• 한국지반공학회지:지반
• /
• 제11권1호
• /
• pp.113-126
• /
• 1995

점성토의 변형특성을 연구하기 위하여 공진주(RC)시험과 비틀전단(75)시험을 저변형률 및 중간 변형률하에서 실시하여 변형률의 크기,진동주파수,하중반복회수의 영향을 살펴보았다. 소 성지수가 이들의 영향을 평가하는데 중요한 변수임을 알 수 있었다. 실험에 사용된 시료로는 불 교란 실트 및 점토와 실험실에서 다져진 노상토를 사용하였다. 선형한계변형률이하에서 전단탄 성계수는 하중반복회수와 변형률의 크기에 영향을 받지 않았으며, RC시험에서 얻은 최소감소비가 1.1%에서 1.7%영역에서 존재하였다. 점성토의 선형한계변형률은 구속압과 소성지수에 따라 증가하였으며 사질토와 비교하여 넘은 선형영역을 보였다. 반복한계변형률이상의 변형률하에서는 전단탄성계수는 하중반복회수에 따라 감소하였지만 감쇠비는 영향을 받지 않았다. 진동주파수의 영향에 의해 RC시험에서 얻은 점성토의 전단탄성계수와 감쇠비는 RC시험결과보다 컸다. 전단탄성계수는 진동주파수의 대수증가에 따라 선형적으로 증가하였고 감쇠비의 경우 2Hz이하의 저주파수영역에서는 영향을 받지 않았다.

• 한국지반환경공학회 논문집
• /
• 제14권2호
• /
• pp.51-55
• /
• 2013

연약지반을 개량하기 위한 심층혼합처리공법과 같은 다양한 공법은 지반보강을 위하여 그라우트를 광범위하게 사용하고 있다. 반복하중 및 동하중을 받는 지반-구조물계의 설계에 사용되는 중요한 동적변수는 사질토 및 화강풍화토, 암시편에 관하여 많이 연구 발표되었다. 하지만 그라우트로 보강된 지반에 대한 내진설계 연구는 미비한 실정이다. 이에 본 연구에서는 공진주시험기를 이용하여 점성토와 보통 포틀랜드 시멘트의 함수비와 그라우트 주입률의 변화에 따른 전단변형률과 전단탄성계수의 상관관계를 Ramberg-Osgood Model로 정규화하여 비교 분석하였다. 그 결과 동적계수는 함수비와 그라우트 주입율에 의해 영향을 받는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.495-510
• /
• 2015

Free vibration of non-uniform embedded nanoplates based on classical (Kirchhoff's) plate theory in conjunction with nonlocal elasticity theory has been studied. The nanoplate is assumed to be rested on two-parameter Winkler-Pasternak elastic foundation. Non-uniform material properties of nanoplates have been considered by taking linear as well as quadratic variations of Young's modulus and density along the space coordinates. Detailed analysis has been reported for all possible casesof such variations. Trial functions denoting transverse deflection of the plate are expressed in simple algebraic polynomial forms. Application of the present method converts the problem into generalised eigen value problem. The study aims to investigate the effects of non-uniform parameter, elastic foundation, nonlocal parameter, boundary condition, aspect ratio and length of nanoplates on the frequency parameters. Three-dimensional mode shapes for some of the boundary conditions have also been illustrated. One may note that present method is easier to handle any sets of boundary conditions at the edges.

• 대한기계학회논문집
• /
• 제5권2호
• /
• pp.122-130
• /
• 1981

Equation of equilibrium is derived and solved for an infinite isotropic solid under applied hydrostatic stress which is uniform at large distance, and disturbed by a spherical precipitate which has isotropoc elastic constants dirrerent form those of the matrix. A linear strain hardening behavior of the matrix is assumed, and an elasto-plastic sloution is obtained. The difference of the total strain energy stored inthe infinite solid with and without a precipitate is computed, and compared with that for purely elastic case. Finally the effect of the ratio of the bulk modulus of the precipitate to that of the matrix and the effct of linear strain hardening rate on the plastic zone size and the energy difference are discussed.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.59-64
• /
• 2001

Even though there is a guideline for the required strength of pipe support in inspection, it does not mean the nominal strength which can be used for the form work design. And, Concrete Specification defines that the pipe support should be designed according to the steel design guidelines but the design details are not provided, such as buckling length and the sectional modulus, etc. For the better prediction of strength of pipe support, the slenderness ratio of support which reflects the boundary condition should be considered. In this paper, the elastic buckling formula based on the slenderness is derived. The formula contains the strength reduction factor that consider the strength deduction caused by initial lateral deformation and is 0.65 consistently regardless of boundary conditions. And the coefficient of effective buckling length is calculated from the experiment.

