• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.897-916
• /
• 1994

The biologic potential, which is different from the piezoelectric signals, relates tooth movement at least in part to changes in bone metaboliosm in bioelectric theory. The purpose of this experiment was to determine wheather the application of half sine-wave pulsed electromagnetic fields (HSPEMF) could increase both the rate and amount of orthodontic tooth movement. Forty-three male Hartley guinea pigs, weighting approximately 255g, were utilized in this study. The animals were 35 days old at the start of the study. Laterally directed orthodontic force was applied to the maxillary central incisors of 40 Hartley guinea pigs (20 experimental, 20 control). According to the amount of orthodontic force (6g, 12g), they were divided into two sub-groups (10 experimental I, 10 experimental II, 10 control I, 10 control II). During the experimental period, experimental animals were placed in plastic animal holders with their heads positioned in an area of uniform electromagnetic field. Control animals were placed in similar plastic holders that did not carry the electric apparatus. The results were as follows : 1. The application of a HSPEMF to the experimental groups significantly increase the final amount of orthodontic tooth movement observed over a 10-day experimental period. 2. The application of a HSPEMF to the experimental groups significantly increase the velocity of orthodontic tooth movement observed over a 10-day experimental period. 3. There was no significant difference in the final amount of orthodontic tooth movement at the fourth day to the eighth day, but there was significant difference in the final amount of orthodontic tooth movement at the nineth, tenth day during a 10-day experimental period. 4. After 10 days of HSPEMF exposure & orthodontic force, the experimental groups demonstrated more osteodasts in the pressure side than control groups.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.124-125
• /
• 2001

The electro-magnetic vector equation(F=$qv{\times}B$ ; F：force, B：magnetic field, q：plus charge, v ：velocity of the charge) explains well about the rotations of electron and positron under the magnetic field[Ref.1], as in Fig.1(a). Because the electro-magnetic wave is also a motion of the alternating charge and magnetic field as in Fig.2, the force vector has all the time inwarding direction and then the wave has a rotating motion. The positron in the proton has constant charge and alternating one at the same time[Ref.2] and then the alternating charge makes the absorbing force with the alternating charge of the rotating wave ($\pi$-ray) around the nucleus[Ref.2]. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1254-1258
• /
• 2003

One of the major factors that effect sensor performance is analog noise that added in a sensor signal such as voltage. In multi-axis force sensors, error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body. The other error source is noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then proposes a method that can reduce the effect of noise signal to sensor performance. The method is to convert analog voltage signal to digital numbers near sensor body and then to read these digital signals and conduct signal processing in the computer. By this way, we can eliminate a bad effect of electromagnetic wave emitted from computer and of 60 Hz noise emitted from AC source. The proposed method is investigated through experimental demonstration. The experimental results show that it improves S/N ratio of the sensor about 40 times in our experimental setup.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1026-1029
• /
• 2003

There are always some errors in force sensing of multi-axis force sensors that aggravate sensor performance. Error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body, and the other is error due to noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then a method that can reduce the effect of noise signals. The method is to read digital signals in computer instead of analog voltage signals. We can eliminate the bad effect of electromagnetic waves emitted from computer and of 60 Hz noise emitted from AC source by the proposed method. The proposed method is investigated through experimental demonstration. The experimental results show the proposed method improves the sensor performance significantly.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.85-91
• /
• 2006

Recently, the reduction of electromagnetic vibration and noise of a capacitor motor (CRM) has become a very important subject from the standpoint of environmental improvement. Therefore, the authors have studied the characteristics of the dominant electromagnetic vibration of the CRM under load condition. In this paper, the effects of slot combination and skewed slot on the dominant electromagnetic vibration of a CRM under load condition are discussed both theoretically and experimentally. As a result, the characteristics of the dominant electromagnetic vibration for the slot combination and the reduction effect of the skewed slot on the electromagnetic vibration are clarified for a 4-pole CRM.

• 한국광학회지
• /
• 제12권6호
• /
• pp.437-445
• /
• 2001

We examine theoretically the properties of the force on Mie particles induced by evanescent fields at a system of multilayer films (including a metal film), at which the surface plasmon resonance is excited by a p-polarized plane electromagnetic wave. An expression of the surface plasmon-coupled evanescent fields produced in Kretschmann (or Sarid) geometry is expanded in terms of vector spherical wave functions, while multiple reflections between the Mie particle and the metal boundary are taken into account. The Cartesian components of the force on Mie particles by the evanescent fields are analytically formulated and numerically evaluated. The force components are increased by one or two orders of magnitude at metal boundaries over those at dielectric boundaries. As a result, we can confirm the possibility of stable manipulation or rotation of a finite-sized object by forces of surface plasmon-coupled evanescent fields.

