blocks which can be placed at limited sites in small numbers. Since two flip-flops share control pins in a slice, a compatibility constraint is introduced during legalization. Pre-packing compatible flip-flops is proposed as a proactive step. The proposed techniques are implemented on the K-FPGA fabric evaluation framework in which commercial architectures can be precisely modeled, and modified for enhancement, and validated on twelve industrial strength examples. The placement results show that the proposed techniques have reduced the wire length by 22%, and the slice usage by 5% on average. This research is expected to be a development basis of the optimization CAD tools for new as well as the state-of-the-art FPGA architectures.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1221-1233
• /
• 2016

Purpose: To investigate any potential association between wine and breast cancer risk. Materials and Methods: We quantitatively assessed associations by conducting a meta-analysis based on evidence from observational studies. In May 2014, we performed electronic searches in PubMed, EmBase and the Cochrane Library to identify studies examining the effect of wine drinking on breast cancer incidence. The relative risk (RR) or odds ratio (OR) were used to measure any such association. Results: The analysis was further stratified by confounding factors that could influence the results. A total of twenty-six studies (eight case-control and eighteen cohort studies) involving 21,149 cases were included in our meta-analysis. Our study demonstrated that wine drinking was associated with breast cancer risk. A 36% increase in breast cancer risk was observed across overall studies based on the highest versus lowest model, with a combined RR of 1.0059 (95%CI 0.97-1.05) in dose-response analysis. However, 5 g/d ethanol from wine seemed to have protective value from our non-linear model. Conclusions: Our findings indicate that wine drinking is associated with breast cancer risk in a dose-dependent manner. High consumption of wine contributes to breast cancer risk with protection exerted by low doses. Further investigations are needed for clarification.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.5
• /
• pp.1047-1059
• /
• 2015

This study will predict risk factors associated with cigarettes in Korea by analyzing the social big data collected from the internet such as blogs, cafes, and SNSes in Korea, using data mining techniques. The key analysis results are as follows. First, when "raising cigarette price"is mentioned online, the negative group (i.e., the proportion of people holding negative views about smoking) increased from 58.6% to 74.8%, and when "lung cancer" is mentioned, it increased to 73.1%. Second, with regard to cigarettes in general, the positive group (i.e., the proportion of people holding positive views about smoking) decreased by 5.6% after the raising of cigarette prices, while the negative group increased by 6.1%. Third, when policies related to "FCTC, raising cigarette price, non-smoking laws, smoking regulations, non-smoking ads, and nonsmoking business" are more frequently mentioned online, the positive group tended to decrease. Finally, when "non-smoking drugs, non-smoking patches, and non-smoking gums" are more frequently mentioned online, the positive group tended to decrease. However, when "electronic cigarettes and supplements" are more frequently mentioned online, the positive group increased.