• Journal of Information Technology Applications and Management
• /
• v.10 no.2
• /
• pp.61-71
• /
• 2003

Ad-hoc networks are characterized by multi-hop wireless links, frequently changing network topology and the need for efficient dynamic routing protocols. In an Ad-hoc network, each host assumes the role of a router and relays packets toward final destinations Because a packet is broadcast to all neighboring nodes, the optimality criteria of wireless network routing is different from that of wired network routing. tn this paper 1 point out the more important cost factor than the number of links in the Ad-hoc network. A class routing protocols called on-demand protocols has recently found attention because of their low routing overhead since it performs a blind flooding to look for a path. In this paper, 1 propose the method which reduces overhead by using the information of neighboring nodes and doing a selective flooding. Simulation results demonstrate better reduction of routing overheads with this scheme.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.142-151
• /
• 1996

This paper presents a new symmetrical routing architecture for FPGA and an efficient routing algorithm for the architecture. The routing architecture adopts the segmented wires and the improved switch modules. Segmetned wires construct routing channels which pass through the chip in vertical and horizontal directions. To maximize the utility of a track, a track in each switch module can be separated in two part using a programmable switch to route two different net. The proposed routing algorithm finds all assignable tracks for a given net and selects the best track from assignable tracks to minimize the number of programmable switches and the unused portion of the wire segments. In order to stabilize the perfomrance of the algorithm, the routing order is defined by weighted sum of the number of wire segment, the length of wire segmetn, and the number of pin. Experimental results show that routability is improved dramatically and the number of crossing switches are reduced about 40% compared with the previous works.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.406-416
• /
• 2001

Single path routing schemes using dynamic routing metric amy find out the dynamic network status and recompute paths to keep the traffic from the highly loaded regions of the network. This type of routing approach, however, may lead to a routing oscillation, and further, it cannot exploit multi-paths that may frequently exist in the real network. We propose a multipath routing scheme with dynamic load balancing, called MP-DLB, which is capable of reducing the overhead incurred by the multipath routing with dynamic load balancing approach while taking advantage of the high routing performance provided by the approach. According to the analysis of Internet packet traces which show that a high percentage of network traffic is destined for a small number of networks, MP-DLB applies the multipath routing with dynamic load balancing only to a limited subset of all the destinations in the network. For the rest of the destinations, it applies traditional single path routing scheme. This approach may reduce overall routing overheads by limiting the number of destinations to apply the more complicated routing scheme while it can keep the routing performance high by providing efficient routing for the most significant traffic in the routing performance. A series of simulations are done to analyze the performance of MP-DLB. The simulation results show that MP-DLB may effectively cope with the congestion and achieve high routing performance by distributing traffic streams that are generated from varying sources and heading toward a specific hot destination over multi-paths.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.371-388
• /
• 2014

Cognitive Radio (CR) has been recently proposed as a promising technology to remedy the problems of spectrum scarcity and spectrum underutilization by enabling unlicensed users to opportunistically utilize temporally unused licensed spectrums in a cautious manner. In Cognitive Radio Ad Hoc Networks (CRAHNs), data routing is one of the most challenging tasks since the channel availability and node mobility are unpredictable. Moreover, the network performance is severely degraded due to large numbers of path failures. In this paper, we propose the Fault-Tolerant Cognitive Ad-hoc Routing Protocol (FTCARP) to provide fast and efficient route recovery in presence of path failures during data delivery in CRAHNs. The protocol exploits the joint path and spectrum diversity to offer reliable communication and efficient spectrum usage over the networks. In the proposed protocol, a backup path is utilized in case a failure occurs over a primary transmission route. Different cause of a path failure will be handled by different route recovery mechanism. The protocol performance is compared with that of the Dual Diversity Cognitive Ad-hoc Routing Protocol (D2CARP). The simulation results obviously prove that FTCARP outperforms D2CARP in terms of throughput, packet loss, end-to-end delay and jitter in the high path-failure rate CRAHNs.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.83-90
• /
• 2010

