• 전기화학회지
• /
• 제17권2호
• /
• pp.111-118
• /
• 2014

본 연구에서는 폐 리튬이차전지의 스크랩으로부터 순도 높은 황산코발트($CoSO_4$) 용액을 회수하고, 회수된 용액을 이용하여 리튬이차전지의 양극활물질인 $LiCoO_2$를 제조하여 전기화학적 특성을 평가하였다. 황산코발트의 제조는 황산과 과산화수소수를 이용하여 원료물질로부터 금속물질을 녹여내기 위한 침출단계, 가성소다를 이용한 pH 조절로 1차 불순물을 제거하기 위한 중화공정 및 D2EHPA와 $CYANEX^{(R)}272$를 이용하여 2차 불순물을 제거하기 위한 용매추출공정을 거쳐 고순도의 용액을 회수한다. 회수된 황산코발트는 증류수와 희석하여 6 wt.% 황산코발트 용액으로 만들고, 다시 옥살산과 혼합 및 교반 후 건조, 하소 및 리튬의 원료가 되는 $Li_2CO_3$ 분말과 혼합 후 합성 공정을 거쳐 이차전지의 양극활물질인 $LiCoO_2$를 제조하였다. 이를 이용하여 전극을 조립하고, 전기화학적 특성을 평가하였다. 전기화학적 특성은 본 실험에서 합성된 $LiCoO_2$와 상업용 $LiCoO_2$(Aldrich사)를 비교하였으며, 결과는 유사하거나 혹은 합성된 $LiCoO_2$가 더 우수한 것을 확인할 수 있었다. 따라서, 본 실험을 통해 양극활물질의 재활용 가능성을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1310-1314
• /
• 2006

Sulfur-substituted $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$ $(0\;\leq\;x\;\leq\;0.1)$ layered oxides have been prepared by solid state reaction under inert atmosphere. From powder X-ray diffraction analyses, all the present lithium manganates were found to be crystallized with monoclinic-layered structure. Electrochemical measurements clearly demonstrated that, in comparison with the pristine $LiMn_{0.9}Cr_{0.1}O_2$, the sulfur-substituted derivatives exhibit smaller discharge capacities for the entire cycle range but the recovery of discharge capacity after the initial several cycles becomes faster upon sulfur substitution. The effect of the sulfur substitution on the chemical bonding nature of $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$has been investigated using X-ray absorption spectroscopic (XAS) analyses at Mn and Cr K-edges. According to Mn K-edge XAS results, the trivalent oxidation state of manganese ion remains unchanged before and after the substitution whereas the local structure around manganese ions becomes more distorted with increasing the substitution rate of sulfur. On the other hand, the replacement of oxygen with sulfur has negligible influence on the local atomic arrangement around chromium ions, which is surely due to the high octahedral stabilization energy of $Cr^{+III} $ ions. Based on the present experimental findings, we have suggested that the decrease of discharge capacity upon sulfur substitution is ascribable to the enhanced structural distortion of $MnO_6$ octahedra and/or to the formation of covalent Li-S bonds, and the accompanying improvement of cyclability would be related to the depression of Mn migration and/or to the pillaring effect of larger sulfur anion.

• 한국식품과학회지
• /
• 제34권6호
• /
• pp.998-1001
• /
• 2002

신속하고 정확한 식품 중 과산화수소 분석방법을 확립하고자 물을 이동상으로 양이온수지칼럼에서 과산화수소를 분리한 후 전기화학검출기로 검출하는 Mico-LC법을 사용하였으며 여기에 사용한 전해질용액인 무수황산나트륨의 최적농도 및 검출기의 최적전압은 각각 50 mM, 0.6 V이었다. 본 Mico-LC 방법을 적용하여 국내 식품 중 토마토와 레몬에 대한 회수율을 검토한 결과 각각 98.3 및 97.4%이었으며, 국내유통식품 중 채소류 및 과실류 총 28종에 대하여 과산화 수소를 분석한 결과, 과실류인 바나나, 복숭아, 오렌지 및 딸기에서 각각 0.6, 0.5, 1.9 및 0.9 ppm, 채소류인 피망, 양파, 오이, 우엉 및 가지에서 각각 0.5, 0.6, 0.9, 0.8 및 0.4 ppm이 검출되었으며 나머지 19종은 모두 불검출이었다.