• Smart Structures and Systems
• /
• 제5권5호
• /
• pp.547-564
• /
• 2009

Based on the theory of piezoelasticity, an analytical solution for a typical multilayer piezoelectric composite cantilever is obtained by the Airy function method. The piezoelectric cantilever may consist of any number of layers. Moreover, the material and thickness for different layers may be different. The solution obtained in the present paper is concise and can be easily applied for the bending analysis of multilayer piezoelectric actuators considering the effect of bonding layers and electrodes. At last, a comprehensive parametric study is conducted to show the influence of electromechanical coupling (EMC), the number of piezoelectric layers, the elastic modulus of elastic layer and the thickness ratio on the bending behavior of actuators. Some interesting results for the design of multilayer piezoelectric actuators are presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.69-75
• /
• 1995

The deformation behavior of stainless steel-clad aluminum sheet metals under uniaxial tension has been investigated. The differences in mechanical properties such as elastic modulus, flow stress and plastic strain ratio, of component layers of the composite sheet gave rise to warping of the tensile specimens. The warping has been analyzed by FEM and the total force and momentum equilibria. The analyzed radii of curvature of the warped specimens were smaller than the measured data possibly due to elastic recovery during unloading. The differences in mechanical properties may also give rise to transverse stresses in the component layers. The transverse stresses have been analyzed on the assumption of isostrain and by the FEM in which the warping has been taken into account. The transverse stresses calculated by the FEM were lower than those by the isostrain hypothesis due to stress relaxation by the warping and turned out to be negligible compared with the longitudinal stresses. Consequently, the flow stresses of the composite sheets follow the rule of mixtures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.834-839
• /
• 2003

Previous research has been conducted on an ultrasonic wave reflection method that utilizes a steel plate embedded in the concrete to measure the reflection loss of shear waves at the steel-concrete interface. The reflection loss has been shown to have a linear relationship to compressive strength at early ages. The presented investigations continue this research by examining the fundamental relationship between the reflection loss, measured with shear waves, and the hydration kinetics of Portland cement mortar, represented by dynamic elastic moduli, compressive strength and degree of hydration. Dynamic elastic moduli are measured by fundamental resonant frequency and degree of hydration is determined by thermogravimetric analysis. The water/cement ratio was varied for the tested mixture compositions. The results presented herein show that compressive strength, dynamic shear modulus and degree of hydration have a linear relationship to the reflection loss for the tested mortars at early ages.

• 대한기계학회논문집
• /
• 제6권3호
• /
• pp.204-210
• /
• 1982

The mechanical behaviors of an elastic body containing another materials are studied with the statistical method since they are generally distributed at random in size, orientation, and position. As the basis of this research, the size, the shape, and the ratio of volume for another material assumed to be constant, and only the positions of another material are changed randomly. The stress intensity factor, the compliance, and the modulus of elasticity are investigated in two-dimensional state by using the Monte Carlo Method and the Finite Element Method. The methodology of the simulation analysis for the mechanical behavior of such material is also proposed.

• 공업화학
• /
• 제10권3호
• /
• pp.419-426
• /
• 1999

가황고무의 가황반응에 대하여 가황시스템 및 온도, 보강성충전제 첨가량 변화에 의한 반응속도상수 및 활성화에너지, 가교밀도 및 탄성상수, 가황특성 ($t_5,\;t_{90}$), 고무보강성 및 내마모성을 고찰하였다. 반응속도상수는 보강성충전제 첨가량, 가황시스템 및 가황반응온도에 대한 의존성이 크게 나타났으며, 반응온도에 따라 지수적으로 증가하였다. 활성화에너지는 가황시스템중 촉진제에 대한 황 비율이 높은 가황시스템에서 가장 작게 나타났으며, 보강성충전제 첨가량이 적을수록 작게 나타났다. 카본블랙 첨가량 변화는 고무보강성 및 내마모성에 직접적으로 영향을 미치고 있으나, 가황시스템 변화는 각기 다른 영향이 나타났다. 카본블랙 첨가량이 증가하면 모듈러스가 증가하고, 내마모성이 향상되며, 스코치시간이 짧아졌으나, 가교밀도 및 탄생상수는 감소하였다. 높은 가교밀도 및 탄성상수는 카본블랙 첨가량에 관계없이 촉진제에 대한 황 비율 0.73 (${\fallingdotseq}1$)에서 나타났으며, 스코치시간 ($t_5$)은 촉진제에 대한 황 비율 변화에 거의 영향을 받지 않는 것으로 나타났다. 빠른 최적가황시간 ($t_{90}$) 역시 촉진재에 대한 황 비율이 1에 가까운 조건 (=0.73)에서 나타났다. 가황조건별 배합고무의 등가 가황곡선계수는 카본블랙 첨가량에 관계없이 CC 시스템에 대해서는 0.96, SEC 및 EC 시스템에 대해서는 0.74로 나타났다. 한편 가황고무의 마모된 부피는 부과된 하중이 증가함에 따라 지수적으로 증가하였다.