• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.161-169
• /
• 2009

Multicast-based data communication is an efficient communication scheme in wireless networks where the Media Access Control (MAC) layer is based on one-hop broadcast from one source to multiple receivers. Compared with unicast, multicast over wireless channel should handle varying channel conditions of multiple users and user mobility to achieve good quality for all users. However, IEEE 802.11 does not support reliable multicast due to its inability to exchange RTS/CTS and ACK with multiple recipients. Thus, several MAC layer protocols have been proposed to provide reliable multicast. For the reliable multicast, an additional overhead is introduced and it degrades the system performance. In this paper, we propose a cross-layer design to reduce the control overhead for reliable multicast in OFDMA systems. We present an analytical formulation of the system throughput associated with the overhead.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.53-59
• /
• 2009

As a special type of Wireless Ad Hoc Networks, Wireless Mesh Networks (WMNs) have become the comer stone of research issues. Due to the limited operational environment of WMNs, an efficient connected dominating set (CDS) construction scheme is an important concern since it has been found extremely useful in broadcasting, routing and virtual backbone construction. In this paper, we propose a distributed Bandwidth-Interference aware CDS construction scheme to improve the network performance via two parameters such as node's number of neighbor and link bandwidth. Our CDS construction scheme selects the node that has more neighbors and enough bandwidth to support more end-devices in order to enhance overall network throughput and reliability. We confirm through simulations and show that our scheme constructs the CDS with the small subset of DS and the link that has better bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1135-1144
• /
• 2013

Deploying small cells is a reliable and influential solution to handle the skyrocketing traffic increase in the cellular network, and the small cell technology is evolving to ultra-dense network (UDN). In this paper we propose a small cell on/off algorithm with a simple but essential framework composed of access point (AP), user equipment (UE), and small cell controller (SCC). We propose Device-Assisted Networking for Cellular grEening (DANCE) algorithms that save the energy consumption by tying to minimize the number of turned-on APs while maintaining the network throughput. In doing so, SCC firstly gathers the feedback messages from UEs and then makes a decision including a set of turned-on APs and user association. DANCE algorithm has several variations depending on the number of bits of the UE's feedback message (1 bit vs. N bit), and is divided into AP-first, UE-first, or Proximity ON according to the criteria of selecting the turned-on APs. We perform extensive simulations under the realistic UDN environment, and the results confirm that the proposed algorithms, compared to the baseline, can significantly enhance the energy efficiency, e.g., more than a factor of 10.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.301-308
• /
• 2007

This paper proposes high performance coprocessor architecture for real time dense disparity computation based on a phase-based binocular stereo matching technique called local weighted phase-correlation(LWPC). The algorithm combines the robustness of wavelet based phase difference methods and the basic control strategy of phase correlation methods, which consists of 4 stages. For parallel and efficient hardware implementation, the proposed architecture employs SIMD(Single Instruction Multiple Data Stream) architecture for each functional stage and all stages work on pipelined mode. Such that the newly devised pipelined linear array processor is optimized for the case of row-column image processing eliminating the need for transposed memory while preserving generality and high throughput. The proposed architecture is implemented with Xilinx HDL tool and the required hardware resources are calculated in terms of look up tables, flip flops, slices, and the amount of memory. The result shows the possibility that the proposed architecture can be integrated into one chip while maintaining the processing speed at video rate.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.2
• /
• pp.53-65
• /
• 2016

Static wireless multi-hop networks, such as wireless mesh networks and wireless sensor networks have proliferated in recent years because of they are easy to deploy and have low installation cost. Two key measures are used to evaluate the performance of a multicast tree algorithm or protocol : end-to-end delay and the number of transmissions. End-to-end delay is the most important measure in terms of QoS because it affects the total throughput in wireless networks. Delay is similar to the hop count or path length from the source to each destination and is directly related to packet success ratio. In wireless networks, each node uses the air medium to transmit data, and thus, bandwidth consumption is related to the number of transmission nodes. A network has many transmitting nodes, which will cause many collisions and queues because of congestion. In this paper, we optimize two metrics through a guaranteed delay scheme. We provide an integer linear programming formulation to minimize the number of transmissions with a guaranteed hop count and preprocessing to solve the aforementioned problem. We extend this scheme not only with the guaranteed minimum hop count, but also with one or more guaranteed delay bounds to compromise two key metrics. We also provide an explanation of the proposed heuristic algorithm and show its performance and results.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.53-60
• /
• 2007

A Digital Broadcasting Satellite (DBS) receiver converts digital A/V streams received from a satellite to analog NTSC A/V signals in real-time. Multi-tasking is an efficient way to improve the utilization of the processor core in real-time applications. In this paper, we propose a hybrid approach with a balanced trade-off between hardware kernel and multi-tasking programming to increase a system throughput. First, the schedulability of the critical hard real-time tasks in the DBS receiver is verified by using a simple feasibility test. Then, several soft real-time tasks are thoughtfully programmed to satisfy functional requirements of the system.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.12
• /
• pp.1968-1976
• /
• 2006

