• 한국공간구조학회논문집
• /
• 제6권3호
• /
• pp.87-92
• /
• 2006

This paper is a study on the experiment and elasto-plastic discrete limit analysis of reinforced concrete circular cylindrical shell by the rigid-bodies spring model. In the rigid bodies-spring model, each collapsed part or piece of structures at the limiting state of loading is assumed to behave like rigid bodies. The present author propose new discrete elements for elasto-plastic analysis of cylindrical shell structures, that is, a rectangular-shaped cylindrical element and a rhombus-shaped cylindrical element for the improvement and expansion of this rigid-bodies spring model. In this study, it is proposed how this rigid element-bodies spring model can be applied to the elasto-plastic discrete limit analysis of cylindrical shell structures. Some numerical results of elasto-plastic discrete limit analysis and experimental results such as the curve of load-displacement and the yielding and fracturing pattern of circular cylindrical shell under horizontal load are shown.

• Journal of Welding and Joining
• /
• 제29권4호
• /
• pp.48-53
• /
• 2011

A thermal distortion analysis which takes strains directly as boundary conditions removed barrier of analysis time for the evaluation of welding distortion in a large shell structure like ship block. If the FE analysis time is dramatically reduced, the structure modeling time or the input-value calculating time will become a new issue. On the contrary to this, if the calculation time of analysis input-value is dramatically reduced and its results also are more meaningful, a little longer analysis time could be affirmative. In this study, instead of using inherent strain based on elastic analysis, a thermal strain based on elasto-plastic analysis is used as the boundary condition of weldments in order to evaluate the welding distortion. Here, the thermal strain at the weldment was established by using a stress-strain curve established from the test results. It is possible to automatically recognize the modeling induced-stiffness in the shrinkage direction of welded or heated region. The validity of elasto-plastic thermal distortion analysis was verified through the experiment results with various welding sequence.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.161-173
• /
• 2018

Point bending is often used for cambering and curving structural steel girders. An analytical solution, applicable in the elasto-plastic range only, that relates applied loads to the desired curve was recently developed for inducing horizontal curves using four-point bending. This solution does not account for initial residual stresses and geometric imperfections built-in hot-rolled sections. This paper presents results from a full-scale test on a hot-rolled steel section curved using four-point bending. In parallel, a numerical analysis, accounting for both initial geometric imperfections and initial residual stresses, was carried out. The models were validated against the experimental results and a good agreement for lateral offset and for strain in the elasto-plastic and post-plastic ranges was achieved. The results show that the effect of initial residual stresses on deformation and strain is minimal. Finally, residual stresses due to cold bending calculated from the numerical analysis were assessed and a revised stress value for the service load design of the curved girder is proposed.

• 한국공간구조학회논문집
• /
• 제1권2호
• /
• pp.111-116
• /
• 2001

This paper is a study on the elasto-plastic analysis of reinforced concrete precast large panel connections by rigid element spring model. In the analysis of rigid element spring model, each collapsed part or piece of structures at limiting state of loading is assumed to behave like rigid bodies. The present author propose new elements for the improement and expansion of the rigid element spring model. In this study, it is proposed how the rigid element method can be applied to the elesto-plastic analysis of precat large panel connections. Some numerical results of analytical modeling and load displacement curves are shown.

• 한국정밀공학회지
• /
• 제6권3호
• /
• pp.90-99
• /
• 1989

In this study, J-integral values obtained by various methods, i.e, R-Curve, Unloading Compliance, Strectched Zone Width [SZW], and Acoustic Emission [AE] methods are investigated. Elasto-plastic fracture toughness [$J_IC$] estimations by R-curve method are overestimated than those by SZW method, and those by unloading compliance method is around middle value of them. And the difference between them is little. The $J_IC$ value by AE method was almost agreed with that by SZW, and then proved to be useful. Crack propagation mechanism on fractography is a stable ductile fracture. For the identification of ductile fracture, both fractography analysis and AE method were applied to estimate the characteristics more precisely.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 1997

