• 한국표면공학회지
• /
• 제38권1호
• /
• pp.7-13
• /
• 2005

Bismuth thin films were prepared on glass substrate with RF magnetron sputtering and effects of substrate temperature on surface morphology and their electrical transport properties were investigated. Grain growth of bismuth after nucleation and the onset of coalescense of grains at 393 K were observed with field emission secondary electron microscopy. Continuous thin films could not be obtained above 473 K because of grain segregation and island formation. Hall effect measurements showed that substrate heating yields the decrease of carrier density and the increase of mobility. Resistivity of bismuth film has its minimum (about 0.7 x 10/sup -3/ Ωcm) in range of 403～433 K. Annealing of bismuth films deposited at room temperature was carried out in a radiation furnace with flowing hydrogen gas. The change of resistivity was not significant due to cancellation of the decrease of carrier density and the increase of mobility. The abrupt change of electrical properties of film annealed above 523 K was found to be caused by partial oxidation of bismuth layer in x-ray diffraction analysis.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2267-2271
• /
• 2011

p-채널 박막트랜지스터에 이용할 수 있는 p-형 산화구리 박막반도체를 얻기 위한 연구를 하였다. 진공열증착방법으로 산화구리 박막을 성막하였으며, 증착 후 열처리 조건을 조절하여 박막트랜지스터의 활성층에 적용 가능한 특성을 가지는 산화구리 박막반도체를 얻었다. 열처리 전에 $10^{22}\;cm^{-3}$ 수준의 전자 이송자농도를 가지던 n-형 박막이 열처리 조건을 최적화함에 따라 $10^{16}\;cm^{-3}$ 수준의 정공 이송자농도를 가지는 p-형 산화물반도체 박막으로 변화하였다.

• 대한의생명과학회지
• /
• 제17권3호
• /
• pp.211-216
• /
• 2011

The chitosan-coated liposomes (chitosomes) were designed to improve the stability in the gastrointestinal (GI) tract and to enhance the efficacy for oral drug delivery of liposomes. The phosphatic acid (PA)-incorporated anionic liposomes were surface-coated with water soluble chitosan (WSC) by electro-ionic interaction. The shape of the chitosomes observed by transmission electron microscopy (TEM) was spherical in all the formulations and the coating layer by WSC could be founded through TEM images. The mean size and the zeta potential values of the chitosomes increased significantly with depending on the content of WSC added for coating the liposomes. The stability of the chitosomes in the GI tract was confirmed through the change of relative turbidity of the liposomal suspension. The plain liposomes (plasomes) suspension without adding WSC clearly showed the change of relatively turbidity in simulated gastric fluid (SGF), while the change degree of turbidity of the chitosomes in the SGF decreased as increasing of WSC content added for coating liposome. In the 5-CF release study from the plasomes and chitosomes, the plasomes released >90% of the initial 5-CF content at 4 h of release measurement. In contrast, the chitosomes released below 40% of initial content of 5-CF. In conclusion, these results indicate that the chitosomes can be used as a potential carrier for effective oral drug delivery.

• Journal of Pharmaceutical Investigation
• /
• 제20권1호
• /
• pp.13-18
• /
• 1990

Hydrocortisone (HC) sustained-release suppositories were prepared by using a solid matrix of methacrylic acid-methacrylic acid methyl ester copolymer $(Eudragit\;L_{100}^{R}:\;EL)$ as a poorly water soluble carrier and polyethylene glycole 1540 (PEG) as an water soluble carrier. HC release rate was controlled by complexation with ${\beta}-cyclodextrin$ $({\beta}-CyD)$ which was confirmed by X-ray diffractometry, IR-spectroscopy and differential scanning calorimetry. Release rate of HC from the EL-PEG matrix suppositories decreased with increase of EL contents. The release rale from $HC-{\beta}-CyD$ complex decreased in the following order: $HC-{\beta}-CyD/PEG$ > HC/PEG > $HC-{\beta}-CyD/EL_{10%}-PEG$ > $HC/EL_{10%}-PEG$ > $HC-{\beta}-CyD/EL_{15%}-PEG$ > $HC/EL_{15%}-PEG$ > $HC-{\beta}-CyD/EL_{20%}-PEG$ > $HC/EL_{20%}-PEG$. The crystallinity of HC in polymer matrix was identified using X-ray diffractometer and the surface of matrix suppositories after release test was examined by scanning electron microscopy. The sustained release of HC from these matrix suppositories was attributed to the network structure of EL.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.17-21
• /
• 2001

We proposed that concentrations of cartier electron as well as ionized donor defects in nonstoichiometric ZnO are proportional to $P^{-1/2}_{O_2}$, whenever they ionizes singly or doubly, by employing the Fermi-Dirac (FD) statistics for ionization of the native thermal defects $Zn_i$ and $V_o$. The effect of acceptor defect, zinc vacancy $V_{Zn}$made by the Frenkel and Schottky disorder reactions, on carrier concentrations was discussed. By application of the FD statistics law to their ionization while the formation of defects is assumed governed by the mass-action law, the calculation results indicate; 1. ZnO shows n-type conductivity with $N_D>$N_A$ and majority concentration of $n{\propto}\;P^{-1/2}_{O_2}$ in a range of $P_{O_2}$, lower than a critical value. 2. As the concentration of acceptor $V_{Zn}$ increases proportional to $P^{1/2}_{O_{2}}$, ZnO made at extremely high $P_{O_{2}}$, can have p-type conductivity with majority concentration of p ${\propto}\;P^{-1/2}_{O_{2}}$. One may not, however, obtain p-type ZnO if the pressure for $N_{D}<$N_{A}$ is too high.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.343-347
• /
• 2007