• 대한약리학회지
• /
• 제28권1호
• /
• pp.1-9
• /
• 1992

최근에 개발된 생체내 미세투석법을 이용하여 정상혈압 흰쥐(WKY)와 자연발생성 고혈압 흰쥐(SHR)의 후 시상하부에서 세포외액의 모노아민과 그 대사체들을 측정하였다. 뇌정위 고정장치에 의해서 미세투석관을 후 시상하부에 위치시킨후 링거액으로 관류하였다. 모노아민과 그 대사체들은 고속액체 크로마토그라피와 전기화학 검출기를 이용하여 정량하였다. 미세투석관의 시험관내 회수율 검사 결과, 관류액의 유속과 신경화학물질의 상대적 회수율 사이에는 역비례 관계가 있음이 확인되었다. 정상 혈압 흰쥐에서 후 사상하부의 관류액으로 부터 축정한 각종 신경화학물질의 세포외액 농도는 도파민 32nM, 노르에피네프린 50nM, 에피네프린 50nM, 세로토닌 73nM, 3.4-dihydroxyphenylacetic acid(DOPAC) 281 nM, homovanillic acid(HVA) 181 nM, 5-hydroxyindoleacetic acid(5HIAA) 3767nM이었다. 후 시상하부에서 측정된 신경전달물질의 기준치는 WHY와 SHR사이에 차이가 없었으나, DOPAC, HVA, 5HIAA의 기준치는 WKY에 비해서 SHR에서 유의하게 높게 나타났다. 본 연구는 중추 신경화학물질들의 생체내 측정에 미세투석법을 이용할 수 있음을 보여주었다.

• 대한한의학회지
• /
• 제25권4호
• /
• pp.1-7
• /
• 2004

Objective : This study was designed to examine the effects of orally administered Prunus persica water extract (PPE), which is used as herbal medicine, for treatment of Yu Xue (stasis of blood) and tacrine on the basal concentration of extracellular acetylcholine in the hippocampus of rats. Methods: To investigate the effects of PPE and tacrine on concentration of extracellular acetylcholine in the hippocampus of rats, the microdialysis technique, under the same experimental conditions, was used. And we used male Wistar rats which were 7 weeks of age and 210-290 g. PPE was extracted with boiling water, and the rats were anesthetized with pentobarbital Na. Their skulls were exposed and a hole was drilled for implantation of a microdialysis probe. In order to increase the recovery of acetylcholine, a probe with a long membrane was used. One day after surgery, the microdialysis probe was perfused with Ringer's solution at a flow rate of 1.5 l/min. The acetylcholine concentration in dialysis samples was measured by high-performance liquid chromatography (HPLC) with electrochemical detection. AChE activity was measured using the radiometric method, as described by Sherman. Results : The comparative effects of PPE and tacrine on hippocampal extracellular acetylcholine concentration was that these cholinesterase inhibitors produced dose-dependent increases in the extracellular acetylcholine concentration. And the effect of PPE and tacrine on rat brain AChE activity was that PPE produced maximal inhibition at 1 h after administration, when AChE activity was 44% of the intact level. AChE activity gradually recovered thereafter, and reached 78% of the intact level at 12 h after administration. Conclusion : In this study, PPE has a potent activity and a long-lasting effect on the central cholinergic system, in terms of the basal concentration of extracellular acetylcholine in the hippocampus and the AChE activity in the brain of rats. And oral administration of PPE increased dose-dependently the basal concentration of extracellular acetylcholine in the hippocampus of rats. PPE may be one of the more useful cholinesterase inhibitors for the treatment of Alzheimer's disease.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.33-36
• /
• 2008

The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1241-1249
• /
• 2002

The extent of materials deterioration can be evaluated accurately by mechanical test such as impact test or creep test. But it is almost impossible to extract a large test specimen from in-service components. Thus material degradation evaluation by non-destructive method is earnestly required. In this paper, the material degradation for virgin and several aged materials of a Cr-Mo-V steel, which is an candidated as structural material of the turbine casing components for electric power plant, is nondestructively evaluated by reactivation polarization testing method. And, the results obtained from the test are compared with those in small punch(SP) tests recommended as a semi-nondestructive testing method using miniaturized specimen. In contrast to the aged materials up to 1,000hrs which exhibit the degradation behaviors with increased ${\Delta}[DBTT]_{SP}$, the improvement of mechanical property can be observed on the 2,000hrs and 3,000hrs aged materials. This is because of the softening of material due to the carbide precipitation, the increase of ferritic structures and the recovery of dislocation microstructure by long-time heat treatment. The reactivation rates($I_R/I_{Crit},\;Q_R/Q_{Crit}$) calculated by reactivation current densityt ($I_R$) and charge($Q_R$) in the polarization curves exhibit a good correlation with ${\Delta}[DBTT]_{SP}$ behaviors.

• 한국분말재료학회지
• /
• 제30권1호
• /
• pp.22-28
• /
• 2023

The global demand for raw lithium materials is rapidly increasing, accompanied by the demand for lithiumion batteries for next-generation mobility. The batch-type method, which selectively separates and concentrates lithium from seawater rich in reserves, could be an alternative to mining, which is limited owing to low extraction rates. Therefore, research on selectively separating and concentrating lithium using an electrodialysis technique, which is reported to have a recovery rate 100 times faster than the conventional methods, is actively being conducted. In this study, a lithium ion selective membrane is prepared using lithium lanthanum titanate, an oxide-based solid electrolyte material, to extract lithium from seawater, and a large-area membrane manufacturing process is conducted to extract a large amount of lithium per unit time. Through the developed manufacturing process, a large-area membrane with a diameter of approximately 20 mm and relative density of 96% or more is manufactured. The lithium extraction behavior from seawater is predicted by measuring the ionic conductivity of the membrane through electrochemical analysis.

