• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.133-139
• /
• 2018

Background: Selecting priority occupational carcinogens is important for cancer prevention efforts; however, standardized selection methods are not available. The objective of this paper was to describe the methods used by CAREX Canada in 2015 to establish priorities for preventing occupational cancer, with a focus on exposure estimation and descriptive profiles. Methods: Four criteria were used in an expert assessment process to guide carcinogen prioritization: (1) the likelihood of presence and/or use in Canadian workplaces; (2) toxicity of the substance (strength of evidence for carcinogenicity and other health effects); (3) feasibility of producing a carcinogen profile and/or an occupational estimate; and (4) special interest from the public/scientific community. Carcinogens were ranked as high, medium or low priority based on specific conditions regarding these criteria, and stakeholder input was incorporated. Priorities were set separately for the creation of new carcinogen profiles and for new occupational exposure estimates. Results: Overall, 246 agents were reviewed for inclusion in the occupational priorities list. For carcinogen profile generation, 103 were prioritized (11 high, 33 medium, and 59 low priority), and 36 carcinogens were deemed priorities for occupational exposure estimation (13 high, 17 medium, and 6 low priority). Conclusion: Prioritizing and ranking occupational carcinogens is required for a variety of purposes, including research, resource allocation at different jurisdictional levels, calculations of occupational cancer burden, and planning of CAREX-type projects in different countries. This paper outlines how this process was achieved in Canada; this may provide a model for other countries and jurisdictions as a part of occupational cancer prevention efforts.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.239-249
• /
• 2008

Purpose: This study intended to investigate how health and safety organization, management, activities and safety culture of healthcare industries are different from other industries (food, lodging, gas, and electricity industries). Method: Data were analyzed using '2005 The National Survey for Occupational Safety and Health Tendency'. Results: For health and safety training, both new training and regular training time of healthcare sector was lower than comparison sectors. For health and safety manager assigning form, there were many case in healthcare sector to assign a safety manager as a deputy and a health manager as an additional job, there were some differences from comparison sectors. It was found that establishment of countermeasures by cause investigation and analysis execution for occupational accidents in the healthcare sector was lower than comparison sectors. For health and safety activities and safety culture awareness, they were estimated in healthcare sector to be lower than comparison sectors. Conclusion: Healthcare sector had relatively lower health and safety activities and safety culture awareness compared with comparison sectors. So, it is required business owner's concerns and efforts to assign exclusively responsible health and safety manager and to activate health and safety training and occupational accident prevention.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.2044-2049
• /
• 2009

Recent advances in computer technology have brought more dependence on software to railway signaling systems. Hence, the safety assurance of the vital software running on the railway signaling system is very critical task and yet, not many works have been done. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety. In this paper, we suggested an automated analysis tool for S/W change impact in railway signaling system, and presented its result of implementation. The analysis items in the implemented tool had referred to the international standards in relation to the software for railway signaling system, such as IEC 61508 and IEC 62279. In these international standards, 'change impact analysis' for railway signaling system S/W has to be required mandatorily. The proposed tool can be utilized at the assessment stage and also the software development stage.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1257-1263
• /
• 2008

Recent advances in embedded system technology have brought more dependence on automating train control. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed a software testing tool to evaluate train control system software safety, expecially "Metric Analysis" module. We have reviewed requirements in the international standards and surveyed available tools in the market. From this, we identified the S/W metric analysis module is required for software evaluation. So we have developed S/W metric analysis module for railway signaling systems.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.2
• /
• pp.14-23
• /
• 2022

This paper analyzes quality management of aviation safety services in Korea and proposes practical implications for improvement. We look into how quality management is conducted in the Korean aviation industry and confirm aviation authority's efforts for a quality management system. We also compare and analyze international standard ISO 9001 and aviation safety oversight system quality management cases of International Civil Aviation Organization (ICAO) and U.S. Federal Aviation Administration (FAA) with a Korean case. Results find the difference in defining the scope of ISO 9001 management between ICAO/FAA and the Korean authority which causes unnecessary misunderstanding in oversight perception. The Korean aviation authority strives to provide a high level of safety oversight services by educating aviation safety inspectors as well as establishing a quality management system. We believe that our proposals can help Korean aviation safety oversight system secure objective credibility and seek a safe growth and development of the aviation industry.

