• Journal of Information Display
• /
• 제6권4호
• /
• pp.26-34
• /
• 2005

In this paper, a new rectification scheme to transform the uncalibrated stereo image pair into the calibrated one is suggested and its performance is analyzed by applying this scheme to the reconstruction of the intermediate views for multi-view stereoscopic display. In the proposed method, feature points are extracted from the stereo image pair by detecting the comers and similarities between each pixel of the stereo image pair. These detected feature points, are then used to extract moving vectors between the stereo image pair and the epipolar line. Finally, the input stereo image pair is rectified by matching the extracted epipolar line between the stereo image pair in the horizontal direction. Based on some experiments done on the synthesis of the intermediate views by using the calibrated stereo image pairs through the proposed rectification algorithm and the uncalibrated ones for three kinds of stereo image pairs; 'Man', 'Face' and 'Car', it is found that PSNRs of the intermediate views reconstructed from the calibrated images improved by about 2.5${\sim}$3.26 dB than those of the uncalibrated ones.

• 한국전자파학회논문지
• /
• 제27권9호
• /
• pp.844-853
• /
• 2016

컴퓨터의 대표적인 출력 매체인 LCD(Liquid Crystal Display) 모니터에서는 일반적으로 의도치 않은 전자파가 누설된다. 이러한 누설 전자파에는 컴퓨터의 메인 보드에서 LCD 모니터로 전달되는 화면 정보가 포함되어 있기 때문에 누설 신호의 복원을 통한 화면 정보 누설의 위험성이 존재한다. 따라서 누설 신호를 통한 전자파 보안 위협이 이슈가 되고 있으므로 정보 누설 가능성에 대한 분석이 필요한 상황이다. 본 논문에서는 데스크탑과 랩탑 모니터에서 누설되는 전자파를 분석하여 화면 정보 누설의 가능성을 확인하였다. 화면 구성 매커니즘을 분석하여 LCD 모니터의 누설 전자파의 형태를 예측하였고, 누설 신호 탐지 실험 환경을 구성하여 원거리에서 누설 전자파를 측정하였다. 또한, 여러 알고리즘을 사용하여 누설 화면을 복원하고, 원 화면과 비교하여 정보 누설 위협에 대하여 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1661-1663
• /
• 2007

The contrast of display is one of the important specifications. Even if the contrast indicates luminance range which is a capability of the display and is greater in lower luminance or higher luminance, we consider that the greater contrast gets not the better performance. It is not the same value in human visual system. In practice, it is difficult to achieve the full dynamic range seen by human beings using electronic equipment. Therefore, we consider ambient condition and human perception to calculate perceptual contrast using the CIECAM02. In this paper, we propose perceptual contrast that is calculated using the brightness of CIECAM02.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.116-120
• /
• 2020

In this paper, we developed an electrochemical glucose sensor strip using a paper substrate. The paper glucose sensor strip is eco-friendly because it uses paper as a substrate, and it has the advantage that it can be manufactured only with four printing, drying and cutting processes. The paper glucose sensor is significantly simplified by the production process than the conventional glucose sensors because the production of only four printing on the paper substrate. In this paper, eco-friendly tracing paper was used to develop a paper glucose sensor strip, and screen-printing technology was used to form a carbon/silver electrode, insulating layer and glucose oxidase(GOD) layer. The developed paper glucose sensor strip has a flat structure with a size of 30 × 4.6 ㎟, and blood injection is a type of direct contact with the exposed enzyme layer above the strip. In this paper, the performance of paper glucose sensor strips was evaluated by analyzing the cyclic voltammetry(CV) and chronoamperometry(CA) characteristics.

