• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.1
• /
• pp.21-29
• /
• 2015

A steady-state controllable M/G/1 queueing model operating under the {T:Min(T,N)} policy is considered where the {T:Min(T,N)} policy is defined as the next busy period will be initiated either after T time units elapsed from the end of the previous busy period if at least one customer arrives at the system during that time period, or after T time units elapsed without a customer' arrival, the time instant when Nth customer arrives at the system or T time units elapsed with at least one customer arrives at the system whichever comes first. After deriving the necessary system characteristics including the expected number of customers in the system, the expected length of busy period and so on, the total expected cost function per unit time for the system operation is constructed to determine the optimal operating policy. To do so, the cost elements associated with such system characteristics including the customers' waiting cost in the system and the server's removal and activating cost are defined. Then, procedures to determine the optimal values of the decision variables included in the operating policy are provided based on minimizing the total expected cost function per unit time to operate the queueing system under considerations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.25-28
• /
• 2007

In this study we measured the changes according to time respectively on the basis of 0, 30, 60 and 90 minutes, taking into consideration the decline in fluidity of concrete according to elapsed time to analyze manufacturing capability of batcher plant according to elapsed time of ready-mixed concrete manufactured in batcher plant, and offer basic data for mixture design of ultra-high strength concrete. The proportion of water-binder was 23.55, water content was 160kg/m3, proportion of replacement of crushed sand was 0, 20 and 40% at 3 level, and we applied to the same condition of triaxial component using blast furnace slag powder and silica fume as admixture. And to meet the demand of certain fluidity, we measured respectively on property before and after hardening of ultra-high strength concrete using superplasticizer. As a result of experiment, before hardening of ultra-high strength concrete showed the best fluidity in conditions of crushed sand replacement rates of 20% and superplasticizer composition of 1.95%, but it appeared that fluidity drops as time goes by in the same composition condition. And it appeared that when it comes to hardened, the changes of compression strength according to elapsed time by crushed sand replacement rates were within 1MPa. Therefore, it turned out that the difference of strength according to elapsed time was low and compression strength of 280dys in composition mentioned above appeared highly as 88MPa.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.314-318
• /
• 2006

This study is to analyze the intensity of welding part by simulating the dynamic procedure during the fracture of plates with spot welding. The upper and tower plates attached with spot welding can be seen to fall apart at the elapsed time of 0.64 ms after the upper plate is stretched from the lower plate. The maximum von Mises stress is shown at the welding part in the mid of upper and lower plates. The internal energy decreases largely and the kinetic energy increases suddenly near the elapsed time of 0.64 ms when welding part breaks down. The sliding energy decreases with step-by-step style as the time elapses. The value of this energy becomes 0 at the elapsed time of 0.2 ms and on the contrary, two plates stick each other as this value becomes a minus after this time.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.47-52
• /
• 2000

This study was carried out to analyze the effects of elapsed years and physical properties on fill-slope alignment of forest road. For the study, 21 forest roads in Puy$\check{o}$-gun and Asan-shi of Chungchungnam-do were selected and fifteen factors that might influence on fill-slope alignment were analyzed. The major forms of alignment of the fill-slope in the time of construction were concave and compound. But, with the elapsed years, the concave and compound forms have decreased and linear and convex forms have increased. And fill-slope alignment was strongly related with fill-slope distance, fill-slope gradient and ground gradient among the physical properties.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.259-265
• /
• 2002

In this study, various kind of onion herb kimchi differing in herb contents were prepared. Sensory evaluation indicated that rosemary was best of all for the tested herbs. By the sensory analysis, it seemed that 0.5% addition of fresh herb powder for onion kimchi was most preferable and 2% addition was not acceptable. Hot spice of onion was remained when kimchi was prepared but it disappeared as storage time elapsed. According to texture analysis, hardness decreased as storage time elapsed for onion kimchi without herb, but the degree was mitigated for onion herb kimchi.

• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.71-79
• /
• 2003

After the juvenile octopus individuals being discharged, it is hard to separately capture them because they attach strongly to the wall of the aquarium by the suckers on the arms. Therefore, anaesthetics (MS-222 or lidocaine-HCl) are usually used for capture from attachment. The anaesthetized time of the octopus by lidocaine-HCl was more faster 1.6 to 4.5 times under 200 ppm and 6.0 to 6.5 times in 300 to 500 ppm than those in MS-222. In the anaesthetized and recovery rates (%) by the exposed time, the juvenile octopuses were anesthetized by lower concentrations of lidocaine-HCl within the short time, and rapidly recovered from anesthesia. In the secondary anesthesia of the juvenile octopuses exposed with lidocaine-HCl by the elapsed time after the primary anesthesia, the anesthetized time was later in case of lower concentrations and long elapsed times, However, the anesthetized time was faster when their concentrations were higher and the elapsed time after anesthesia were shorter. Recovery from the secondary anesthesia was faster when the elapsed time was long in lower concentration, and was later when the elapsed time was shorter. In case of Octopus ocellatus, anaesthetic effects by lidocaine-HCl concentrations were better than those of MS-222. Doses of lidocaine-HCl and critical time for works at the indoor laboratory were proper in concentration of 100 ppm within 15 min.

