• 제목/요약/키워드: electronic scale

검색결과 1,214건 처리시간 0.029초

열교환기에 대한 스케일 완화장치의 성능평가 (Performance Evaluation of Scale Mitigation Unit for Heat Exchangers)

  • 모정하;신상철;김경우
    • 대한기계학회논문집B
    • /
    • 제25권9호
    • /
    • pp.1149-1156
    • /
    • 2001
  • The objective of the present study is to investigate the performance of electronic scale mitigation unit(ESMU), which reduces the amount of scale in a heat exchanger. The circular tube with diameter of 19mm and plate-and-frame heat exchangers with 20 thermal plates were used for the tests. In order to accelerate the rate of scale in a laboratory test, artificial hard water of 1000ppm(as CaCO$_3$) was recirculated at a flow rate of 5 lpm, 7 lpm, and 9 lpm throughout the tests. The effect of ESMU on the scale thickness and overall heat transfer coefficients was examined. The test results showed that the ESMU could reduce the scale deposits even in the acceleated test.

Male-Silkmoth-Inspired Routing Algorithm for Large-Scale Wireless Mesh Networks

  • Nugroho, Dwi Agung;Prasetiadi, Agi;Kim, Dong-Seong
    • Journal of Communications and Networks
    • /
    • 제17권4호
    • /
    • pp.384-393
    • /
    • 2015
  • This paper proposes an insect behavior-inspired routing algorithm for large-scale wireless mesh networks. The proposed algorithm is adapted from the behavior of an insect called Bombyx mori, a male silkmoth. Its unique behavior is its flying technique to find the source of pheromones. The algorithm consists of two steps: the shortest-path algorithm and the zigzag-path algorithm. First, the shortest-path algorithm is employed to transmit data. After half of the total hops, the zigzag-path algorithm, which is based on the movement of the male B. mori, is applied. In order to adapt the biological behavior to large-scale wireless mesh networks, we use a mesh topology for implementing the algorithm. Simulation results show that the total energy used and the decision time for routing of the proposed algorithm are improved under certain conditions.

바이폴라 공정을 이용한 압력센서용 출력전압 보상회로의 설계 (A Design of Output Voltage Compensation Circuits for Bipolar Integrated Pressure Sensor)

  • 이보나;김건년;박효덕
    • 센서학회지
    • /
    • 제7권5호
    • /
    • pp.300-305
    • /
    • 1998
  • 본 논문에서는 옵셋전압 및 full scale 출력전압, 옵셋전압 및 full scale 출력전압의 온도특성이 보상된 집적화 된 실리콘 압력센서를 설계하였다. 신호처리회로는 옵셋전압 및 full scale 출력전압을 원하는 값으로 조정할 수 있고 옵셋전압의 온도 드리프트를 최소화할 수 있으며 출력전압이 양의 온도계수를 갖도록 하여 압저항계수의 온도계수와 상쇄되도록 설계하였다. 설계한 신호처리회로는 바이폴라 공정 파라미터를 이용하여 SPICE로 시뮬레이션하였다. 옵셋전압 및 full scale 출력전압의 조정을 위하여 온도계수가 서로 다른 이온주입저항을 이용하였다. 시뮬레이션결과 옵셋전압 및 옵셋전압의 온도계수 조정저항을 이용하여 옵셋전압을 0.133V로 조정하였고 온도 드리프트는 $42\;ppm/^{\circ}C$로 감소시킬 수 있었다. full scale 출력전압 조정저항을 이용하여 full scale 출력전압값을 4.65V로 조정하였고 온도보상을 통해 출력전압의 온도계수를 $40\;ppm/^{\circ}C$로 감소시킬 수 있었다.

  • PDF

대칭형 무접합 이중게이트 MOSFET에서 스케일 길이를 이용한 문턱전압 이하 스윙 모델 (Subthreshold Swing Model Using Scale Length for Symmetric Junctionless Double Gate MOSFET)

  • 정학기
    • 한국전기전자재료학회논문지
    • /
    • 제34권2호
    • /
    • pp.142-147
    • /
    • 2021
  • We present a subthreshold swing model for a symmetric junctionless double gate MOSFET. The scale length λ1 required to obtain the potential distribution using the Poisson's equation is a criterion for analyzing the short channel effect by an analytical model. In general, if the channel length Lg satisfies Lg > 1.5λ1, it is known that the analytical model can be sufficiently used to analyze short channel effects. The scale length varies depending on the channel and oxide thickness as well as the dielectric constant of the channel and the oxide film. In this paper, we obtain the scale length for a constant permittivity (silicon and silicon dioxide), and derive the relationship between the scale length and the channel length satisfying the error range within 5%, compared with a numerical method. As a result, when the thickness of the oxide film is reduced to 1 nm, even in the case of Lg < λ1, the analytical subthreshold swing model proposed in this paper is observed to satisfy the error range of 5%. However, if the oxide thickness is increased to 3 nm and the channel thickness decreased to 6 nm, the analytical model can be used only for the channel length of Lg > 1.8λ1.

