• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.66-71
• /
• 2008

The data of the deformation and the stress according to time are studied at upper model of press and lower model of the blanking plate applied by press with the width, length and height of 0.4 m and 0.6 m respectively. The press is pushing downward on the plate fixed at the lower floor. These data are compared and investigated through this study. By using these results, there is the maximum deformation at 4 corners in the lower plate model of aluminium alloy fixed at lower floor. This deformation incase of elapsed time of 0.6 second becomes 4 times as much as in case of elapsed time of 0.2 second. The quantity of deformation at the lower plate model becomes more than at the upper press model to the extent of 10%. At the lower plate model of aluminium alloy, there is the maximum Von-Mises equivalent stress at 4 corners and both sides of middle area on the lower plate model of aluminium alloy. This stress in case of elapsed time of 0.6 second becomes 6 times as much as in case of elapsed time of 0.2 second. The Von-Mises equivalent stress of lower plate model becomes 2 times as much as that of upper press mode.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.4
• /
• pp.269-275
• /
• 2022

In ideal configuration, elapsed-time method can measure the exact reaction wheel speed. But in real configuration, the speed measurement error exists due to tacho pulse non-uniformity. In this research, we study the method which overcome the non-uniformity effects. First, we introduce the method which spin the wheel at the specific speed and measure the non-uniformity. Then, we propose the real-time measurement error correction method which uses the obtained non-uniformity information. This method calculate the speed candidates from the elapsed-time method's counts and non-uniformity information, and choose the closest speed to the real speed. Through simulation, we show that proposed method measure the exact speed regardless of non-uniformity, and fast wheel speed control is possible.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.39-47
• /
• 1981

For purpose of investigation the proper paddy field condition in performance of rice transplanter according to the various elapsed times (0.5, 1, 1.5, 2 days) after puddling and plowing (12, 15, 18 cm depth), this experiment was carried out on the paddy field located in Chil Am Dong, Jin Ju City, from April to May in 1980. The results are summarized as follows; 1. The practical working power for the elapsed time 0.5 days and plowing depth 18cm was about 0.8 ps, which was the highest among the plots, so the power out-put(2.5~3.5 p.s) of these engines are considered to be enough for the transplanting under these field conditions. 2. The percentage of slip increased proportional1y to the plowing depth and decreased proportionally to the elapsed time after puddling, and the highest and lowest percentages of slip were 42.5% in elapsed time 0.5 days, plowing depth 18 cm, and 26.5% in elapsed time 2 days, plowing depth 12 cm, respectively. 3. In the plot of elapsed time 2 days and plowing depth 12 cm, the planting distance was 13.9 cm, which was closed to the proper planting distance 14 cm. 4. The percentage of missing hill was lowest(1.5%) in the plot of elapsed time 2 days and plowing depth 12 cm. 5. The planted depth in the plot of the elapsed time 2 days and plowing depth 15 cm was 2. 95 cm, which was closed to the proper planting depth 3 cm. 6. The angle of planting postures in the plot of elapsed time 2 days and plowing depth 12 cm was $89^{\circ}$, which was closed to the desirable posture angle $90^{\circ}$. 7. The deviation from the straight transplanting line was lowest in the plot of the elapsed time 2 days and plowing depth 12 cm. 8. From the results above mentioned, it is recommended that the field condition under the elapsed time 2 days and plowing depth 12 cm is the most favorable one for the working performance of rice thansplanter.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.141-146
• /
• 2003

This paper calculates the elapsed time to go down a straight as a function of the corner exit speed and considers air resistance, rolling resistance, and slope resistance to figure out the force for forward acceleration. In a car racing, the most critical comer in a course is the one before the longest straight. A driver can lose a quite amount of time by taking a bad line in a corner. Taking a bad line also causes poor comer exit speed which in turn costs more elapsed time to go down a straight. The results are not so dramatic as in the case of cornering but are showing why one should take the correct corner racing line to get the maximum exit speed. Also, for the case of drag race, the elapsed time to go 1/4 mile is calculated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.94-99
• /
• 1995

