• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.315-324
• /
• 2017

The smart grid with distributed power supply introduces a number of problems including not only the problems of the existing power grid but also the problem of protection co-operation due to new electric phenomenon because it has a mixed operation structure combining the existing radial operation structure and the new loop operation structure. The EMTP based power system analysis method has flexibility and convenience from the view of system configuration but it requires another experimental verification because of uncertainty of design and analysis results. On the other hand, the real demonstration system has difficulties in observing accurate fault on large scale system due to considerable economical and spatial construction cost, system configuration constraint, and it is difficult to demonstrate the distributed, autonomous and adaptive control strategy of smart grid. In this paper, a basic theory for a micro smart grid simulator design using MEMS(Micro Electro-Mechanical Systems) miniaturization technology is studied which can safely and freely experiment and observe electrical phenomena, and distribution, autonomous adaptive control strategy for disturbances on 22.9kV smart grid under minimum economic and spatial cost.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1395-1400
• /
• 2014

Diligence/Indolence records are the key data for a human resource management and the basic data to measure the salaries of the employees. However, existing mechanical or electro-magnetic diligence/indolence management systems have the problems that the systems are often incorrect or require much cost to build them. In this paper, we design and implement the diligence/indolence management system using a smart device of an employee. To measure the data of the diligence/indolence, the implemented system acquires the location data of the employee using the MAC addresses of both a smart device and access points of the WiFi and transfers the data of punching-in/out based on the acquired location to a server. The benefit of the proposed system is that it is easy for small business to use the proposed D/I management system with low cost because the system exploits smart devices and WiFi access points installed previously.

• Journal of Digital Contents Society
• /
• v.10 no.2
• /
• pp.199-207
• /
• 2009

The Q-switching the shutter or the different optical science element puts in within the laser light resonator and the storehouse departs from the within the resonator it loses the mortar and the reversal distribution which when is sufficient creates from within the active medium, opens the shutter instantaneously and it is to do to be made to emit with the light where the energy which is accumulated within the resonator is strong very. Like this Q-switching of laser resonator--It decreases factor increasing suddenly to make. To method of Laser Q-switching mechanical switching methods, electro-optic switching methods and switching by saturable absorber methods, acousto-optic switching method etc. 4 kind are being used on a large scale. In these people the conversion which is electric in compliance with the effect which is electrooptics is widely being used the Q-switching pulse of short pulse width because being it will be able to create. Consequently, Pockel cell where it has the quality of electrooptics effect) the Q-it is become known that it is suitable it uses with switch. From the research which it sees FET and one-chip microprocessor where it is a switching element and pulse transfomer to plan and produce pockel cell Q-switch driving gears, pulse style Nd: It applied in YAG Laser system and it investigated and researched the operating characteristic of the Q-switch. Also, the Q-switch leads and Nd where it is output: YAG with forecast in compliance with a theoretical calculation it comes to buy laser beam side politics it compared and laser beam qualities which had become Q-switching it analyzed.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.3-9
• /
• 2004

Silane modified perfluoropolyethers (SPFPE) was synthesized as a self-assembled mono-layers (SAMs) thin film for micro-electro mechanical system (MEMS). SPFPE was compared to the Perfluoropolyethers (PFPE) as well as octadecyltrichlorosilane (OTS) and perfluorooctyltrichlorosilane (FOTS) with respect to the development of hydrophobicity in the SAMs surface. SPFPE shows less hydrophobicity than those of OTS and FOTS. Thermal annealing of SPFPE SAMs resulted in the enhancement of hydrophobicity as much as those of OTS and FOTS. The SAMs formed from SPFPE were found to be similar as OTS and FOTS SAMs with smooth R$\sub$a/ values of 0.3 nm. However, the flexible chain mobility of SPFPE resulted in 50% reduction as much as the fiction force in OTS.

