• Structural Engineering and Mechanics
• /
• v.61 no.1
• /
• pp.15-29
• /
• 2017

The recently introduced index Ratio Of Torsion (ROT) quantifies the base shear amplification due to torsional effects on shear cantilever types of building structures. In this work, a theoretical proof based on the theory of elasticity is provided, depicting that the ratio of torsion (ROT) is independent of the forces acting on the structure, although its definition stems from the shear forces. This is a particular attribute of other design and evaluation criteria against torsion such as center of rigidity and center of strength. In the case of ROT, this evidence could be considered as inconsistent, as ROT is a function solely of the forces acting on structural members, nevertheless it is proven to be independent of them. As ROT is the amplification of the shear forces due to in-plan irregularities, this work depicts that this increase of internal shear forces rely only on the structural topology. Moreover, a numerical verification of this theoretical finding was accomplished, using linear statistics interpretation and nonlinear neural networks simulation for an adequate database of structures.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.2
• /
• pp.55-64
• /
• 1990

Soybean fatty acid, the largest byproduct in the production of soybean oil, was formulated for hand cream, oil in water emulsion base, to improve the suppleness and elasticity of skin. The stability of emulsion observed by a macroscopic method was used as a characteristic index for deciding an optimum formula of hand creams. The optimum formula of the most stable hand cream was obtained from polynomial regression equation, contour graphs and partial derivative graphs. The values of soybean fatty acid and stearyl alcohol in the obtained optimum formula were 9.75 and 14.75 w/w%, respectively, and sodium lauryl sulfate was not needed. Experimental value for the stability of hand cream prepared according to the optimum formula was 76,14 days, and the prediction value by computation method was 73.25 days. From the results of accelerated tests by elevated temperature, the stability of hand cream by optimum formula was 1.7 year at room temperature $(25^{\circ}C)$. The hand cream containing soybean fatty acid was found to be free of primary irritant substance to the skin by Draize technique.

• Advances in nano research
• /
• v.5 no.2
• /
• pp.141-169
• /
• 2017

In this paper, a nanobeam connected to a rotating molecular hub is considered. The vibration behavior of rotating functionally graded nanobeam based on Eringen's nonlocal theory and Euler-Bernoulli beam model is investigated. Furthermore, axial preload and porosity effect is studied. It is supposed that the material attributes of the functionally graded porous nanobeam, varies continuously in the thickness direction according to the power law model considering the even distribution of porosities. Porosity at the nanoscopic length scale can affect on the rotating functionally graded nanobeams dynamics. The equations of motion and the associated boundary conditions are derived through the Hamilton's principle and generalized differential quadrature method (GDQM) is utilized to solve the equations. In this paper, the influences of some parameters such as functionally graded power (FG-index), porosity parameter, axial preload, nonlocal parameter and angular velocity on natural frequencies of rotating nanobeams with pure ceramic, pure metal and functionally graded materials are examined and some comparisons about the influence of various parameters on the natural frequencies corresponding to the simply-simply, simplyclamped, clamped-clamped boundary conditions are carried out.

• Journal of Agricultural Extension & Community Development
• /
• v.28 no.3
• /
• pp.153-165
• /
• 2021

This study aims to analyze the difference in production elasticity based on the types of agricultural labor input regarding its qualitative difference in Jeju mandarin production. To estimate the production function of qualityadjusted labor, we have set up a Quality-Adjusted Index based on the market wage of the agricultural field. We have conducted a multiple regression analysis of the newly estimated labor inputs using the Ordinary Least Squares regression. Results show that the production efficiency of aggregate total labor hours (quality-unadjusted labor input) is overestimated compared to quality-adjusted labor with qualitative labor homogeneity. Moreover, by analyzing household labor and employment labor, we have observed that the marginal productivity of household labor exceeds that of employment labor. In conclusion, this study verifies that securing labor input homogeneity is crucial for analyzing agricultural labor hours' economic efficiency accurately.

• Structural Engineering and Mechanics
• /
• v.68 no.6
• /
• pp.721-733
• /
• 2018

The modal frequency responses of functionally graded (FG) sandwich doubly curved shell panels are investigated using a higher-order finite element formulation. The system of equations of the panel structure derived using Hamilton's principle for the evaluation of natural frequencies. The present shell panel model is discretised using the isoparametric Lagrangian element (nine nodes and nine degrees of freedom per node). An in-house MATLAB code is prepared using higher-order kinematics in association with the finite element scheme for the calculation of modal values. The stability of the opted numerical vibration frequency solutions for the various shell geometries i.e., single and doubly curved FG sandwich structure are proven via the convergence test. Further, close conformance of the finite element frequency solutions for the FG sandwich structures is found when compared with the published theoretical predictions (numerical, analytical and 3D elasticity solutions). Subsequently, appropriate numerical examples are solved pertaining to various design factors (curvature ratio, core-face thickness ratio, aspect ratio, support conditions, power-law index and sandwich symmetry type) those have the significant influence on the free vibration modal data of the FG sandwich curved structure.

• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.293-309
• /
• 2022

Accurate design models for predicting the shear resistance of headed studs in solid concrete slabs are essential for obtaining economical and safe steel-concrete composite structures. In this study, symbolic regression with genetic programming (GPSR) was applied to experimental data to formulate new descriptive equations for predicting the shear resistance of studs in solid slabs using both normal and lightweight concrete. The obtained GPSR-based nominal resistance equations demonstrated good agreement with the test results. The equations indicate that the stud shear resistance is insensitive to the secant modulus of elasticity of concrete, which has been included in many international standards following the pioneering work of Ollgaard et al. In contrast, it increases when the stud height-to-diameter ratio increases, which is not reflected by the design models in the current international standards. The nominal resistance equations were subsequently refined for use in design from reliability analyses to ensure that the target reliability index required by the Eurocodes was achieved. Resistance factors for the developed equations were also determined following US design practice. The stud shear resistance predicted by the proposed models was compared with the predictions from 13 existing models. The accuracy of the developed models exceeds the accuracy of the existing equations. The proposed models produce predictions that can be used with confidence in design, while providing significantly higher stud resistances for certain combinations of variables than those computed with the existing equations given by many standards.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.69-78
• /
• 2022

A high-resolution camera is a precise optical system. Its vibrations during transportation and launch, together with changes in temperature and gravity field in orbit, lead to different degrees of defocus of the camera. Thermal refocusing is one of the solutions to the problems related to in-orbit defocusing, but there are few relevant thermal refocusing mathematical models for systematic analysis and research. Therefore, to further research thermal refocusing systems by using the development of a high-resolution micro-nano satellite (CX6-02) super-resolution camera as an example, we established a thermal refocusing mathematical model based on the thermal elasticity theory on the basis of the secondary mirror position. The detailed design of the thermal refocusing system was carried out under the guidance of the mathematical model. Through optical-mechanical-thermal integration analysis and Zernike polynomial calculation, we found that the data error obtained was about 1%, and deformation in the secondary mirror surface conformed to the optical index, indicating the accuracy and reliability of the thermal refocusing mathematical model. In the final ground test, the thermal vacuum experimental verification data and in-orbit imaging results showed that the thermal refocusing system is consistent with the experimental data, and the performance is stable, which provides theoretical and technical support for the future development of a thermal refocusing space camera.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.22-25
• /
• 2004

Purpose: The heel fat pad has a unique structure that is important for its shock absorbing function. Loss of elasticity and change in the thickness of the heel pad have been suggested as cause of heel pain. The present study shows the relationship between the thickness of heel fat pad and age, sex, obesity and plantar heel pain. Materials and Methods: A study of heel pad thickness using plain lateral radiographs, unloaded by body weight, was carried out on 66 patients with plantar heel pain and 326 normal subjects. The population was divided into two or three groups according to their age, sex, body mass index, and the presence of symptom. We evaluated the differences in heel pad thickness between groups, and the relationship between BMI and Sex and Age was also determined, using statistically analytic method by SPSS version 10.1 program. Results: Heel pad thickness was greater in the subject over 40 years old (p<0.001), and in the overweight (p<0.001), and male heel pad was thicker than female (p<0.001). But there was no statistically significant difference for heel pad thickness between normal subject and plantar heel pain group. Conclusion: In this study, we found that there is a relationship between heel pad thickness and age, sex, and obesity. But we could not show that the difference of heel pad thickness is contributing factor to plantar heel pain. Although it could not be proved statistically, we believe that a change of heel pad thickness play a role in the development of heel pain. So we are planning to assess a relationship of heel pad elasticity and thickness and plantar heel pain again with prospective study method on the basis of the results of this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.562-570
• /
• 2018

New physical properties of polymer materials were obtained by blending two or three different type of polymers. TPE is used widely in the display, automotive and electronics industries. Consumers have sought emotionally more sensitive and advanced interior automotive parts. A polymer with high foamibility (Ed note: Please check this.) and flowability would be more plausible. TPE composed of foam is a good polymer material to satisfy these trends. In this research, two different TPE were tested, focusing on foamibility and flowability. Two type of TPE were prepared. The first was blended Homo-PP, oil and SEBS. The second was Co-PP, oil and SEBS. The blending temperatures were $180^{\circ}C$, $190^{\circ}C$, and $260^{\circ}C$(second one). The blending speed was 50rpm and blending time was 5 min. The MI of the blended material was affected by the MI of PP and not affected by the blending temperature. The hardness and tensile elasticity were less affected by the MI of PP and blending temperature. The hardness and tensile elasticity were lower at a higher SEBS/Oil content ratio. The soft touch feel was higher with high SEBS/Oil contents. The IPN (Interpenentration polymer network) structure was observed by dissolving the SEBS/Oil layer in xylene. Strain-hardening phenomena also was observed. TPE behaves in a rubber and foamed closed-cell improved its stability.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.195-209
• /
• 2018

In this study, the characteristics of various raw hairs used for traditional Korean brushes were examined; further, the characteristics and deterioration patterns of Korean, Chinese, and Japanese brushes were compared, with a quantitative evaluation to assess the brush performance. The tensile strength was generally found to be higher with a greater fiber thickness. Among the hairs examined, the back and flank hair of goat was more damaged than that in other parts, and the tensile strength was low. Higher elasticity of the brush made with hair of high cysteine content was measured. Owing to deterioration by use of the brushes, artificial drying brushes had a higher yellowness index and lower tensile strength than natural drying brushes. Further, it was confirmed that brushes with good absorbency exhibited good consistency, but not good elasticity. Thus, the performance of the brush can be influenced by the kind of material used and the brush usage pattern. In addition, it is possible to identify the material science characteristics of brushes which have been produced only by experience; therefore, the results of this study could provide basic data for manufacturing brushes employed in conservation treatment, in the future.