• 전기화학회지
• /
• 제26권1호
• /
• pp.1-10
• /
• 2023

리튬 이차전지의 4 대 구성요소에 포함되는 양극은 배터리의 에너지 밀도를 담당하는 중요한 구성요소에 속하며, 보편적으로 제작되는 양극의 습식 제작 공정에는 활물질, 도전재, 고분자 바인더의 혼합 과정이 필수적으로 이루어지게 된다. 하지만, 양극의 혼합 조건의 경우 체계적인 방법이 갖추어져 있지 않기 때문에 제조사에 따라 성능의 차이가 발생하는 경우가 대다수이다. 따라서, 양극의 슬러리 제작 단계에서 정돈되지 않은 혼합 방법의 최적화를 진행을 위해 보편적으로 사용되는 THINKY mixer와 homogenizer를 이용한 LiMn₂O₄ (LMO) 양극을 제조해 각각의 특성을 비교하였다. 각 혼합 조건은 2000 RPM, 7 min으로 동일하게 진행하였으며, 양극의 제조 동안 혼합 방법의 차이만을 판단하기 위해 다른 변수 조건들은 차단한 후, 실험을 진행하였다(혼합 시간, 재료 투입 순서 등). 제작된 THINKY mixer LMO (TLMO), homogenizer LMO (HLMO) 중 HLMO는 TLMO보다 더 고른 입자 분산 특성을 가지며, 그로 인한 더 높은 접착 강도를 나타낸다. 또한, 전기화학적 평가 결과, HLMO는 TLMO와 비교하여 개선된 성능과 안정적인 수명 주기를 보였다. 결과적으로 수명특성평가에서 초기 방전 용량 유지율은 HLMO가 69 사이클에서 TLMO와 비교하여 약 4.4 배 높은 88%의 유지율을 보였으며, 속도성능평가의 경우 10, 15, 20 C의 높은 전류밀도에서 HLMO가 더 우수한 용량 유지율과 1C에서의 용량 회복률 역시 우수한 특성을 나타냈다. 이는 활물질과 도전재 및 고분자 바인더가 포함된 슬러리 특성이 homogenizer를 사용할 때, 정전기적 특성이 강한 도전재가 뭉치지 않고 균일하게 분산되어 형성된 전기 전도성 네트워크를 생성할 수 있기 때문으로 간주된다. 이로 인해 활물질과 도전재의 표면 접촉이 증가하고, 전자를 보다 원활하게 전달하여 충전 및 방전 과정에서 나타나는 격자의 부피변화, 활물질과 도전재 사이의 접촉저항의 증가 등을 억제하는 것에 기인한다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1527-1527
• /
• 2001

Glucose, fructose and sucrose being the main sugars that can be found in natural fruit juice. Many instrumental methods, such as GC, LC, electrochemical or spectrometric methods provide information about both the total content of sugars and the specific concentration of each carbohydrate[1]. The simplicity of sample handling and measurement in the near IR(NIR) wavelength region, which allows the use of long pathlength, optical glass cells and optical fibers, makes NIR a good alternative for sugar determination [2]. In the present study, six varieties of persian grapes were harvested at intervals through august to october and analysed for sugars by NIR. The results were processed by principal component regression (PCR) and partial least squares (PLS) analysis. Sample juice was prepared by squeezing through gauze from crashed grape. This solution was treated by zinc ferrocyanide prior to analysis in order to eliminate colored compounds and all optically active nonsugar substances. For glucose and fructose the most characteristic wavelengths were 1456nm corresponding to the first harmonic O-H stretching and the second at 2062nm corresponding to O-H stretching and deformation; secondary characteristic combination bands were also seen at 2265 nm (O-H and C-C stretching) and at 2240 nm (C-H and C-C stretching). However these spectra were taken over a wavelength range from 1100-2500nm at room temperature of 25-$30^{\circ}C$. To test the accuracy of the described procedure, samples of six varieties of grape were analysed by the proposed NIR and a standard method[2]. Good agreement were found between these two sets of the results. To perform the recovery studies , samples of grape juices previously analysed by the proposed method, were spiked with known amounts of each individual sugars and then analysed again. Relative standard deviations varied from 1.4 to 1.8% for six independent measurements of individual and total sugar concentration. In the analysis of real and synthetic samples, precise and accurate results were obtained , providing accuracy errors lower than 1.9% in all cases. Average recoveries of ${97}{\pm}{4%}$ for total sugar and between ${95}{\pm}{5%}$ and ${99}{\pm}{2%}$ for sing1e sugars demonstrate the applicability of the methodology developed to the direct analysis of grape Juice.