• Korean Journal of Materials Research
• /
• v.24 no.10
• /
• pp.532-537
• /
• 2014

In this study, highly sensitive hydrogen micro gas sensors of the multi-layer and micro-heater type were designed and fabricated using the micro electro mechanical system (MEMS) process and palladium catalytic metal. The dimensions of the fabricated hydrogen gas sensor were about $5mm{\times}4mm$ and the sensing layer of palladium metal was deposited in the middle of the device. The sensing palladium films were modified to be nano-honeycomb and nano-hemisphere structures using an anodic aluminum oxide (AAO) template and nano-sized polystyrene beads, respectively. The sensitivities (Rs), which are the ratio of the relative resistance were significantly improved and reached levels of 0.783% and 1.045 % with 2,000 ppm H2 at $70^{\circ}C$ for nano-honeycomb and nano-hemisphere structured Pd films, respectively, on the other hand, the sensitivity was 0.638% for the plain Pd thin film. The improvement of sensitivities for the nano-honeycomb and nano-hemisphere structured Pd films with respect to the plain Pd-thin film was thought to be due to the nanoporous surface topographies of AAO and nano-sized polystyrene beads.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.70-76
• /
• 2014

In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires us knowledge of failure mechanism and reliability of batteries in terms of load condition, environment condition and other explanatory variables. Battery life is an important factor that affects the reliability of such systems. There is need for us to understand the mechanism leading to the failure state of battery with performance characteristic and develop a method to predict the life of such battery. The purpose of this paper is to develope the methodology of monitoring the health of battery and determining the condition or fate of such systems through the performance reliability to predict the remaining useful life of primary battery with load condition, operating condition, environment change in light of battery life variation. In order to evaluate on-going performance of systems and subsystems adopting primary batteries as energy source, The primitive prototype for performance reliability analysis device was developed and related framework explained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4751-4756
• /
• 2012

Blushes are known to generate unwanted nano particles of dust and harm elements in various electro-mechanical home appliances. Subsequently, the blushless type is proposed as an eco-friendly alternative to replace the brushes. Further, the expensive magnetized rotor of the Blush-less DC (BLDC) is to be replaced in SRM, which requires complex control not to overflow the switching current the system within a budget. This paper introduces an approach to implement an efficient yet, cost-effective controller for high-speed rotation control, employing Switched Reluctance Motor (SRM) BLDC motor.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.197-202
• /
• 2008

In this paper, a hybrid vibration-impedance approaches is newly proposed to detect the occurrence of damage, the location of damage, and extent of damage in steel plate-girder bridges. The hybrid scheme mainly consists of three sequential phases: 1) to alarm the occurrence of damage, 2) to classify the alarmed damage, and 3) to estimate the classified damage in detail. Damage types of interest include flexural stiffness-loss in girder and bolts-loose in supports. In the first phase, the global occurrence of damage is alarmed by monitoring changes in acceleration features. In the second phase, the alarmed damage is classified into subsystems by recognizing patterns of impedance features. In the final phase, the location and the extent of damage are estimated by using modal strain energy-based damage index method and root mean square deviation method. The feasibility of the proposed system is evaluated on a laboratory-scaled steel plate-girder bridge model for which hybrid vibration-impedance signatures were measured for several damage scenarios.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.618-623
• /
• 2006

Hydrogenated Diamond-like carbon (DLC) films were prepared by the radio frequency plasma enhanced chemical vapor deposition (RF PECVD) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas. The wear track on the DLC films was examined after the ball-on disk (BOD) measurement with a Raman mapping method. The BOD measurement of the DLC films was performed for 1 to 3 hours with a 1-hour step time. The sliding traces on the hydrogenated DLC film after the BOD measurement were also observed using an optical microscope. The surface roughness and cross-sectional images of the wear track were obtained using an atomic force microscope (AFM). The novel Raman mapping method effectively shows the graphitization of DLC films of $300{\mu}m\times300{\mu}m$ area according to the sliding time by G-peak positions (intensities) and $I_D/I_G$ ratios.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.110-112
• /
• 2012

Education and training of technical staff for the new generation technological equipment has a vital importance for developing countries in order to maintain sustainable development and keep up with new generation technologies. Mechatronics the synergistic combination of mechanical, electronic and software engineering from an engineering perspective to serve the purposes of controlling advanced hybrid systems is a product of new generation technology which can be given as a sample to this phenomenon. Recent marine engines are combination of heavy industry with high technology. Nowadays, ships are built in full automation and equipped with computer controlled mechatronics systems. However, finding qualified officer and engineers who can operate, maintain, control and repair when it is required such full automatic systems with knowledge of a new generation system became a serious issue. Due to importance of this fact STCW Manila amendment has new training and certification requirements for electro-technical officers. In this paper, Mechatronics applications on ship are introduced, importance of it highlighted and a new syllabus is proposed for the training of marine engineers to be nurtured with mechatronics knowledge as it is required.