Novel composite membranes, which delivered high separation performance for propylene/propane mixtures, were developed by coating inert poly(ethylene-co-propylene) rubber (EPR) onto a porous polyester substrate, followed by the physical distribution of $AgBF_4$. Scanning electron microscopy-wavelength dispersive spectrometer (SEM-WDS) revealed that silver salts were uniformly distributed in the EPR layer. The physical dispersion of the silver salts in the inert polymer matrix, without specific interaction, was characterized by FT-IR and FT-Raman spectroscopy. The high separation performance was presumed to stem from the in-situ dissolution of crystalline silver ionic aggregates into free silver ions, which acted as an active propylene carrier within a propylene environment, leading to facilitated propylene transport through the membranes. The membranes were functional at all silver loading levels, exhibiting an unusually low threshold carrier concentration (less than 0.06 of silver weight fraction). The separation properties of these membranes, i.e. the mixed gas selectivity of propylene/propane ${\sim}55$ and mixed gas permeance ${\sim}7$ GPU, were stable for several days.

• Journal of Information Display
• /
• 제7권2호
• /
• pp.26-30
• /
• 2006

Insertion of a thin lithium fluoride (TLF) layer between an emitting layer (EML) and an electron transporting layer has resumed in the developement of a highly efficient and bright organic light-emitting diode (OLED). Comparing with the performance of the device as a function of position with the TLF layer in tris-(8-hydroxyquinoline) aluminum $(Alq_{3})$, we propose the optimal position for the TLF layer in the stacked structure. The fabricated OLED shows a luminance efficiency of more than 20 cd/A, a power efficiency of 12 Im/W (at 20 mA/$cm^{2}$), and a luminance of more than 22 000 cd/$m^{2}$ (at 100 mA/$cm^{2}$), respectively. We suggest that the enhanced performance of the OLED is probably attributed to the improvement of carrier balance to achieve a high level of recombination efficiency in an EML.

• Mass Spectrometry Letters
• /
• 제7권3호
• /
• pp.79-83
• /
• 2016

We prepared solid dispersion formulations of quercetin to enhance its solubility and dissolution rate. Various quercetin-loaded solid dispersion were tested with quercetin, poloxamer 407, and carrier such as hydroxypropyl methyl cellulose (HPMC), polyethylene glycol 8000 (PEG 8000), and polyvinylpyrrolidone K40 (PVP K40) using solvent evaporation and freeze drying methods in terms of both the aqueous solubility and the dissolution rates of quercetin. The solubility of quercetin as its solid dispersion formulations was markedly improved compared with that of quercetin powder. Especially, highest solubility of quercetin was observed when HPMC was used as a carrier. The cumulative dissolution of quercetin within 360 min from solid dispersion composed of quercetin, poloxamer 407, and HPMC was 8.8-fold higher than the dissolution of pure quercetin. The results of powder X-ray diffraction (XRD) and scanning electron microscope (SEM) indicated that quercetin transformed from a crystalline to an amorphous form through the solid dispersion formulation process. These results suggest that the solid dispersion formulation of quercetin with poloxamer 407 and HPMC could be a promising option for enhancing the solubility and dissolution rate of quercetin.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.88-91
• /
• 2008

This study examined the effect of Sn co-doping on the transport and magnetic properties of Cr-doped $In_2O_3$ thin films grown on (100) silicon substrates by pulsed laser deposition. The experimental results showed that Sn co-doping enhances the magnetization and appearance of the anomalous Hall effect, and increases the carrier (electron) concentration. These results suggest that the conduction carrier plays an important role in enhancing the ferromagnetism of a laser-deposited Cr-doped $In_2O_3$ film, which may have applications in transparent oxide semiconductor spin electronics devices.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.514-517
• /
• 2005

Effects of nitrogen and oxygen annealing on the carrier concentration, carrier mobility, electrical resistivity and PL characteristics as well as the crystallinity of ZnO films deposited on sapphire substrates by atomic layer deposition (ALD). X-ray diffraction (XRD), Scanning electron microscope (SEM), photoluminescence (PL) analyses, and Hall measurement were performed to investigate the crystallinity, optical properties and electrical properties of the ZnO thin films, respectively. According to the XRD analysis results the crystallinity of the ZnO film annealed in an oxygen atmosphere is better than that of the ZnO film annealed in a nitrogen atmosphere. Annealing undoped ZnO films grown by ALD at a high temperature above $600^{\circ}C$ improves the crystallinity and enhances W emission but deteriorates the electrical conductivity of the flms. The resistivity of the ZnO film annealed particularly at $800^[\circ}C$ in a nitrogen atmosphere is much higher than that annealed at the same temperature in an oxygen atmosphere.