• Journal of the Society of Disaster Information
• /
• v.7 no.4
• /
• pp.305-315
• /
• 2011

The purpose of this study is to strive people from expert and to make efforts to prevent the recurrence of government after su-chel, kim case. it is put out school strengthened safety measures continuously however external danger has increased. It is necessary to prevent revaluation of safety measures and improvement go through take the most basic safety measures, changing awareness to the external danger and reduce the loss to a minimum. There are some resolution to be effective management of guard and way to expand, application of CPTED technique and installation of school fence, liaison between increasing CCTV and equipment, improvement on operational school safety management.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.35-40
• /
• 2010

Many casualties are being occurred due to many misses the railway platform, and the accident occurrence is being increased. Recently in Korea, efforts to prevent casualties fundamentally are being made by installing and operating the PSD(Passenger Screen Door) as to prevent these casualties of passengers. However, in case of the PSD system, although it can solve the problem of public casualties at platform fundamentally, it is impossible to install it at whole railway platforms. This paper proposes the safety equipment using LaserRadar sensor for the prevention against casualties of passengers at platform. The safety equipment using novel sensor is the safety equipment making an approaching train stopped if the falling object is a person by detecting the obstacle at platform, and it has the merit possible to apply it to platform since it may detect accurately under ambient environmental elements such as the snow, rain and yellow dust, etc. also. We manufactured a prototype of the safety equipment to reduce public casualties at platform by using LaserRadar sensor and carried out its performance test, and the result is presented in this paper.

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.151-165
• /
• 2019

Background: Despite improvements in safety performance, the number and severity of mining-related injuries remain high and unacceptable, indicating that further reduction can be achieved. This study examines occupational accident statistics of the Ghanaian mining industry and identifies priority areas, warranting intervention measures and further investigations. Methods: A total of 202 fatal and nonfatal injury reports over a 10-year period were obtained from five mines and the Inspectorate Division of the Minerals Commission of Ghana, and they were analyzed. Results: Results of the analyses show that the involvement of mining equipment, the task being performed, the injury type, and the mechanism of injury remain as priorities. For instance, mining equipment was associated with 85% of all injuries and 90% of all fatalities, with mobile equipment, component/part, and hand tools being the leading equipment types. In addition, mechanics/repairmen, truck operators, and laborers were the most affected ones, and the most dangerous activities included maintenance, operating mobile equipment, and clean up/clearing. Conclusion: Results of this analysis will enable authorities of mines to develop targeted interventions to improve their safety performance. To improve the safety of the mines, further research and prevention efforts are recommended.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.433-446
• /
• 2022

Despite efforts to reduce unexpected accidents at confined construction sites, choking accidents continue to occur. Because of the poorly ventilated atmosphere, particularly in long, confined underground spaces, workers are subject to dangerous working conditions despite the use of artificial ventilation. Moreover, the traditional monitoring methods of using portable gas detectors place safety inspectors in direct contact with hazardous conditions. In this study, a long-range (LoRa)-based wireless safety monitoring system that features the network organization, fault-tolerant, power management, and a graphical user interface (GUI) was developed for underground construction sites. The LoRa wireless data communication system was adopted to detect hazardous gases and oxygen deficiency within a confined underground space with adjustable communication range and low power consumption. Fault tolerance based on the mapping information of the entire wireless sensor network was particularly implemented to ensure the reliable operation of the monitoring system. Moreover, a sleep mode was implemented for the efficient power management. The GUI was also developed to control the entire safety-monitoring system and to manage the measured data. The developed safety-monitoring system was validated in an indoor testing and at two full-scale water pipeline construction sites.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.219-223
• /
• 2012

For an off-site consequence analysis at nuclear power plant, MELCOR Accident Consequence Code System(MACCS) II code is widely used as a software tool. In this study, the algorithm of web-based off-site consequence analysis program(OSCAP) using the MACCS II code was developed for an Integrated Leak Rate Test (ILRT) interval extension and Level 3 probabilistic safety assessment(PSA), and verification and validation(V&V) of the program was performed. The main input data for the MACCS II code are meteorological, population distribution and source term information. However, it requires lots of time and efforts to generate the main input data for an off-site consequence analysis using the MACCS II code. For example, the meteorological data are collected from each nuclear power site in real time, but the formats of the raw data collected are different from each site. To reduce the efforts and time for risk assessments, the web-based OSCAP has an automatic processing module which converts the format of the raw data collected from each site to the input data format of the MACCS II code. The program also provides an automatic function of converting the latest population data from Statistics Korea, the National Statistical Office, to the population distribution input data format of the MACCS II code. For the source term data, the program includes the release fraction of each source term category resulting from modular accident analysis program(MAAP) code analysis and the core inventory data from ORIGEN. These analysis results of each plant in Korea are stored in a database module of the web-based OSCAP, so the user can select the defaulted source term data of each plant without handling source term input data.