• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.69-78
• /
• 2011

Recently, the bandwidth available to an end user has been dramatically increasing with the advancing of network technologies. This high-speed network naturally requires faster and/or stable data transmission techniques. The UDT(UDP based Data Transfer protocol) is a UDP based transport protocol, and shows more efficient throughput than TCP in the long RTT environment, with benefit of rate control for a SYN time. With a NAK event, however, it is difficult to expect an optimum performance due to the increase of fixed sendInterval and the flow control based on the previous RTT. This paper proposes a rate control method on following a NAK, by adjusting the sendInterval according to some degree of RTT period which calculated from a set of experimental results. In addition, it suggests an improved flow control method based on the TCP vegas, in order to predict the network congestion afterward. An experimental results show that the revised flow control method improves UDT's throughput about 20Mbps. With combining the rate control and flow control proposed, the UDT throughput can be improved up to 26Mbps in average.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.412-420
• /
• 2006

With the appearance of various types of traffic services in communication networks, a study on QoS(Quality of Service) packet scheduling mechanisms which can support differentiated service to each traffic service becomes very important. To meet this requirement, IEEE 802.11 Working Group established the IEEE 802.11e MAC protocol which categorizes every traffic services into 4 access categories(AC) and provides the differentiated service to each AC. In addition, the physical layer of IEEE 802.11a/g standards provide up to 54 Mbps transmission rate per one wireless LAN terminal. However, since the radio resource is hardly limited in wireless channel, it is necessary to find an efficient packet scheduling scheme to maximize the transmission efficiency. Therefore, in this paper, we proposed a new packet scheduling scheme that can enhance the total throughput by setting different contention windows(CW) of CSMA-CA channel access scheme to each wireless LAN terminal according its current channel states. Numerical results derived from using NS-2 network simulator have shown that our proposed packet scheduling scheme can enhance the performance of IEEE 802.11e more and more.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.84-93
• /
• 2007

In this paper, a Radix-8 structure for high-speed FFT is propose. Main block of the proposed FFT structure is Radix-8 DIF(Decimation In Frequency) butterfly. Even throughput of the Radix-8 FFT is twice than that of the Radix-4 FFT, implementation area of the Radix-8 is larger than that of Radix-4 FFT. But, implementation area of the proposed Radix-8 FFT was reduced by using DA(Distributed Arithmetic) for multiplication. For comparison, the 64-point FFT was implemented using conventional Radix-4 butterfly and proposed Radix-8 butterfly, respectively. The Verilog-HDL coding results for the proposed FFT structure show 49.2% cell area increment comparison with those of the conventional Radix-4 FFT structure. Namely, to speed up twice, 49.2% of area cost is required. In case of same throughput, power consumption of the proposed structure is reduced by 25.4%. Due to its efficient processing scheme, the proposed FFT structure can be used in large size of FFT like OFDM Modem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.505-516
• /
• 2012

According to distribute of resource of macro cell and reduce distance between transmitter and receiver, Femto cell system is promising to provide costeffective strategy for high data traffic and high spectral efficient services in future wireless cellular system environment. However, the co-channel operation with existing Macro networks occurs some severe interference between Macro and Femto cells. Hence, the interference cancellation or management schemes are imperative between Macro and Femto cells in order to avoid the decrease of total cell throughput. First, we briefly investigate the conventional resource allocation and interference cancellation scheme between Macro and Femto cells. So we found that cell throughput and frequency reuse ware decreased Then, we propose an adaptive resource allocation scheme based on the distribution of Femtocell traffic in order to increase the cell throughput and also maximize the spectral efficiency over the FFR (Fractional Frequency Reuse) based conventional resource allocation schemes. Simulation Results show that the proposed scheme attains a bit similar SINR (Signal to Interference Noise Ratio) distribution but achieves much higher total cell throughput performance distribution over the conventional resource allocation schemes for FFR and future IEEE 802.16m based Femtocell network environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.24-33
• /
• 2007

In this paper, two different dynamic cell coordination strategies for frequency flat and selective fading are proposed for efficient subcarrier allocation in the joint consideration of adaptive modulation and variable frequency reuse in the channel-aware OFDMA downlink multicellular environment. Compared to a conventional OFDMA system without cell coordination, where system throughput may become degraded due to the persistent interference from other cells, the proposed system dynamically allows RNC to apply different reuse factors on each subchannel and scheduling in consideration of channel and interference conditions of individual users so as to increase the system throughput and guarantee QoS of each user. In a frequency flat fading, the dynamic scheme with the proposed scheduling achieves on average three times larger throughput than the conventional dynamic scheme [8]. In a selective fading channel, the proposed schemes showed 2.6 times as large throughput as that of a single reuse factor of one for all subchannels.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.178-188
• /
• 2024

