• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.309-316
• /
• 2019

In this paper, a low-jitter delay-locked loop that compensates for local clock skew is presented. The proposed DLL consists of a phase splitter, a phase detector(PD), a charge pump, a bias generator, a voltage-controlled delay line(VCDL), and a level converter. The VCDL uses self-biased delay cells using current mode logic(CML) to have insensitive characteristics to temperature and supply noises. The phase splitter generates two reference clocks which are used as the differential inputs of the VCDL. The PD uses the only single clock from the phase splitter because the PD in the proposed circuit uses CMOS logic that consumes less power compared to CML. Therefore, the output of the VCDL is also converted to the rail-to-rail signal by the level converter for the PD as well as the local clock distribution circuit. The proposed circuit has been designed with a $0.13-{\mu}m$ CMOS process. A global CLK with a frequency of 1-GHz is externally applied to the circuit. As a result, after about 19 cycles, the proposed DLL is locked at a point that the control voltage is 597.83mV with the jitter of 1.05ps.

• Korean Journal of Human Ecology
• /
• v.16 no.6
• /
• pp.1197-1209
• /
• 2007

The advance of digital contents industry shifts the focus of consumptions; from analogue to digital ones. It gives significant impact on individual life as well as overall society and culture, and it leads to the increased consumption of digital contents. Nevertheless, current digital contents industry fails to secure the sufficient consumer protection systems including relevant rules and laws which regulate the distribution, use, and other transaction activities of digital contents and the efforts, on the part of contents providers, to provide information to consumers and to protect them. Digital contents, by its nature, is different from the existing products so that its nature is likely to cause unique consumer problems totally different from the offline transactions and the electrical transactions of existing products. This study, therefore, aims to identify the possible problems which may be incurred by consumers in their use of digital contents, specify the types of consumer damages, and provide the underlying materials to improve the systems related to digital contents and take legally complementary measures for consumer protection. To identify the types of consumer damages, this study analyzed the results from consumer counselling cases, experts opinion survey, and FGI. For consumer damage cases, this study analyzed the consumer complaints received by open consumer counselling sites of the Korea Consumer Agency and Seoul Electronic Commerce Center. For experts opinion survey, it conducted questionnaire survey of the group of experts from digital contents manufacturers or providers, and those who treated consumer damages directly. For FGI analysis, it organized a panel of students and employees who had used digital contents to understand the types of consumer damages. The results of this study can be summed up as follows. Based on the results from consumer counselling cases, experts opinion survey, and FGI analysis, the consumer damages related to digital contents can be classified, in their nature, into economic or financial damages (25 cases), emotional or psychological ones (15 cases), time-related ones (7 cases), physical ones (4 cases), and privacy-related ones (i.e. leakage of personal data)(3 cases). More specifying the types of damages, damages can be subdivided into contract-, charge-, maintenance-, use-, individual-related ones and other ones. Among them, both contract- and charge-related damages appeared only in the economic or financial damages, whereas user-specific individual damages appeared only in physical and emotional or psychological ones. On the other hand, maintenance- and use-related damages and other ones were observed in both categories of economical or financial damages and time-related ones. Use- and privacy-related damages, in particular, caused emotional or psychological damages.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.693-695
• /
• 2012

This paper have presented the breakdown voltage for double gate(DG) MOSFET. The analytical solution of Poisson's equation and Fulop's breakdown condition have been used to analyze for breakdown voltage. The double gate(DG) MOSFET as the device to be able to use until nano scale has the adventage to reduce the short channel effects. But we need the study for the breakdown voltage of DGMOSFET since the decrease of the breakdown voltage is unavoidable. To approximate with experimental values, we have used the Gaussian function as charge distribution for Poisson's equation, and the change of breakdown voltage has been observed for device geometry. Since this potential model has been verified in the previous papers, we have used this model to analyze the breakdown voltage. As a result to observe the breakdown voltage, the smaller channel length and the higher doping concentration become, the smaller the breakdown voltage becomes. Also we have observed the change od the breakdown voltage for gate oxide thickness and channel thickness.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.9-19
• /
• 2002

By using the thermionic emission model, the L-I-V(power-current-voltage) characteristics of a SCH(seperate confinement heterostructure) QW(quantum well) laser diode is analytically derived. We derived the relationships between the bulk carrier density of SCH regions and the confined carrier density of QW. The L-I-V characteristics is derived analytically by using current continuity equations. Solving the ambipolar diffusion equation under the condition of high level injection and charge neutrality, the current distribution in the SCH regions is considered. Results showed that the major factor affecting the laser I-V characteristics was the change of potential barrier at the cladding-SCH interface. Also the series resistance of a laser diode was decreased and the carrier injection was increased by increasing the forward flux of injection current from cladding to SCH region.

• Journal of Intelligence and Information Systems
• /
• v.12 no.3
• /
• pp.83-93
• /
• 2006

This paper is wireless location awareness technology using RFID. We investigates the Location of the received Signal strength reported by RF Analyses of the data are performed to understand the underlying features of location fingerprints. The system is performed factors the extreme environmental Emit signal, which consists of a unique 5000 Terminals. The Location Service have become very popular in many service industries, purchasing and distribution logistics, industry, manufacturing companies and a parking place. The Technically optimal Solution would be the storage of Intelligence information in the most common form of electronic data-carrying device in use in everyday life is the smart card based upon a contact field (telephone smart card, bank cards). The method of an indoor positioning experiment system is compared using measured Location data and a charge of service. The result of research showed the following: first, to check out the mechanism between benefit of system installation and operation of Active RFID. Second, it contributed on indoor wireless location intelligence system efficiency.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.229-233
• /
• 2006

We investigated the magnetic properties of Fe nanostripes by using the all electron full-potenial linearized augmented plane-wave (FLAPW) energy band method within the generalized gradient approximation (GGA). The magnetic moments of the Fe atoms in the edge Fe chains of the stripes composed of three, five, and seven chains have saturated values of 2.97 or 2.98 ${\mu}_B$, and the values of the center chains are 2.82 ${\mu}_B$ which is similar to that of 2D square lattice. The charge and spin density contour plots showed that the flat distribution in the edge region of the stripes, and it is due to the spilled out p-electrons from the atoms in the edge line. The calculated density of states for the edge atoms in the stripes with seven Fe chains showed that the narrowed width compared to that of center atoms due to the band narrowing effect at the edge.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.299-308
• /
• 2023

In this study, phosphorus (P)-doped nickel cobaltite (P-NiCo₂O₄) and nickel-cobalt layered double hydroxide (P-NiCo-LDH) were synthesized on nickel (Ni) foam as a conductive support using hydrothermal synthesis. The thermal properties, crystal structure, microscopic surface morphology, chemical distribution, electronic state of the constituent elements on the sample surface, and electrical properties of the synthesized P-NiCo₂O₄ and P-NiCo-LDH samples were analyzed using thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The P-NiCo₂O₄ electrode exhibited a specific capacitance of 1,129 Fg^-1 at a current density of 1 Ag^-1, while the P-NiCo-LDH electrode displayed a specific capacitance of 1,012 Fg^-1 at a current density of 1 Ag-1. When assessing capacity changes for 3,000 cycles, the P-NiCo₂O₄ electrode exhibited a capacity retention rate of 54%, whereas the P-NiCo-LDH electrode showed a capacity retention rate of 57%.