• 한국전자통신학회논문지
• /
• 제10권5호
• /
• pp.587-592
• /
• 2015

LED의 사용이 증가됨에 따라, LED 디스플레이의 저전력 설계에 대한 요구가 증가하고 있다. 본 논문에서는 디지털 신호로 제어하는 정전류원 회로에 단열회로 동작을 유도하는 전원소스 공급을 통하여, 저전력화가 가능한 LED 컨트롤러부를 설계하였다. 설계한 회로는 0.35um CMOS Process로 구현하였으며 회로의 선형 동작을 확인하였다. 시뮬레이션 결과 기존의 LED 컨트롤러부에 대비하여 약 82% 소비전력 절감효과를 확인하였다. 본 연구는 LED 디스플레이 동작의 발열 대책 및 저전력화에 유용할 것으로 기대된다.

• Transactions on Electrical and Electronic Materials
• /
• 제3권2호
• /
• pp.32-37
• /
• 2002

This paper gives the basic mechanical properties of indium-tin-oxide (ITO) films on polymer substrates which are exposed to externally and thermally induced bending force. By using modified Storney formula including triple layer structure and bulge test measuring the conductive changes of patterned ITO islands as a function of bending curvature, the mechanical stability of ITO films on polymer substrates was intensively investigated. The numerical analyses and experimental results show thermally and externally induced mechanical stresses in the films are responsible for the difference of thermal expansion between the ITO film and the substrate, and leer substrate material and its thickness, respectively. Therefore, a gradually ramped heating process and an organic buffer layer were employed to improve the mechanical stability, and then, the effects of the buffer layer were also quantified in terms of conductivity-strain variations. As a result, it is uncovered that a buffer layer is also a critical factor determining the magnitude of mechanical stress and the layer with the Young's modulus lower than a specific value can contribute to relieving the mechanical stress of the films.

• 전자공학회논문지 IE
• /
• 제46권3호
• /
• pp.12-18
• /
• 2009

본 논문은 LED 디스플레이 시스템에서 균일하고 부드러운 영상표출을 위하여 각각의 Red, Green, Blue LED의 휘도를 조절하여 흰색보정을 유지할 수 있는 프로세서를 설계하였다. 이 프로세서는 일반적인 LED소자의 특성곡선을 근거로 "a"를 고유특성 값, "b"를 사용시간에 따른 휘도보정 값, "X"를 구동전류 값, "Y"를 휘도 값이라 할 때, "Y=aX+b"로 설정되는 휘도 특성함수에 의하여 각 픽셀의 휘도에 따른 구동 전류 값을 산출하여 휘도를 보정하고, 또한 장시간 사용 시 LED소자의 휘도 저하 문제를 해결하기 위하여 "b"값을 조절하여 LED 디스플레이 시스템의 전체 평균 휘도 값을 상향시킬 수 있도록 구현하였다.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.241-245
• /
• 2017

This paper proposes a private display that can adjust viewing angles by using an electric-field-driven (EFD) LC Lens. The EFD LC Lens design and simulation were analyzed by using the Extended Jones Matrix Method. The conventional method for attaching a private film to the display was difficult. In order to solve this problem, in this study, by using the EFD LC Lens, we devised a method that can view images more conveniently. We analyzed the luminance and illumination of the optical viewing distance by using the Extended Jones Matrix Method. We also measured the intensity of the viewing angles. The simulation attached the EFD LC Lens to the 14" Full HD RGB stripe wide panel. We calculated the relative luminance distribution and the luminance distribution on the viewing angle of the image at the optimum viewing distance of 60 cm, using the EFD LC Lens and the lenticular lens. The proposed method could be used to design private displays that can adjust the viewing angle of the EFD LC Lens.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.600-603
• /
• 2000

Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.114-115
• /
• 2007

In this paper, it was demonstrated that organic thin-film transistors (OTFTs) were fabricated with the organic passivation layer by vapor deposition polymerization (VDP) processing, In order to form polymeric film as an passivation layer, VDP process was also introduced instead of spin-coating process, where polymeric film was co-deposited by high-vacuum thermal evaporation from 6FDA and ODA followed by curing, Field effect mobility, threshold voltage, and on-off current ratio with 450-nm-thick organic passivation layer were about $0.21\;cm^2/Vs$, IV, and $1\;{\times}\;10^5$, respectively.