• 대한전기학회논문지:전력기술부문A
• /
• 제48권7호
• /
• pp.903-908
• /
• 1999

In this paper, it is proposed the phase shifter array active system to receive digital satellite broadcasting for vehicle. To receive satellite broadcasting data in vehicle, it is inevitable to have active antenna system, which traces the satellite in real time. Also if it is used in vehicle, it must be thin and light structure. To develop this type of antenna system, several techniques should be integrated properly. These are the design and manufacturing technique of high gain antenna, algorithm for tracking satellite and its manufacturing technique, controller design and manufacturing technique, system integration technique and so on. The validity of the proposed AVDBS system was confirmed by simulation and experimental results.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권4호
• /
• pp.208-215
• /
• 2013

Early iterations of the existing Global Positioning System (GPS)-based or radio lateration technique-based vehicle localization algorithms suffer from flip ambiguities, forged relative location information and location information exchange overhead, which affect the subsequent iterations. This, in turn, results in an erroneous neighbor-vehicle map. This paper proposes an extended information overlap measure (EIOM) algorithm to reduce the flip error rates by exchanging the neighbor-vehicle presence features in binary information. This algorithm shifts and associates three pieces of information in the Moore neighborhood format: 1) feature information of the neighboring vehicles from a vision-based environment sensor system; 2) cardinal locations of the neighboring vehicles in its Moore neighborhood; and 3) identification information (MAC/IP addresses). Simulations were conducted for multi-lane highway scenarios to compare the proposed algorithm with the existing algorithm. The results showed that the flip error rates were reduced by up to 50%.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.520-525
• /
• 2016

In this paper, Characteristic of power conversion unit of a railway vehicles according to contact loss in feeding system that applied impedance of rigid conductor is analyzed. It applied impedance of rigid bar in modeling of electric railway system. Railway vehicles are performed of modeling based on the performance of the electric railway vehicle. Effects of the contact loss in the power conversion unit were analyzed via main transformer of railway vehicle, the input and output voltage characteristics of the converter through contact loss was generated after linking the vehicle with feeding system.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1955-1961
• /
• 2007

In this paper, we propose the mathematical model for the vehicle system including running characteristics. The well defined model for a system is necessary to study and to enhance system performance. To model the dynamic properties of vehicle system, we have considered two fundamental parts. The first part is the motion equations for vehicle based on Newton's second law. The second part is the torque dynamics of the traction motor. These parts are affected by outer conditions such as adhesive coefficient, running resistance and gradient resistance. The each parts are presented by the numerical formula. To test the driving characteristics of the developed model, we performed the simulations by dynamic system simulation software, "SIMULINK" and the results are given for several conditions.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1528-1534
• /
• 2015

This paper designed the railway vehicle running device with a proto-type for the railway vehicle maintenance training and developed a propulsion control device simulator equipped the imitation steering wheel. In addition, this paper applied a multi-thread technology in order to implement the staged fault and the propulsion control device protected operation test and an implementation of the failure that occur in actual rail vehicle and confirm the validity as the propulsion control device simulator for the maintenance training.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.930-937
• /
• 2012

Newly developed Series hybrid low-floor articulated vehicle which can meet both road and railway running conditions. It has the rated driving speed of 80 km/h and three driving modes with hybrid(engine+battery) driving mode, engine driving mode, battery driving mode. The battery driving mode requires the several 10 km running without additional charging operation. The vehicle has been equipped with LPB (lithium polymer battery) pack for the series hybrid propulsion system. LPB pack consists of 168 cells (3.7 V in a cell, 80 Ah) in series, DC Circuit breaker, mechanical rack, BMS (battery management system). This paper has shown the design process of LPB pack and application to the vehicle. Driving results in the road was successful to be satisfied with the requirement of the series hybrid vehicle.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.84-91
• /
• 2019

This study proposes a AC/DC railway vehicle control algorithm that enables simultaneous driving of AC and DC power supply sections. In the Seoul metropolitan region, trolley voltage for railway vehicle is divided into AC and DC power supplies. Therefore, AC/DC railway vehicle algorithm is essential for driving on the outskirts of the region. This study analyzes resonance and beat phenomena for simultaneously running in AC and DC power supply sections, and proposes a control algorithm for railway vehicles with the application of damping and beatless controls based on this analysis. The performance of the proposed algorithm is verified by simulation and analysis of actual driving results.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.509-516
• /
• 2012

This paper describes the testing and experimental characterization of a linear permanent magnet actuator, which is designed and developed for active vehicle suspension, under both static and dynamic conditions. Since the active suspension unit operates over a wide force-velocity range with varying duty ratios, it is essential to establish an effective thermal model which can be used for assessing temperature rise of the actuator under various operating conditions. The temperature rise of the actuator is measured and the results are compared with the prediction by the derived transient thermal model. It is shown that the measured actuator parameters and characteristics are closed to their predicted values. The linear actuator is controlled by a dSPACE system via a three phase inverter and its velocity tracking performance is presented.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.24-33
• /
• 2006

This experiment explains about electrical braking equipment which will be used for 1.2kW PEMFC HEV. The equipment is made of BLDC motor and super capacitor(EDLC). The circuit is designed for regeneration braking that can save the energy from low voltage of generation with BLDC motor. Increasing a regeneration energy from braking system is effected with regeneration current and SoC of super capacitor(EDLC). Electrical braking in electrical vehicle is suitable for regeneration braking with dynamic braking together.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.178-182
• /
• 2014

This paper investigates the lighting environment of railway system which are mainly used in KTX, Saemaul and Mugunghwa. When lighting used in KTX such as fluorescent lamp and incandescence is being replaced with LED lamp, illumination load of each railroad vehicle has been compared. The comparison result shows that the reduction of power consumption is 43.34% before and after the change. Also it has been performed the economic evaluation.