In the near future, it is expected that there will be billions of connected devices using fifth generation (5G) network services. The recently available base stations (BSs) need to mitigate their loads without changing and at the least monetary cost. The available spectrum resources are limited and need to be exploited in an efficient way to meet the ever-increasing demand for services. Device to Device communication (D2D) technology will likely help satisfy the rapidly increasing capacity and also effectively offload traffic from the BS by distributing the transmission between D2D users from one side and the cellular users and the BS from the other side. In this paper, we propose to apply D2D overlay communication with cognitive radio capability in 5G networks to exploit unused spectrum resources taking into account the dynamic spectrum access. The performance metrics; throughput and delay are formulated and analyzed for CSMA-based medium access control (MAC) protocol that utilizes a common control channel for device users to negotiate the data channel and address the contention between those users. Device users can exploit the cognitive radio to access the data channels concurrently in the common interference area. Estimating the achievable throughput and delay in D2D communication in 5G networks is not exploited in previous studies using cognitive radio with CSMA-based MAC protocol to address the contention. From performance analysis, applying cognitive radio capability in D2D communication and allocating a common control channel for device users effectively improve the total aggregated network throughput by more than 60% compared to the individual D2D throughput without adding harmful interference to cellular network users. This approach can also reduce the delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.342-345
• /
• 2004

An efficient hybrid ARQ scheme based on the rate compatible block turbo codes has been proposed, and its performance has been analyzed. System efficiency is improved by means of adaptive rate code transmission using channel information, trading off bit rate for channel codes, with resulting energy saving. The rate adaptation scheme improves power efficiency while keeping packet delay minimized. On the other hand, power dependant strategies reduce power consumption. Simulation results show that the benefits obtained are very encouraging. The modified hybrid ARQ schemes with the channel information and efficient retransmission structures highly improve the throughput performance in the satellite communication system. Therefore, proposed schemes could be used in future communication systems.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.357-369
• /
• 1995

Wafer fabrication process is the most important and critical process in semiconductor manufacturing. The process is very complicated and hard to establish an efficient schedule due to its complexity. Furthermore, several performance indices such as due dates, throughput, cycle time and workstation utilizations are to be considered simultaneously for an efficient schedule, and some of these indices have negative correlations in performances each other. We develop an efficient heuristic scheduling algorithm; Hybrid Input Control Policy and Hybrid Dispatching Rule. Through numerical experiments, it is shown that the proposed Hybrid Scheduling Algorithm gives better performance compared with existing algorithms.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.360-363
• /
• 1999

Video data compression is a major key technology in the field of multimedia applications. Variable-length coding is the most popular data compression technique which has been used in many data compression standards, such as JPEG, MPEG and image data compression standards, etc. In this paper, we present memory efficient VLC decoder architecture for MPEG-2 application which can achieve small memory space and higher throughput. To reduce the memory size, we propose a new grouping, remainder generation method and merged lookup table (LUT) for variable length decoders (VLD's). In the MPEG-2, the discrete cosine transform (DCT) coefficient table zero and one are mapped onto one memory whose space requirement has been minimized by using efficient memory mapping strategy The proposed memory size is only 256 words in spite of mapping two DCT coefficient tables.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.211-213
• /
• 2003

RED 파라미터를 가장 적합하게 설정할지라도 RED 라우터의 처리량(Throughput)이 TD 라우터 보다 획기적으로 향상되기는 매우 어려운 일이다 하지만 REO 라우터를 이용하여 TCP 커넥션들간의 페어니스(Fairness)와 페어니스 향상에 따른 전체 네트워크 이용률(Utilization)을 높일 수는 있다. 본 논문에서는 네트워크 상황에 따라 동적으로 RED 파라미터를 조절하면서 빠르게 안정적인 상태로 적응하는 진보된 RED 알고리즘인 ea-RED(Efficient Adaptive RED)의 성능을 네트워크 시뮬레이션 툴인 NS-2를 이용하여 TD. RED 알고리즘과 다양하게 실험하고 비교 분석한다. 이 실험을 통해 병목구간에서 혼잡이 심할 경우, ea-RED 라우터가 RED나 TD 라우터에 비해 큐를 효율적으로 사용하면서도 보다 높은 페어니스 인덱스 값을 갖는다는 점을 확인할 수 있다.