• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.161-169
• /
• 2006

Load representation has a significant impact on power system analysis and control results. In this paper, composite load models are developed based on on-line measurement data from a practical power system. Three types of static-dynamic load models are derived: general ZIP-induction motor model, Exponential-induction motor model and Z-induction motor model. For the dynamic induction motor model, two different third-order induction motor models are studied. The performances in modeling real and reactive power behaviors by composite load models are compared with other dynamic load models in terms of relative mismatch error. In addition, numerical consideration of ill-conditioned parameters is addressed based on trajectory sensitivity. Numerical studies indicate that the developed composite load models can accurately capture the dynamic behaviors of loads during disturbance.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.519-522
• /
• 2005

This paper presents a self-organizing scheme for multi-agent swarm systems based on coupled nonlinear oscillators (CNOs). In this scheme, unicycle robots self-organize to flock and arrange group formation through attractive and repulsive forces among themselves. It is also shown how localized distributed controls are utilized throughout group behaviors such as formation and migration. In the paper, the proposed formation ensures safe separation and good cohesion performance among the robots. Several examples show that the proposed method for group formation performs the group behaviors such as reference path following, obstacle avoidance and flocking, and the formation characteristics such as flexibility and scalability, effectively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.194-200
• /
• 2000

Sb-doped tin oxide films were deposited on Corning glass 1737 substrate by plasma enhanced chemical vapor deposition(PECVD) technique using a gas mixture of SnCl4/SbCl5/O2/Ar. The deposition behaviors of tin oxide films by PECVD were compared with those by thermal CVD, and effects of deposition temperature, r.f. power and Sb doping on the electrical properties of tin oxide films were investigated. PECVD technique largely increased the deposition rate and smoothed the surface of tin oxide films compared with thermal CVD. Electrical resistivity decreased with doping of Sb due to the increase of carrier concentration. However, large doping of Sb diminished carrier concentration and mobility due to the decrease of crystallinity, which resulted in the increase of electrical resistivity. As the deposition temperature and r.f. power increased, Cl content in the film decreased.

• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.351-359
• /
• 2022

The present study investigated the synergistic effects of carbon nanotube (CNT) and carbon black (CB) inclusions on the piezoresistive sensing behaviors of cementitious composites. Four different CNT and CB combinations were considered to form different conductive networks in the binder material composed of Portland cement and fly ash. The cement was substituted with fly ash at levels of 0 or 50% by the mass of binder. The specimens were cured up to 100 days to observe the variations of the electrical characteristics with hydration progress, and the piezoresistive sensing behaviors of the specimens were measured under cyclic loading tests. The fabricated specimens were additionally evaluated with flowability, resistivity and cyclic loading tests, and morphological analysis. The scanning electron microscopy and energy disperse X-ray spectroscopy test results indicated that CNT and CB inclusion induced synergistic formations of electrically conductive networks, which led to an improvement of piezoresistive sensing behaviors. Moreover, the incorporation of fly ash having Fe³⁺ components decreased the electrical resistivity, improving both the linearity of fractional changes in the electrical resistivity and reproducibility expressed as R² under cyclic loading conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.427-429
• /
• 2002

In this paper, we investigated dynamic behaviors of liquid crystal director profiles by simulating two different modeling equations based on vectorial and tensorial approaches. By performing 3-dimensional simulation for a unit pixel, we found that the simulation results from the each of modeling equations lead to different motional behaviors of liquid crystal directors around the disclination line. This is due to the fact that the vectorial approach has a physically meaningless sign of liquid crystal director ${\overline{n}}$. Consequently, it is clarified that the tensorial approach gives more realistic behaviors for the rotation of the directors around the disclination line when the voltages were removed since it maintains nematic symmetry that gives an equivalence of ${\overline{n}}$ and its opposite - ${\overline{n}}$.