한전의 배전자동화 (Distribution Automation System in KEPCO)

  • 장영주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.7-10
    • /
    • 2001
  • Distribution Automation System (DAS) has been designed and implemented for feeder automation using the Paircable, Optical-Fiber, Wireless, TRS as a communication media. KEPCO has been constructed DAS since 1984. We have two types of DAS. one is large-scale DAS for major city in korea, the other is small-scale DAS (or the rest of major city. we are plan to finish small-scale DAS by end of 2001.

  • PDF

Multi-spectral Vehicle Detection based on Convolutional Neural Network

  • Choi, Sungil;Kim, Seungryong;Park, Kihong;Sohn, Kwanghoon
    • 한국멀티미디어학회논문지
    • /
    • 제19권12호
    • /
    • pp.1909-1918
    • /
    • 2016
  • This paper presents a unified framework for joint Convolutional Neural Network (CNN) based vehicle detection by leveraging multi-spectral image pairs. With the observation that under challenging environments such as night vision and limited light source, vehicle detection in a single color image can be more tractable by using additional far-infrared (FIR) image, we design joint CNN architecture for both RGB and FIR image pairs. We assume that a score map from joint CNN applied to overall image can be considered as confidence of vehicle existence. To deal with various scale ratios of vehicle candidates, multi-scale images are first generated scaling an image according to possible scale ratio of vehicles. The vehicle candidates are then detected on local maximal on each score maps. The generation of overlapped candidates is prevented with non-maximal suppression on multi-scale score maps. The experimental results show that our framework have superior performance than conventional methods with a joint framework of multi-spectral image pairs reducing false positive generated by conventional vehicle detection framework using only single color image.

시각장애인을 위한 공간 및 방향감각 보조시스템 (Spatial and Directional Sensation Prosthesis for the Blind)

  • 노세현;박우찬;신현철;김상호;김영곤;김광년;정동근
    • 대한의용생체공학회:의공학회지
    • /
    • 제25권2호
    • /
    • pp.145-150
    • /
    • 2004
  • 시각장애인의 시각보조를 위하여 공간 및 방향감각 보조시스템으로 초음파거리계 및 전자나침반을 개발하였다. 초음파거리계는 40 KHz 초음파의 반사를 이용하여 장애물까지 거리 정보를 거리에 비례하는 시간간격의 가청음 자극을 제공하며, 전자나침반은 자기저항브리지를 이용하여 지구자기장을 검출하고 자북 방향 정보를 이마주위의 진동모터를 통하여 촉각자극을 제공하도록 설계하였다. 초음파저리계의 측정범위는 0.065-3.26미터이며 전자나침반의 방향 분해능은 22.5도이다. 그리고 초음파거리계와 전자나침반을 통합한 일체형 시각보조시스템을 구현하였으며 이때 거리정보는 두부에서 진동모터의 위치로 전달하도록 하였다. 본 연구의 목표는 시각장애인의 공간 및 방향감각을 위한 실용적인 보조시스템을 구현하는 것이며, 본 보조시스템을 반복 사용함에 따라 시각장애인의 공간 및 방향감각 기능이 향상될 것으로 추측된다.

A System Dynamics Approach to the Electronic Commerce and Its Implication

  • Jaeho Juhn;Kim, Doa-Hoon
    • 한국시스템다이내믹스학회:학술대회논문집
    • /
    • 한국시스템다이내믹스학회 2000년도 학술대회발표논문집
    • /
    • pp.29-37
    • /
    • 2000
  • In this paper an attempt is made to understand contribution factors in the field of electronic commerce(EC). To do that, we adopt and modify an existing commerce model. The following two major conclusions are drawn from our simulation. Most of all, the diminution of information delay introduce monotonous growth rather than fluctuation of EC market. The stable increase of revenue or market scale makes us decide the employment or capacity scale quickly. Second, for favorable and continuous evolution of EC, utilization system of electronic money should be established steadily. The following findings strongly support our claim: We found full oscillation of EC market when electronic money system didn't established well. On the contrary, if electronic money system could provide fast cash flow and fully trustful function, decisions of company or consumer would be executed promptly.

  • PDF

밀 스케일을 활용한 Sr-페라이트 소결자석의 연구 (Study on the Sr-ferrite sintered magnets using mill scale)

  • 조태식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.82-85
    • /
    • 2002
  • High-quality Sr-ferrite sintered magnets have been studied by using mill scale added SrCO$_3$ and oxidents before oxidation process. The pre-added SrCO$_3$ powders were improved the degree of oxidation and crush of mill scale and the magnetic properties of Sr-ferrite sintered magnets. The small added NaNO$_3$ oxidant was also highly improved the degree of oxidation and crush of mill scale and the magnetic properties of Sr-ferrite sintered magnets; 3805 G of remanent flux density, 3240 Oe of intrinsic coercivity, and 3.45 MGOe of maximum energy product.

  • PDF