Recombinant E. coli ACV 1003 (recA:: lacZ) was used to measure low concentrations of DNA-damaging chemicals, which produce $\beta$-galactosidase via an SOS regulon system. Very low $\beta$-galactosidase activities of less than 0.01 unit/ml, $\beta$-galactosidase produced through an SOS response corresponding to the 10 ng/ml (ppb) of DNA damaging chemicals in the environment, can be rapidly determined by using an alternative interferometric biosensor with optically flat thin films of porous silicon rather than by the conventional time-consuming Miller's enzyme assay as well as the ELISA method. fu order to enhance the sensitivity in the interferometry, it needs to obtain more uniform distribution and higher biolinking efficiency, whereas interferometric sensing is rapid, cheap, and advantageous in high throughput by using a multiple-well-type chip. In this study, pore size adjusted to 60 nm for the target enzyme $\beta$-galactosidase to be bound on both walls of a Si pore and a calyx crown derivative was apllied as a more efficient biolinker. Furthermore, anti-$\beta$-galactosidase was previously functionalized with the biolinker for the target $\beta$-galactosidase to be specifically bound. When anti-$\beta$-galactosidase was bound to the calyx-crown derivative-linked surface, the effective optical thickness was found to be three times as high as that obtained without using anti-$\beta$-galactosidase. The resolution obtained was very similar to that afforded by the time-consuming ELISA method; however, the reproducibility was still unsatisfactory, below 1 unit $\beta$-galactosidase/ml, owing to the microscopic non-uniform distribution of the pores in the etched silicon surface.

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.101-110
• /
• 2011

WMN is highlighted as a next generation network technology due to relatively reasonable cost to be built, compared with the pre-existing wireless network. It also enables same kind of network or even other kind of network to be integrated. Some WMN researches support mobility using router protocol such as AODV and DSR because WMN has the similar features with Ad-hoc network in terms of operation. However, WMN has got different operations with additional functions of multi-interface and internet connect, it can't be a good method to manage efficient mobility any more. This study suggests method to apply MAP function of HMIPv6 to WMN as a way to manage WMN mobility. Through simulation, operation was verified and function was appreciated. Through the results of evaluation, the suggest mobility management had shorter handover delay and packet loss reduced, which improved whole network throughput rate, compared with mobility management using AODV.

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.37-47
• /
• 2011

Current researches in the Cloud focus on the appropriate interactions of cloud components in a large-scale system implementation. However, the current designs do not include intelligent methods like grouping the similar service providers based on their properties and integrating adaptive schemes for load distribution which can promote effective sharing of resource. This paper proposes an efficient virtualization of services by grouping the cloud providers to improve the service provisioning. The grouping of cloud service providers based on a cluster analysis collects the similar and related services in one group. The adaptive load balancing supports the service provisioning of the cloud system where it manages the load distribution within the group using an adaptive scheme. The proposed virtualization mechanism (GRALB) showed good results in minimizing message overhead and throughput performance compared to other methods.

• Journal of Biosystems Engineering
• /
• v.31 no.1 s.114
• /
• pp.33-38
• /
• 2006

This work was conducted to find the operating characteristics of an efficient wet grinding system designed to obtain fine rice husk ash powder. Once the rice husk was combusted and the thermal energy was recovered from the furnace, the ash was fed and pulverized in the grinding system resulting a fine powder to be used as a supplementary adding material to the portland cement. Grinding time (15, 30, 45 min), impeller speed (250, 500, 750 rpm), and mixed ratio (6.7, 8.4, 11.l, 20.9) were three operating factors examined for the performance of a wet-type stirred ball mill grinding system. For the operating conditions employed, mean diameter of fine ash powder, specific energy input, and grinding energy efficiency were in the range of $2.83{\sim}9.58{\mu}m,\;0.5{\sim}6.73kWh/kg,\;and\;0.51{\sim}3.27m^2/Wh$, respectively. With the wet-type stirred ball mill grinding system used in this study, the grinding energy efficiency decreased with the increase in total grinding time, impeller speed, and mixed ratio. The difference in specific surface area of powder linearly increased with logarithm in total number of impeller revolution and the grinding energy efficiency linearly decreased. Grinding time of 45 min, impeller speed of 500 rpm, and mixed ratio of 6.7 were chosen as the best operating condition. At this condition, mean particle diameter of the fine ash, grinding energy efficiency, grinding throughput, and specific energy input were $2.84{\mu}m,\;2.28m^2/Wh,\;0.17kg/h$, and 2.03kWh/kg, respectively. Wet fine grinding which generates no fly dust causing pollution and makes continuous operation easy, is appeared to be a promising solution to the automatization of rice husk ash grinding process.