• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.421-422
• /
• 2007

The fringe electric field driven transflective liquid crystal display with dual orientation has a problem that the voltage-dependent transmittance and reflectance curves do not match each other, requiring a dual driving circuit to achieve a high electro-optic performance. Optimizations of the electrode structure in the array substrate and rubbing direction solve this problem so that the transflective display with a single gap and a single gamma curve for reflective and transmissive region is possible.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.114-117
• /
• 2005

We have fabricated twisted nematic (TN) cell doped by carbon nanotubes (CNTs). The CNTs with a minute amount of doping do not perturb the liquid crystal orientation in the off- and on-state. The hysteresis studies of voltage-dependent transmittance and capacitance under ac and dc electric field show that the amount of residual dc, which is related to image sticking problem in liquid crystal displays, is greatly reduced due to ion trapping by CNTs.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.34-35
• /
• 2000

A Y-branch phase modulator made of an electro-optic(EO) polymer has been designed and fabricated. An EO polymer, PMMA-DR1, is used for the core layer, and UV-curable polymers, UV-15 and UV-15 LV, for the cladding layers. The rib type polymeric waveguides are fabricated by the reactive ion etching method and their EO effects are obtained by the poling process. The optical properties of the fabricated phase modulator are as follows: the halfwave voltage, $V_{\pi}$, is 25 V, the insertion loss of TM mode is 13.8 dB, and the intensity modulation is 0.17 % (V).

• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.738-742
• /
• 1998

A new polyamide was prepared from 4,4'-(hexafluoroisopropylidene)di-aniline and 4-[NN-bis(2-carboxyethyl)] amino-4'-nitrostilbene. This polymer was cast into thin films by spin coating cyclohexanone solution. After being poled, the electro-optic coefficients of electrode poled polymer films were measured by the reflection measurement technique using an incident laser beam of 1.3 Jim. The film poled at the field strength of 1.2 V/μm exhibited the electro-optic coefficient (r33) of 5.9 pm/V. The relaxation behavior of the poled polymer film was compared with other reported polymers bearing the same NLO chromophores. Due to stiff and highly polar nature of the backbone and also due to formation of interchain hydrogen bonds, this polymer reveals a slower relaxation characteristics. The polymer is amorphous and soluble in various organic solvents.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.431-435
• /
• 2018

A modified setup of a CMD technique for high power coherent beam combining was presented to address an issue of low damage threshold of electro-optic modulators. The feasibility of the modified setup was demonstrated by combining eight fiber beams, and it was successfully performed with ${\lambda}/44$ of residual phase error and 100 Hz of control bandwidth. It is expected that the modified CMD setup facilitates ultra-high power coherent beam combination without a limitation caused by the low damage threshold of electro-optic modulators.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.121-124
• /
• 1997

Emergence of advanced materials has been realized by the great demands for sophisticated state devices in high technology industry. It is the ear of speedy evolution of science and technology, in particular, materials processing technology, which enables us to synthesize any materials with respect to its purity and its perfection of crystal structure and shape (form) that have, heretofore not been available. The availability of ultra pure, fine raw materials, single crystals and thick/thin film materials has been largely responsible for such startling progresses that have been made in the realization of unforeseen, functional devices for high technology industry. Of the functional devices such as passive as active devices, non-silicon devices are mostly passive. Piezoelectric, electro-optic, magneto-optic devices, etc. are some of the examples. In this paper, magneto-optic materials for Faraday device, which is little known, are reviewed including its processing toward practical applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.415-418
• /
• 2002

We have studied electro-optic properties and layer deformations in the smectic phases of 4-(6ethoxy-l-trifluoromethyl-hexyloxycarbonyl)-phenyl-4-Nonyloxybiphenyl-4-carboxylat ( TFMEOHPNBC ) having fluorine attached to one of its benzene rings by electro-optical and small angle x-ray scattering techniques. 3 and 5${\mu}m$ thick test cells were prepared using beryllium plates to minimize x-ray beam absorption. Layer structure and orientation was studied while changing the amplitude and frequency of the applied electric field as a function of cell temperature. We observed that the chevron layer tilt angle is reduced and layer spacing is increased as stabilizing in antiferroelectric phase. This result is extraordinary that there is dimerization in antiferroelectric phase. We also found that there is a threshold electric field that changes the chevron structure to bookshelf structure. This threshold electric field depends on the frequency and temperature as shown in Fig.1. We will discuss the dynamics of layer orientation as determined from the x-ray, electro-optic and dielectric spectroscopy.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.109-114
• /
• 1991

좋은(sub=micron) 분해능을 갖는 Photoresist film의 방법에 의한 Micro-Lithography의 발달은 반도체, Electro-Optic 등의 첨단산업에 큰 기여를 하였다. 본 내용은 이러한 PR을 이용한 Lithography System의 광학적인 원리에 대해 소개하고자 한다.

• Polymer Science and Technology
• /
• v.21 no.1
• /
• pp.33-40
• /
• 2010