• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.235-240
• /
• 2008

The large size electromagnetic flowmeter was tested to investigate the variation of its error characteristics in the range of low velocity under 0.6 m/s using flowmeter calibration system. For the two case of valve opening rate 100 % and 50 %, these tests were undertaken three times each for twelve velocity condition from $0.05\;^m/s\;to\;0.6\;^m/s$ with increment of $0.05\;^m/s$. It is shown that error characteristic of electromagnetic flowmeter was stabilized within ${\pm}0.4%$ of rate both higher than $0.25^m/s$ of velocity condition and 50 % of valve opening position. But, measurement deviation of flowmeter for ${\Phi}400mm\;and\;{\Phi}600mm$ was out of expected deviation range. It is necessary to correction with calibration. In conclusion, error characteristic of electromagnetic flowmeter wasn't changed proportion to its size.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권2호
• /
• pp.114-126
• /
• 2013

In this paper, we present a set of methodologies to model the electromagnetic susceptibility (EMS) testing of I/O buffers for mobile system memory based on the bulk current injection (BCI) method. An efficient equivalent circuit model is developed for the current injection probe, line impedance stabilization network (LISN), printed circuit board (PCB), and package. The simulation results show good correlation with the measurements and thus, the work presented here will enable electromagnetic susceptibility analysis at the integrated circuit (IC) design stage.

• Journal of Electrical Engineering and Technology
• /
• 제2권1호
• /
• pp.102-105
• /
• 2007

Effects of $Ag_2O$ doping on the electromagnetic properties in the BiSrCaCuO superconductors. The electromagnetic properties of the $Ag_2O$ doped and undoped BiSrCaCuO superconductor were evaluated to investigate the contribution of the pinning centers to the magnetic effect. It was confirmed experimentally that a large amount of magnetic flux was trapped in the $Ag_2O$ doped sample than that in the undoped one, indicating that the pinning centers of magnetic flux are related closely to the occurrence of the magnetic effect. It is considered that the area where normal conduction takes place increases by adding $Ag_2O$ and the magnetic flux penetrating through the sample increases. The results suggested that Ag acts to increase the pinning centers of the magnetic flux, contributing to the occurrence of the electromagnetic properties.

• 한국전자파학회논문지
• /
• 제24권2호
• /
• pp.180-188
• /
• 2013

W-대역 도파관 잡음원 교정을 위한 잡음 측정 시스템을 구성하고, 기본적인 특성에 대하여 논하였다. 잡음 측정 시스템은 상용 잡음 지수 분석기, W-대역 주파수 변환기, 그리고 국부발진기로 구성되어 있다. 일반적으로 잡음원 교정에는 Y인자법이 사용된다. Y인자법에서는 잡음 수신 시스템의 출력이 입력 잡음 전력과 선형적이라는 가정을 전제한다. 그러므로 잡음 측정 시스템의 선형성은 시스템의 성능을 결정하는 기본적인 파라미터이다. 잡음 측정 시스템의 선형성은 믹서부, 중간 주파수(IF)부, RF부로 나누어 평가하였으며, 각각 0.24 dB, 0.05 dB, 0.20 dB이다. 또, 잡음 측정 시스템의 잡음 지수는 7~17 dB로 평가되었다. 이 잡음 측정 시스템은 잡음원 교정뿐만 아니라, 여러 가지 전기전자 소자, 기기, 그리고 시스템의 잡음 특성 평가에도 활용될 것이다.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1573-1578
• /
• 2011

이 논문에서는 전자기구동시스템을 기반으로 이동 및 드릴링 기능을 수행하는 의료용 마이크로로봇 시스템을 제작하고 평가하였다. 마이크로로봇은 너무 작아 내부에 배터리나 제어장치를 삽입 할수 없다. 이 결점을 극복하기 위하여 외부에서 전자기 코일 시스템을 이용하여 전자기장의 힘으로 마이크로로봇을 구동 시킨다. 전자기 구동 코일 시스템은 x, y, z 각축에 사각형 타입의 헬름홀쯔 코일 3 쌍과 z축에 솔레노이드형 맥스웰 코일 1 쌍이 배치 되어 있고, 각 코일에 인가되는 전류값의 조절에 따라 구동에 필요한 자기장을 발생 시킨다. 다양한 실험을 통하여 우리는 제안된 시스템을 이용하여 마이크로로봇이 3 차원 공간에서 이동 가능하며 드릴링 기능을 수행할 수 있다는 것을 보였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.187-190
• /
• 2002

The Electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. but Increasing awareness of electromagnetic compatibility(EMC) issues in lighting application, the problems of interference generation by electrodeless fluorescent lighting system have been highlighted. In this paper, Maxwell 2D finite element analysis program(Ansoft) is used to obtain electromagnetic properties associated with the coil and nearby structures. and also evaluated Flux B, H by changing the input current.

• 한국항해학회지
• /
• 제21권2호
• /
• pp.69-75
• /
• 1997

A modern electric system located at a certain distance from the discharge may respond with unexpected sensitivity, when an electrostatic discharge (ESD) phenomenon occurs heteronomously between metallic objects. For analyzing the transient electromagnetic fields caused by ESD, two resistance formulas - Toepler and Rompe-Weizel -are introduced. The experimental result given by Wilson-Ma are used to compare which of these resistance formulas is proper.

• Journal of applied mathematics & informatics
• /
• 제11권1_2호
• /
• pp.327-340
• /
• 2003

For motion analysis electromagnetic sensors are often used to measure positions and orientations of human subjects. It is observed from several experiments of the Ergonomics Research group that there exist systematic errors and unexpected serious distortions due to some metal masses in the test area. A calibration process is necessary to fix these errors. In this article three models are proposed to correct position measurement errors based on observations from calibration experiments.

• Korean Journal of Acupuncture
• /
• 제24권4호
• /
• pp.69-84
• /
• 2007

Objectives : Intelligent thermo-acupuncture system (ITA-system) is invented for the convenient operation of thermo-acupuncture therapy. The aim of this study is to investigate the safety of 100 ㎑ electromagnetic field (EMF) made by ITA-system. Methods : We analysed the influence of this EMF on animals. In order to do experiment in the influence of EMF, male ICR mice were exposed to EMF at different distances from the ITA-system. And we examined weight, diet, behavior, organ and hematological changes. Results & Conclusions : According to the animal studies with mice about EMF influence, there was no significant difference between the control group and the exposed groups about them. In conclusion, the safety of 100 ㎑ EMF made from ITA-system through this animal research was checked.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권4호
• /
• pp.255-261
• /
• 2005

With the advent of sub-90nm technologies, the system-on-chip (SoC) and system-in-package (SiP) are becoming the trend in delivering low-cost, low-power, and small-form-factor consumer electronic systems running at multiple GHz. The shortened transistor channel length reduces the transistor switching cycles to the range of several picoseconds, yet the time-of-flights of the critical on-chip and off-chip interconnects are in the range of 10 picoseconds for 1.5mm-long wires and 100 picoseconds for 15mm-long wires. Designers realize the bottleneck today often lies at chip-to-chip interconnects and the industry needs a good model to compute the inductance in these parts of circuits. In this paper we propose a new method for extracting accurate equivalent inductance circuit models for SPICE-level circuit simulations of system-on-chip (SoC) and system-in-package (SiP) designs. In our method, geometrical meshes are created and numerical methods are used to find the solutions for the electromagnetic fields over the fine meshes. In this way, multiple-GHz SoC and SiP designers can use accurate inductance modeling and interconnect optimization to achieve high yields.