DTNs (Delay Tolerant Networks) refer to the networks that can support data transmission in the extreme networking situations such as continuous delay and no connectivity between ends. DTMNs (Delay Tolerant Networks) are a specific range of DTNs, and its chief considerations in the process of message delivery in the routing protocol are the transmission delay, improvement of reliability, and reduction of network loading. This article proposes a new LCN (Largest Common Neighbor) routing algorism to improve Spray and Wait routing protocol that prevents the generation of unnecessary packets in a network by letting mobile nodes limit the number of copies of their messages to all nodes to L. Since higher L is distributed to nodes with directivity to the destination node and the maximum number of common neighbor nodes among the mobile nodes based on the directivity information of each node and the maximum number of common neighbor nodes, more efficient node transmission can be realized. In order to verify this proposed algorism, DTN simulator was designed by using ONE simulator. According to the result of this simulation, the suggested algorism can reduce average delay and unnecessary message generation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.401-405
• /
• 2007

In sensor network, cluster based routing protocol about efficient energy usage method has researched variously. But existing cluster based routing protocol have problems. one of the problem is sensor nodes's imbalance energy consumption problem at cluster reconstruction. anther is non- connection problem between header node and spc node when they are far from each other, not properly connected. We propose cluster re-division and header node of multihop transmission method in this paper. The cluster re-division method is the method that re-divides existing routing protocol with the small-scale cluster and multihop transmission method is the method regarding the relay transmission between the header nodes. Through the simulation, the proposed routing mechanism shows more excellent than exiting routing protocol in balance energy consumption and energy efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1223-1247
• /
• 2012

The need for securing Wireless Sensor Networks (WSNs) is essential especially in mission critical fields such as military and medical applications. Security techniques that are used to secure any network depend on the security requirements that should be achieved to protect the network from different types of attacks. Furthermore, the characteristics of wireless networks should be taken into consideration when applying security techniques to these networks. In this paper, energy efficient Security Model for Tree-based Routing protocols (SMTR) is proposed. In SMTR, different attacks that could face any tree-based routing protocol in WSNs are studied to design a security reference model that achieves authentication and data integrity using either Message Authentication Code (MAC) or Digital Signature (DS) techniques. The SMTR communication and processing costs are mathematically analyzed. Moreover, SMTR evaluation is performed by firstly, evaluating several MAC and DS techniques by applying them to tree-based routing protocol and assess their efficiency in terms of their power requirements. Secondly, the results of this assessment are utilized to evaluate SMTR phases in terms of energy saving, packet delivery success ratio and network life time.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.67-73
• /
• 2010

Current on-demand ad-hoc routing protocols are not appropriate for wireless mesh networks (WMNs), because flooding-based route discovery is both redundant and expensive in terms of control message overhead. In this paper, we propose an efficient on-demand routing approach with directional flooding (DF), which is suitable for the WMNs with limited mobility. In the route discovery process to reach a gateway, our DF scheme can reduce the number of route request (RREQ) packets broadcast by using a restricted directional flooding technique. Simulation results show that ad hoc on-demand distance vector (AODV) with DF (AODV-DF) can significantly reduce routing overhead by RREQ packets and enhance overall performance compared with the original AODV.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.1
• /
• pp.114-119
• /
• 2003

An efficient QoS routing scheme for improving on-line games services needs to find a path that satisfies a given noS requirements while consuming as few resources as possible. In this paper, we propose a scheme of calculating resources' costs for precomputation QoS routing schemes. For a domain in the networks. the routing scheme first precomputes K multiple paths between all pairs of ingress and egress border routers while considering balancing of the expected load. We. therefore, expect that the paths are better than any other paths in respect to reserving the network resources on paths. The routing scheme combines inter and intra domain routings seamlessly and uses the same cost calculation scheme.

• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.17-25
• /
• 2011

A convergecast is a popular routing scheme in wireless sensor networks (WSNs) in which every sensor node periodically forwards measured data along configured routing paths to a base station (BS). Prolonging lifetimes in energy-limited WSNs is an important issue because the lifetime of a WSN influences on its quality and price. Low-energy adaptive clustering hierarchy (LEACH) was the first attempt at solving this lifetime problem in convergecast WSNs, and it was followed by other solutions including power efficient gathering in sensor information systems (PEGASIS) and power efficient data gathering and aggregation protocol (PEDAP). Our solution-chain routing with even energy consumption (CREEC)-solves this problem by achieving longer average lifetimes using two strategies: i) Maximizing the fairness of energy distribution at every sensor node and ii) running a feedback mechanism that utilizes a preliminary simulation of energy consumption to save energy for depleted Sensor nodes. Simulation results confirm that CREEC outperforms all previous solutions such as LEACH, PEGASIS, PEDAP, and PEDAP-power aware (PA) with respect to the first node death and the average lifetime. CREEC performs very well at all WSN sizes, BS distances and battery capacities with an increased convergecast delay.