• Steel and Composite Structures
• /
• v.35 no.4
• /
• pp.545-554
• /
• 2020

The present paper explores nonlinear dynamical properties of piezo-magnetic beams based on a nonlocal refined higher-order beam formulation and piezoelectric phase effect. The piezoelectric phase increment may lead to improved vibrational behaviors for the smart beams subjected to magnetic fields and external harmonic excitation. Nonlinear governing equations of a nonlocal intelligent beam have been achieved based upon the refined beam model and a numerical provided has been introduced to calculate nonlinear vibrational curves. The present study indicates that variation in the volume fraction of piezoelectric ingredient has a substantial impact on vibrational behaviors of intelligent nanobeam under electrical and magnetic fields. Also, it can be seen that nonlinear free/forced vibrational behaviors of intelligent nanobeam have dependency on the magnitudes of induced electrical voltages, magnetic potential, stiffening elastic substrate and shear deformation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.3
• /
• pp.95-101
• /
• 2000

In this paper, an improved method for magnetic inspection to detect surface of a conductor is presented. The presented method is based on the technique of ECP(Electric Current Perturbation), which is to measure the variation of current flow due to defects with a magnetic sensor. The inspection performance is improved by using high frequency current behaviors in order to concentrate the current near the defect and employing the resonant frequency of a search coil as an operating frequency. By analytical results and experiments of the test specimens, the feasibility of the inspection method is shown.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.379-387
• /
• 1999

In general, solving or analyzing nonilinear dynamical equations is very difficult and requires special techniques. To avoid these difficulties, systems are generally linearized in an attempt to predict their begavior. These linearized equations, however, may not predict true system behavior. Therefore, the nonlinear dynamical analysis using bifurcation theory may become a fundamental framework in understanding nonlinear situation in power systems. In this paper, we propose a systematic procedure based on a bifurcation theory to analyze nonlinear behaviors in power systems. We show usefulness of our procedure by applying 3-bus model system. In addition, we consider nonlinear model of SMES and verify the effect of SMES in power system's nonlinear behaviors.

• Korean Journal of Agricultural Science
• /
• v.43 no.2
• /
• pp.194-204
• /
• 2016

The pear psylla, Cacopsylla pyricola, is a very small sap-feeding insect of many commercial pear varieties that could be considered the most serious insect pest of pear. Detailed information on plant penetration activities of the pear psylla is essential to study its feeding behavior used to evaluate resistant traits to chemical control. The application of the electrical penetration graph technique (EPG) could provide a relevant insight into the nature of this resistance. EPG waveforms of C. pyricola were characterized on the basis of amplitude, frequency, voltage level, and electrical origin. Feeding behaviors of C. pyricola were recorded and analyzed by EPG analysis. During EPG monitoring, waveform PA occurred at the start of stylet penetration of pear leaf epidermal cell. Waveform PB followed, in which stylet secreted saliva was observed. Waveforms PC1 and PC2 involved penetrating and sucking behaviors in parenchyma cells and vascular parenchyma, respectively. In addition, waveform PC1 represented salivation into bundle sheath cells and ingestion from parenchyma. Otherwise, behaviors of salivation into phloem and ingestion from phloem produced waveforms PE1 and PE2, respectively. On the other hand, ingestion from xylem tissues showed waveform PG. Among the feeding patterns of C. pyricola described above, phloem feeding patterns occurred most frequently, followed by xylem feeding and parenchyma penetration patterns in descending order.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.52-55
• /
• 1988

Tunsten silicide (WSix) films on polycrystalline silicon were formed by low-pressure chemical vapor deposition (LPCVD) and were annealed in $N_2$ for 30 mins at various temperatures. The annealing behaviors of tungsten silicide films have been investigated by electrical resistivity measurements, X-ray diffraction methods, scanning electron microscopy (SEM) and Hall measurements. The electrical resistivity decreased almost linearly with increasing annealing temperature and reached $35{\mu}{\Omega}-cm$ at $1000^{\circ}C$ annealing. The X-ray and SEM analyses indicate that crystallization of $WSi_2$ and grain growth occurs when annealed above $1000^{\circ}C$. Excess silicon redistribution occurs considerably when annealed above $1000^{\circ}C$. By Hall measurements, the carrier type for specimens annealed at $1000^{\circ}C$ was found to be positive holes, while the carriers were electrons in the specimens that were annealed at $800^{\circ}C$.