• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.513-520
• /
• 2005

High-speed Portable Internet system provides 1-3 Mbps data transmission speed to terminals moving up to 60 km/sec. Since High-speed Portable Internet system supports services requiring different QoS, it needs an efficient scheduling method based on those different QoSs. This paper shows the performance comparisons of several different packet scheduling schemes for minimizing the mean delay over the downlink of High-speed Portable Internet system to support the packet data service. Simulation results show that proposed scheme superior to other schemes at side throughput and data loss rate.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.510-517
• /
• 2010

In this paper, an adaptive MAC protocol (variable load adaptive (VLA)-MAC) is proposed for wireless sensor networks. This protocol can achieve high energy efficiency and provide low latency under variable-traffic-load conditions. In the case of VLA-MAC, traffic load is measured online and used for adaptive adjustment. Sensor nodes transmit packets in bursts under high load conditions to alleviate packet accumulation and reduce latency. This also removes unnecessary listen action and decreases energy consumption in low load conditions. Simulation results show that the energy efficiency, latency, and throughput achieved by VLA-MAC are higher than those achieved by some traditional approaches.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.24 no.2
• /
• pp.95-108
• /
• 1999

The CDMA mobile system consists of several subsystems and each subsystem has many processing elements that handle voice messages and control messages for performing CDMA call processing functions through CDMA Interconnection Network(CIN). For assuring a high throughput and a short delay in the CIN, an efficient medium access control protocol should be provided. In this paper, we propose a new access control protocol of CIN for providing real time communications in CDMA mobile system. Also, we evaluate the delay performance of the proposed access control protocol and compare it with that of the existing access control protocol. Through a set of numerical examples, we show that our proposed protocol provides a better delay performance than the existing protocol.

• Journal of Information Processing Systems
• /
• v.4 no.2
• /
• pp.41-52
• /
• 2008

In this paper, we discuss a novel reservation-based, asynchronous MAC protocol called 'Multi-rate Multi-hop MAC Protocol' (MMMP) for multi-hop ad hoc networks that provides QoS guarantees for multimedia traffic. MMMP achieves this by providing service differentiation for multirate real-time traffic (both constant and variable bit rate traffic) and guaranteeing a bounded end-to-end delay for the same while still catering to the throughput requirements of non real time traffic. In addition, it administers bandwidth preservation via a feature called 'Smart Drop' and implements efficient bandwidth usage through a mechanism called 'Release Bandwidth'. Simulation results on the QualNet simulator indicate that MMMP outperforms IEEE 802.11 on all performance metrics and can efficiently handle a large range of traffic intensity. It also outperforms other similar state-of-the-art MAC protocols.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.390-393
• /
• 2006

IEEE 802.11e 과 IEEE 802.11n에서 data의 높은 전송률을 구현하기 위해 Block Ack와 frame agegation 과 같은 새로운 mechanism이 논의 되고 있다. 이러한 mechanism은 각각의 MPDU processing 마다 짧은 응답시간을 요구한다. 본 논문에서는 위의 새로운 MAC을 지원하는 IEEE 802.11i를 위한 효율적인 CCMP 설계를 제안한다. 제안된 설계에서는 한 AES-CCM core에서 MIC calculation 과 정보 암호화가 128bit씩 순차적으로 수행되어지는 mode toggling 접근을 채택했다. 본 설계에서는 응답시간이 44 clock cycle의 짧은 짧은 시간으로 줄었다. 또한 하나의 AES-CCM core를 사용하고 낮은 주파수에서 수용할만한 data throughput과 응답시간을 얻었기 때문에 하드웨어적인 복잡성과 전력 소모를 줄일수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.385-390
• /
• 2013

This paper proposes an efficient hardware architecture of CABAC for HEVC decoder. The proposed method is structured to handle two bins in one cycle, while preserving data dependencies of the CABAC. In addition, the processing time of the proposed architecture is reduced because the operation using Offset and Range is processed while the architecture reads rLPS from rLPSROM. As a result of analyzing operating frequency of the proposed CABAC architecture, the proposed architecture has improved by 40% than the previous one.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1941-1948
• /
• 2000

Multistage interconnection networks (MINs) have been recognized as an efficient interconnection network for high-performance computer systems and also have been recently identified to be effective for a switching fabric of new communication structures - gigabit ethernet switch, terabit router, and ATM (asynchronous transfer mode). While lots of models analyzing the performance of MINs have been proposed, they are either inaccurate or, even if accurate, very complex for the analysis. In this paper, we propose an extremely simple mode for evaluating the multibuffered MIN with small clock cycles based on the approximation approach. Comprehensive computer simulation shows that the proposed model is very accurate in terms of the throughput and mean delay. Furthermore, it significantly reduces the computing overhead due to its simplicity.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.532-537
• /
• 2007

Nano imprint lithography(NIL) is a cost-efficient, high-throughput processing technique to transfer nano-scale patterns onto thin polymer films. Polymers used as the resist include UV cured resins as well as thermoplastics such as polymethyl-methacrylate(PMMA). In this study, an analytic investigation was performed for the NIL process of transferring nano scale patterns onto polymeric films. Process optimization calls for a thorough understanding of resist flow during the process. We carried out 2D and 3D numerical analyses of resist flow during NIL process. The simulation incorporated continuum-hypothesis and the effects of surface tension were taken into account. For a more effective prediction of free surface, fixed grid scheme with the volume of fluid (VOF) method were used. The simulation results were verified with experimental results qualitatively. And the parametric study was performed for various process conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1976-1996
• /
• 2011

Cognitive radio (CR) MAC protocol provides access control of unused spectrum resources without causing interference to primary users. To achieve this goal, in this paper a TDMA based cooperative multi-channel cognitive radio MAC (MCR-MAC) protocol is proposed for wireless ad hoc networks to provide reliable protection for primary users by achieving cooperative detection of incumbent system signals around the communication pair. Each CR node maintains transmission opportunity schedules and a list of available channels that is employed in the neighbor discovery period. To avoid possible signal collision between incumbent systems and cognitive radio ad hoc users, we propose a simple but efficient emergency notification message exchanging mechanism between neighbor CR nodes with little overhead. Our simulation results show that the proposed MCR-MAC can greatly reduce interference with primary users and remarkably improve the network throughput.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.1
• /
• pp.1-10
• /
• 2003

A recent trend In flexible manufacturing systems (FMS) Is to utilize the Identical versatile machines with fast tool delivery devices. Unlike a conventional FMS where parts are fed to the machines with the required tools, tools are acquired from other machines using a tool delivery system and parts can be finished on the same machine In these FMS. Therefore it Is more important problem 4o plan tool flow using tool delivery system In these FMS rather than part flow In conventional FMS. According to the existing study, In FMS 20∼30 percent of the total management cost Is the cost related with tools and It Is possible to reduce the tool Inventory by 40 percent using efficient tool allocation. In this study, In FMS under dynamic tool allocation strategy, a new method of part release considering tool flow at the stage of part release Is proposed. In order to prove the efficiency of the proposed part release It is compared with other part release through simulation experiments. Performance measures in these experiments are the throughput and the number of tardy parts.