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.323-359
• /
• 2015

This paper presents an elasto-plastic model for determination of the ground response curve of a circular underwater tunnel excavated in elastic-strain softening rock mass compatible with a nonlinear Hoek-Brown yield criterion. The finite difference method (FDM) was used to propose a new solution to calculate pore water pressure, stress, and strain distributions on periphery of circular tunnels in axisymmetric and plain strain conditions. In the proposed solution, a modified non-radial flow pattern, for the hydraulic analysis, is utilized. To evaluate the effect of gravitational loads and variations of pore water pressure, the equations concerning different directions around the tunnel (crown, wall, and floor) are derived. Regarding the strain-softening behavior of the rock mass, the stepwise method is executed for the plastic zone in which parameters of strength, dilatancy, stresses, strains, and deformation are different from their elasto-plastic boundary values as compared to the tunnel boundary values. Besides, the analytical equations are developed for the elastic zone. The accuracy and application of the proposed method is demonstrated by a number of examples. The results present the effects of seepage body forces, gravitational loads and dilatancy angle on ground response curve appropriately.

• 한국추진공학회지
• /
• 제16권3호
• /
• pp.49-56
• /
• 2012

파열판은 고압장치에서 안전장치로써 사용하고 있으며, 추진기관에서는 파열을 임의로 제어하기 위한 장치로써 사용한다. 본 논문은 파열판의 파열압력 시험결과와 유한요소해석 결과를 비교하기 위한 것이다. 본 논문에서는 AISI 316L을 이용하여 제작한 파열판의 파열시험을 수행하였으며, 탄소성 물성치와 진 응력-변형률 관계의 다양한 가정을 이용하여 파열판의 파열압력을 계산하였다. 파열시험과 탄소성해석 결과를 통하여 파열판의 크기에 대한 파열압력의 변화를 확인하였다. 시험과 유한요소해석을 통해 파열압력은 파열판의 크기에 의존하며, 탄소성해석을 수행한 결과 다중 선형 응력-변형률 선도만이 의미있는 예측치를 계산할 수 있었다. 파열시험을 통하여 파열판의 크기에 따라 파열위치가 다르다는 것을 확인할 수 있었다. 시험과 해석 결과는 파열판의 크기 변화를 통하여 파열판의 파열압력을 제어하기 위해 사용할 수 있다.

• 한국지반공학회지:지반
• /
• 제14권6호
• /
• pp.81-92
• /
• 1998

앵커로 지지된 토류벽의 거동 해석기법에는 한계평형이론해석 (Limit Equilibrium Analysis), 유한요소해석(Finite Element Analysis), 그리고 탄소성보 해석법(Beam on Elasto-Plastic Foundation) 등이 있다. 이 중에서 탄소성보 해석법은 토류벽체의 변위, 휨모멘트, 토압분포 등을 구할 수 있고 유한요소해석에 비해 입력자료가 간편한 장점으로 인하여 널리 사용되어 왔다 (Haliburton. 1968.; Pfister등.. 1982: Briaud와 김 낙경, 1998), 탄소성보 해석법은 토류벽체를 탄성보로 모델링하고 지반을 탄소성 토압-변위 곡선 (Elasto-Plastic p-y Curve)으로 표시되는 스프링으로 모델링 하여 지반-토류벽 상호작용을 해석하는 기법이다. 그러므로 앵커토류벽의 탄소성보 해석법은 실제 거동을 모사할 수 있는 토압-변위 곡선의 구성 여부에 따라 그 해석 결과가 좌우된다. 본 논문에서는 미 국립토질시험장(U.S. National Geotechnical experimentation Site)에서 시공된 앵커토류벽의 변위,휨모멘트 계측자료로부터 Cubic Spline 함수를 이용하여 시공단계별로 토류벽에 작용하는 토압을 산정함으로서 토압-변위 곡선을 구성하였다. 구성된 토압-변위 곡선을 이용하여 탄소성 보해석을 실시하여 실측된 변위 및 휨모멘트와 비교함으로서 실험적인 토압-변위 곡선을 평가하고 시공단계를 적절히 고려할 수 있는 탄소성보 해석기법을 제안하였다.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.69-75
• /
• 2000

The object of the research is to estimate for pearlite structure of quenched carbon steels. The effects of temperature on physical properties metallic structures and the latent heat by phase transformation were considered. In this study a set of constitutive equations relevant to the analysis of thermo-elasto plastic materials with pearlite phase transformation during quenching process way presented on the basis of continuum thermo-dynamics. The iso-thermal transformation curve of the SM50C was formlated by cubic spline curve. The formulated equations of evolution in pearlite transformation was used for structure analysis. The volume fraction of pearlite was obtained from the results of calculated metallic structure by Finite element equation.