• 한국광학회지
• /
• 제2권2호
• /
• pp.74-82
• /
• 1991

서로 마주보며 비춰진 원형편극된 두 $TEM_{00}$ 레이저 광속내에 부양된 균질구에 작용하는 광압분포를 조사하였다. 두 레이저 광속의 간섭효과를 고려하여 광압성분의 해석적 표현이 유도되었으며 정상 평면전자기파의 경우와 비교되었다. 광압분포에 대한 수치해석 결과가 제공되었으며 그 물리적 의미가 논의되었다.

• 한국전자파학회논문지
• /
• 제23권3호
• /
• pp.275-282
• /
• 2012

본 논문에서는 하이브리드 balun을 갖는 계산가능 다이폴안테나의 안테나 인자 특성을 모멘트법과 기전력법으로 계산하여 비교하고 있다. 안테나 인자의 표현식은 전력부정합손실의 개념을 적용하여 도출한 식을 사용하였으며, 안테나 인자의 계산에서 나타나는 안테나의 입력 임피던스 및 유효길이는 모멘트법과 기전력법을 적용하여 계산하고 있다. 그 결과, 모멘트법과 기전력법에 의한 입력 임피던스 특성은 최대 17 ${\Omega}$ 정도의 차이가 발생하지만, 안테나 인자 특성은 0.24 dB 이내에서 일치하고 있음을 알 수 있었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.85-92
• /
• 2008

국립해양조사원에서는 우리나라 관할 해역에 대한 국가해양기본도 조사계획을 수립하여 1996년부터 동해를 시작으로 연차적으로 한반도 주변의 해역 전체에 대한 해양조사를 실시 중에 있고, 본 논문은 1999년도에 '해양2000호'를 이용하여 서해 남부지역에서 측정한 해양 지자기 자료를 이용하였으며, 지자기 자료를 처리하고 이를 해석하는 과정에서 지자기 이상대의 원인을 밝히는데 목적이 있다. 자력자료 처리는 불량자료의 검색 및 제거, Sensor 위치보정, 선체자기장 영향 보정, 일변화 보정, 정규보정, 교차점 오차 보정 등의 과정을 거쳐 조사 해역에서의 전자력치와 지자기 이상치를 구하였다. 조사해역의 전자력 분포는 $49000\;{\sim}\;51600\;nT$로 황해 해역에서의 정상적인 전자력세기 분포 범위에 속하는 것으로 판단된다. 등자력선의 분포는 북동-남서 방향으로 분포하고 있으며 북서쪽으로 갈수록 전자력치가 증가한다. $124^{\circ}$ 49' 48" E, $35^{\circ}$ 10' 48" N $\sim$ $125^{\circ}$ 7' 48" E, $35^{\circ}$ 33' 00" N 사이 구간 해역에 대한 자기 이상과 탄성파 단면도를 비교한 결과와 모델링 결과가 기존 탄성파 탐사단면에서 밝혀진 지하지질구조와 잘 일치하고 있다. 따라서 자력이상의 분포는 대체적으로 해저면 하부에 발달되어 있는 제3기 퇴적분지와 백악기 기반암의 분포에 따른 영향을 나타내고 있는 것으로 판단된다.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.57-67
• /
• 1996

With an expansion in automation of welding processes, emphasis has been shifted from other welding processes to the GMA welding. However, there is a problem with this process that the spatter occurs very frequently. In GMA welding, there are several types in the way of metal transfer from the electrode wire to the weld pool, which have a close relatonship with the spatter genetration. This study was concerned with the spatter occurring in the short-circuiting transfer. In welding with short-circuiting, the electromagnetic force formed by the welding current facilitatics the rupture of the metal bridge between the wire and workpiece and ensures the normal process of the welding process. However, the spatter can be genetrated from the droplet because of the upward magnetic force, when the droplet contacts with the weld pool. The passage of current through the bridge results in the accumulation of the thermal energy, which causes the bridge to explode in the final stage of short-circuiting, thus forming the spatter. Based on the above phenomena in conjunction with other experimental results published, the physical phenomenon related with the occurrence of spatter was modeled and the current waveform was investigated to reduce the spatter. Finally, the fuzzy rule based method was proposed to predict the time of short-circuiting and arcing in the metal transfer.