• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.130-135
• /
• 2001

In this study, I have researched into the causes of defects in apartment house, The results of this study are listed below. (1) Water leakages which result from land sinking and cracks, results of misuse of back filling method, are the main reason of defects in civil engineering work and architectural work. (2) Inexperience and unwillingness are the main reason of defects in plaster work. (3) In windows work and painting work, the main reasons are lacks of precision construction and efflorescence resulting from outdoor air, respectively. (4) Defects in waterproofing work and electric work result from fault construction by low unit Costs. (5) Equipment work requires uses of standardized construction materials and management, and landscape architecture work requires minimizing human mistakes, for instance, degin carelessness. For the reasons stated above, the causes of defects in apartment house are insufficient construction labors, inferior construction materials, urgent construction process time, and conscientiousless industrialists who only seek after a profit margin.

• 전기저널
• /
• 11호통권143호
• /
• pp.8-13
• /
• 1988

• 전기저널
• /
• 7호통권163호
• /
• pp.54-59
• /
• 1990

• 화약ㆍ발파
• /
• 제32권1호
• /
• pp.23-30
• /
• 2014

국내 화약류에 대한 전반적인 관리와 발파작업에 대한 규정은 총포 도검 화약류등 단속법에 의하여 관리되고 있으나, 세부적인 취급과 사용법에 대한 지침은 산업안전보건법 제27조에 의거하여 발파작업 표준 안전작업지침을 마련하여 발파작업에서의 재해예방을 위한 화약류의 취급, 운반, 저장, 사용 및 관리와 작업상의 안전에 관하여 사업자에게 지도 권고하고 있다. 본 연구에서는 고용노동부에서 고시한 발파작업 표준 안전작업지침에 대하여 검토하였고, 국내화약시장에 도입된 신제품과 최신발파기술이 지침의 개정 시 반영될 수 있도록 화약류에 대한 용어의 정의와 추가로 포함해야 하는 에멀젼계 폭약과 벌크형태의 폭약, 그리고 최근 국내 발파현장에서 사용이 증가하고 있는 전자뇌관에 대하여 수록을 제안하였다. 또한, 작업지침에 대해서는 비전기식 뇌관과 전자뇌관의 대표적인 취급 방법을 예시를 들어 제안하여 지침안 개정 시 보완된 발파작업 표준 안전작업지침을 마련하도록 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1051-1053
• /
• 1999

In this work, thermal phenomena and temperature rise due to thermal source in electric switchboard were investigated using analytical measures. Electric switchboards are assemblies of panels on which are mounted switches, circuit breakers, high current busbars, meter, fuses and terminals essential to the operation of electric equipment. It is very difficult to predict the temperature rise in switchboard due to the existence of several heat sources. To overcome this situations, we focused on the eddy current distribution on the panel of switchboard caused by high current busbars as a fundamental basis. And thermal sources including busbar and switchgear have been considered. Furthermore, thermal transfer phenomena in switchboard was considered theoretically. Finally, three-dimensional thermal model for eddy current analysis has been adopted and FEM analysis was conducted. As a result, three-dimensional numerical analysis found to be applicable to the analysis of thermal phenomena in switchboard.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.247-249
• /
• 2009

Electric pole construction of distribution place is mainly operated by excavation work using auger crane and backhoe. Even though construction quality is affected by electric pole construction method and amount of excavation, construction is operated by workers' convenience in most of construction place. Therefore, in this paper, we analyze and compare effectiveness of electric pole quality using auger crane and backhoe when mechanized excavation through displacement experience of electric pole with ground strength.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.361-373
• /
• 2007

In previous work, an approach based on maximizing the efficiency of an internal combustion engine while ignoring the power conversion efficiency of other powertrain components, such as the electric motor and power battery or ultracapacitor, was implemented in the steady-state optimization of an internal combustion engine for hybrid electric vehicles. In this paper, a novel control algorithm was developed and successfully justified as the basis for maximal power conversion efficiency of overall powertrain components. Results indicated that fuel economy improvement by 3.9% compared with the conventional control algorithm under China urban transient-state driving-cycle conditions. In addition, using the view of the novel control algorithm, maximal power generation of the electric motor can be chosen.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2435-2440
• /
• 2012

본 논문은 기존의 전력절감기(Electric Saver)와 성능과 형상이 다른 전력절감기를 제작하기 위하여 SolidWorks를 활용하여 전력절감기함의 기초설계를 실시하였다. 기초설계를 바탕으로 전력절감기함에 하중이 집중되는 부분을 고려하여 해석하였으며 외함의 내구성을 보장하기 위하여 3차원 유한요소해석 코드인 ANSYS를 이용하여 응력(stress), 변형률(strain), 변형량(deformation)을 구하였으며 이를 제작에 사용된 상세설계에 반영하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.172-174
• /
• 2000

This paper summarizes the feasibility study of HTS power cables in Korea, including the conceptual design of a 154 kV 1000 MVA class HTS cable system, and the relative economic evaluations between conventional and HTS cable systems in Seoul area. According to the results of the economic evaluations, the HTS cable system can reduce the construction work for 168km of underground transmission lines, saving 700 million USD of construction cost in 2010.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.66-71
• /
• 2001

In this work, an ER clutch has been constructed and its characteristics have been evaluated by adapting an electro-rheological fluid(ERF) as an operating medium. ER fluids are suspensions which show an abrupt increase in rheological properties under electric fields. An ER clutch system using ER fluid is a new conception device because an apparent viscosity of ER fluid can be changed by apply an electric field. As a first, Bingham properties of ER fluids are experimentally distilled as a function of electric field. We use the disk type ER clutch in which the ER fluid fills the annular space between a pair of coaxial disk electrodes and experiment results show that the measured revolution per minute was increased with the increase of the electric field. The ER fluid used in the present study consists of weight fraction 35% in zeolite suspended silicone oil.