• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.23-31
• /
• 2012

Variable-flux permanent-magnet machines (VFPM) are of great interest and many different machine topologies have been documented. This paper categorizes VFPM machine topologies with regard to the method of flux variation and further, in the case of hybrid excited machines with field coils, with regard to the location of the excitation sources. The different VFPM machines are reviewed and compared in terms of their torque density, complexity and their ability to vary the flux.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.444-449
• /
• 2010

The generation of electric power using self excited induction generation (SEIG) is a viable option in remote and rural areas where grid electricity is not available. The generated voltage and frequency of these machines, however, varies with varying loads. This characteristic can be resolved either by adjusting the values of the excitation capacitance or by controlling the prime mover speed. Further, in a single-point constant power application, where the machines deliver a fixed amount of power, the electronic load controller (ELC) can be used to switch-in or switch-out a dump load whenever the consumer load decreases or increases respectively. This paper presents a detailed analysis and the design of a microcontroller based SEIG -ELC system intended for stand-alone pico hydro power generation. The simulated performance of the controller is supplemented by experimental results.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.79-83
• /
• 2008

In this paper, we introduced a LIF measurement method and summarized the theoretical side. When an altered wavelength of laser and electric power, lamp applied electric power, we measured the relative density of the metastable state in mercury after observing a laser induced fluorescence signal of 404.8nm and 546.2nm, and confirmed the horizontal distribution of plasma density in the discharge lamp. Due to this generation, the extinction of atoms in a metastable state occurred through collision, ionization, and excitation between plasma particles. The density and distribution of the metastable state depended on the energy and density of plasma particles, intensely. This highlights the importance of measuring density distribution in plasma electric discharge mechanism study. The results confirmed the resonance phenomenon regarding the energy level of atoms along a wavelength. change, and also confirmed that the largest fluorescent signal in 436nm, and that the density of atoms in 546.2nm ($6^3S_1{\to}6^3P_2$) were larger than 404.8nm ($6^3S_1{\to}6^3P_2$). According to the increase of lamp applied electric power, plasma density increased, too. When increased with laser electric power, the LIF signal reached a saturation state in more than 2.6mJ. When partial plasma density distribution along a horizontal axis was measured using the laser induced fluorescence method, the density decreased by recombination away from the center.

• Smart Structures and Systems
• /
• 제9권2호
• /
• pp.189-206
• /
• 2012

This paper focuses on the actuation system combined with a piezoelectric transducer and an electric circuit, which leads to a new insight; the electric actuation system is equivalent to mechanical variable-stiffness actuation systems. By controlling the switch in the circuit, the electric status of the piezoelectric transducer is changed, and consequently a variable-stiffness mechanism is achieved on the electric actuator. This proposed actuator features a shift in the equilibrium point of force, while conventional electrically-induced variable-stiffness actuators feature the variation of the stiffness value. We intensively focus on the equilibrium shift in the actuation system, which has been neglected. The stiffness of the variable-stiffness actuator is periodically modulated by controlling the switch, to suppress the vibration of the system in an open-loop way. It is proved that this electric actuator is equivalent to its mechanical counterpart, and that the electrical version has some practical advantages over the mechanical one. Furthermore, another kind of electrically-induced variable-stiffness actuator, using an energy-recycling mechanism is also discussed from the viewpoint of open-loop vibration control. Extensive numerical simulations provide comprehensive assessment on both electrically-induced variable-stiffness actuators employed for open-loop vibration control.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5452-5459
• /
• 2014

현가장치에 적용 가능한 공진형 선형 발전시스템은 차량이 노면을 주행 시 발생되는 진동에너지를 수집하여 자가 발전기능을 수행하는 시스템으로써, 작은 노면 진동을 증폭하여 큰 발전량을 유도하기 위해 공진 현상을 적용하였다. 시스템의 진동변위 해석을 통해 세 가지의 각기 다른 발전기 아마튜어의 동적 거동을 시뮬레이션하였고, 이를 전자기 유한요소해석을 통해 실제 발전량을 계산 및 비교분석 하였다. 또한, 차량 노면주행 시, 다양한 가진 주파수에 공진현상을 적용하기 위해 발전기 아마튜어의 수를 증가시키는 다자유도 발전기로의 설계 개선을 수행하여 공진 점의 변화를 확인하고 이에 따른 발전량의 변화를 확인하였다. 최종적으로 동일한 제한조건(설치공간)하에서 약 35% 축소된 아마튜어를 설계하여 이전 대비, 1Hz 및 4Hz 가진환경에서 8.5 %, 13.8 % 감소하였고, 15 Hz의 가진 환경에서는 14.7 %의 증가 현상을 확인하였다.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.519-528
• /
• 2019

The unified power quality conditioner (UPQC) is an effective custom power device that is used at the point of common coupling to protect loads from voltage and current-related PQ issues. Currently, most researchers have studied series unit and parallel unit models and an idealized transformer model. However, the interactions of the series and parallel converters in AC-link are difficult to analyze. This study utilizes an equivalent transformer model to accomplish an electric connection of series and parallel converters in the AC-link and to establishes a precise unified mathematical model of the UPQC. The strong coupling interactions of series and parallel units are analyzed, and they show a remarkable dependence on the excitation impedance of transformers. Afterward, a feed-forward decoupling method based on a unified model that contains the uncertainty components of the load impedance is applied. Thus, this study presents an adaptive method to estimate load impedance. Furthermore, simulation and experimental results verify the accuracy of the proposed modeling and decoupling algorithm.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권4호
• /
• pp.157-169
• /
• 2004

Motor & generator operation at widely variable speeds is needed in various applications but hybrid and electric vehicle (HEV) stand out today, as quite a few companies are launching this year their mass production of HEVs. The quest for better starter-generators is far from ended, though. The present review paper unfolds a comparative critical evaluation of various starter-generators and their control for HEV. Induction, interior PM synchronous, transverse-flux PM synchronous, switched reluctance, together with claw-pole and biaxial excitation PM synchronous (BEGA) configurations with their control are all considered in system evaluations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.368-369
• /
• 2003

The recent development of InGaN-based white light emitting diodes (LEDs) has expanded their potential applications in areas such as white electric home appliances, backlight for mobile phone or notebook PC, and indoor lightings. In this lecture, recent researches related to the phosphors for LEDs applications and their luminescent properties were reviewed. PDPs are considered as the most potential flat panel displays with a large-screen size. Phosphors in PDPs directly affect the brightness and lifetime. So, many researchers have tried to improve the luminescence characteristics of the phosphors especially under vacuum ultraviolet (VUV) excitation. We overviewed recent research trends and conclusive achievements for the PDP phosphors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.974-978
• /
• 1991

Electro-pneumatic valve is an electro-mechanical device which converts electric signal into pneumatic flow mu or pressure. A measurement of dynamic response time is very important to evaluate valve performance. Dynamic response time of electro-pneumatic valve has a variation accordance with valve types, operating way and test standard. In this study, automatic measurement system of dynamic response time is composed based on test condition of dynamic response time test standard(CETOP, JIS). Also, in this study test pressure variation characteristics accordance with variation of solenoid excitation power, and we developed dynamic response measurement system enable to compare of and analyze these two characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.361.1-361
• /
• 2002

Coupling adjacent steel frame using elastic dampers fer control of response to low and moderate dynamic event is investigated in this paper. The complex modal superposition method is first used to determine dynamic characteristic, mainly modal damping ratio and modal frequency, of damper linked linear adjacent steel frame for fractical use. Dynamic response of steel frame linked by hydraulic-excitation method. (omitted)