• Journal of Oral Medicine and Pain
• /
• v.12 no.1
• /
• pp.27-40
• /
• 1987

When the men die, uniform changes progress. Many investigators have studied about the time after death, but it's very difficult to measure the time elapsed since death, particularly in highly decomposed or probably skeletonized bodies. But the teeth are very stable to the changes of physical and chemical properties and their changes are very slow. At this point of view, the author studied this theme as one of the pioneers in our country. In this study, the author observed the degree of the dentinal expansion and the crack of enamel and cementum of the teeth which had been extracted from December, 1983 to September, 1987. The teeth were extracted from the male and female who was 18 to 85 year old. The results are followed; 1. The degree of dentinal expansion increased rapidly until 7 months with high degree and then decreased slowly. 2. The equation of regression for representing x as the degree of the dentinal expansion and y as the time elapsed since death, is y = 29.43-1.13x (p<0.05) 3. The crack of the enamel surface seemed to begin at 1 year from extraction and to increase apparently before or after 20 months. 4. The crack of the cementum began at 3 months from extraction and dendrite crack began at 16 months from extraction. After this, the crack increase continuously and the rate of cracking were more rapid as compared with that of enamel. 5. It seems to be useful to measure the time elapsed since death using the degree of dentinal expansion and the crack of enamel and cementum, particularly in the old bodies after death.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.75-81
• /
• 2017

Objective: The purpose of this study was to compare and analyze the kinematic variables and electromyography (EMG) findings that change with varying characteristics of crouch start and feedback provision, and to provide the fundamental data for record improvement in 400 mH. Method: Four short-distance runners participated in the experiment. The analyzed variables were elapsed time per interval, stride length, and muscle activities in three lower limb muscles. These variables were analyzed by using Kwon3d XP and Noraxon Myoresearch. The participants were subjected to three conditions, including two conditions that relate to the thrusting foot on the rear block and another condition pertinent to feedback provision. Results: In terms of a one-step interval, the elapsed time in condition A was longer than that in condition B, and the one after the feedback was the longest. The stride length of a one-step interval was the longest in condition A. The stride length of a two-step interval was the shortest in condition A. The muscle activity during a one-step interval showed differences in vastus medialis and medial gastrocnemius, with condition A being the highest. Conclusion: When the non-dominant left foot was located at the back, negative results were observed in terms of elapsed time and stride length. Moreover, an imbalance in muscle activity was observed between the left and right feet when the left foot was placed at the back. As a result, significant differences in elapsed time, stride length, and muscle activity were observed depending on the foot placed on the rear block. In conclusion, we identified the characteristics of crouch start in 400 mH, and a specialized program must be suggested.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.85-93
• /
• 1988

This laboratory study was carried out in order to produce fundamental data for analyzing salt movement and desalinization effects, using samples of silt loam soil collected in Gyehwado and Daeho reclaimed tidelans, and samples of silty clay loam soil collected in Kimie tideland. Desalinization experiments with gypsum treatment were performed to analyze changes of the hydraulicc conductivity with changes of the soil property and the salt concentration during the desalinization of reclaimed tideland soils by leaching through the subsufface drainage, and correlations between factors infl uencing the reclamation of salt affected soils were analyzed by the statistical method. The results were summarized as follows: 1. The reclaimed tideland soils used in this study were saline-sodic soils with the high exchangeable sodium percentage and the high electrical conductivity. 2. Changes of the hydraulic conductivity with the amount of leaching water and the leaching time elapsed were affected by the amount of gypsum except exchangeable sodium and clay contents. The regression equation between the depth of water leached per unit depth of soil (Dw / Ds : X) or the square root of the leaching time elapsed (T $^1$ $^2$ : X) and the relative hydraulic conductivity (HCr:Y) could be expressed in Y=a . bx. 3. The more exchangeable sodium and clay contents regardless of the amount of gypsum, the more the leaching time was required until a given volume of water was leached through the soil profile. The regression analysis showed that the relationship between the depth of water leached per unit depth of soil(Dw /Ds:X) and the square root of the leaching time elapsed(T$^1$$^2$ :Y) could be described by Y=a . Xb. 4. The hydraulic conductivity was influenced to a major degree by the salt concentration provided that the electrical conductivity was below 10 mmhos / cm during the desalinization of reclaimed tideland soils. The regression equation between the relative electrical conductivity ( ECr : X) and the relative hydraulic conductivity (HCr:Y) could be expressed in Y=a + b . X-$^1$. 5. In conclusion, the hydraulic conductivity, leaching requirements and the leaching time elapsed can be estimated when the salt concentration decreases to a certain level during the desalinization of reclaimed tidelands, and the results may be applied to the analysis of salt movement and desalinization effects.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.92-97
• /
• 2009

Two conventional speed detection methods (Elapsed-time method and Pulse-count method) are analyzed and compared for a high speed motor with digital tacho pulse with non-uniformity. In general, the elapsed-time method usually has better performance than a pulse-count method in case sufficiently high speed clock is used to measure the time difference. But if a tacho pulse non-uniformity exists in the reaction wheel - most of reaction wheel has a certain amount of non-uniformity - the accuracy of the elapsed-time method is degraded significantly. Thus the performance degradation is analyzed with respect to the level of non-uniformity of tacho pulse distribution and an allowable bound is suggested.