Naphthalene sulfonated condensatd(NSF) has been widely using for the superplasticizing of ement and concrete. But NSF has a very large mobility loss with elapsed tiom. To retain mobility of NSF during a certain time, maleic anhydride and acrylic acid copolymer(MA) was polymerized and mixed with NSF in order to perpare admixture holding mobility-retention property of cement. By applying this admixture for ement paste, we examined the fluidity and mobility retention property as a function to elapsed time and measured the compressive strength of mortar with curing time. As a result, NSF containing 20wt% of MA showed very excellent fluidity and mobility-retention property. These properties were affected by the added amount of admixture and the ratio of water to cement.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.259-266
• /
• 2017

The purpose of this study was to survey the effects of convergence factors and time elapsed after kidney transplantation on self-care adherence. The study included 235 patients; the data was collected from September, to October, 2014. Old age, female gender and duration of transplantation were identified as factors significantly affecting self-care adherence. Self-care adherence also showed significant differences depending on the elapsed time, and the decrease in self-care compliance was most evident between 1 and 5 years after kidney transplantation. Therefore, development of a nursing strategy that would provide education and self-care improvement programs is needed to improve self-care based on convergence factors and elapsed time.

• Asia pacific journal of information systems
• /
• v.7 no.3
• /
• pp.89-108
• /
• 1997

This study, drawing upon research in innovation theory and Information systems, investigates the relationship among the organizational and innovation characteristics and the extent of internal and external diffusion of EDI in Korean firms. The data for this study were collected from 131 firms that have implemented EDI. The results of the correlation and the multiple regression analysis show that elapsed time and organizational compatibility are the major predictors of EDI diffusion. Specifically, the extent of communication, elapsed time and organizational compatibility are the major predictors of internal diffusion, while centralization, organizational compatibility and elapsed time are closely related to external diffusion of EDI. The results of this study imply that to facilitate the use of EDI widely within and beyond organizations, EDI system should be compatibile with the organizational tasks, values systems and existing information systems.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.25-30
• /
• 2001

The purpose of this study is to present a basic data about the workability of high strength concrete to apply to a field of construction work. The main parameters are as follows; environmental temperature, elapsed time and the use of mineral admixture or not under the same mixing proportions. From the result, Adding amounts of superplasticizer to get a target slump were different in the respective temperature condition. Slump loss according to elapsed time was influenced by environmental temperature. the amount of superplasticizer and the slump loss were decreased by using mineral admixture(garnet powder) and by making concrete under lower temperature.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.457-459
• /
• 2005

OBS(Optical Burst Switching) 망에서 우선 순위를 보장해 주기 위해 채널 선정 방식(preemptive channel reservation scheme)이 제안되어 왔다. 채널 선점으로 인해 drop된 버스트의 크기가 OBS 망의 전체 성능에 영향을 끼치는 요소인데도 불구하고 기존의 채널 선점 방식은 선점될 채널 선택 시에 버스트의 채널 사용 시간(elapsed time)만을 고려하고 있다. 따라서 본 논문에서는 각 버스트의 채널 사용 시간과 버스트 길이의 합이 작은 채널을 선택하는 선점 방식으로써 Length-based Smallest Elapsed time Selection(LSE)을 제안한다 시뮬레이션을 통하여 제안하는 LSE 방식이 기존의 SE(Smallest Elapsed time)에 비해서 버스트 손실 성능 면에서 우수함을 알 수 있었다.

• Korea Real Estate Review
• /
• v.27 no.3
• /
• pp.103-118
• /
• 2017

Under the ownership pre-sale system in the South Korean apartment market, developers can sell apartment ownerships as soon as they start to construct an apartment complex. In the South Korean apartment market, people call this kind of ownership "Bun-yang right." There is a time difference between ownership sale and apartment completion under the ownership pre-sale system. The pre-completion apartment ownerships can be resold to third parties until the apartment complexes are completed, which is called "Geon-mae" of the Bun-yang right. Using survival analysis, this research analyzed the elapsed time between ownership purchase and resale to a third party using 48,316 apartment units nationwide in the 192 complexes supplied from 2000 to 2016. Specifically, this study analyzed the influence of the real estate policy, contract term, location, apartment complex, and unit characteristics on the elapsed time between ownership purchase and resale to a third party. The empirical analysis revealed that the real estate policy and contract term characteristics have a significant effect on the elapsed time between ownership purchase and resale to a third party. Also, this study confirmed that the product characteristics, such as the location and apartment complex and unit characteristics, have an influence on the elapsed time between ownership purchase and resale to a third party.