• 한국산업정보학회논문지
• /
• 제6권3호
• /
• pp.20-28
• /
• 2001

본 논문에서는 웜홀 스위칭 방식을 이용하는 메쉬 구조를 갖는 네트워크에서 경로를 기반으로 하는 효율적인 다중전송 알고리즘을 제안한다. 제안한 다중전송 알고리즘은 웜홀 스위칭 방식의 경로 기반 다중전송이 갖는 특성을 이용하고, 종래의 하나의 해밀톤 경로만 이용한 알고리즘의 단점을 극복한다. 제안한 다중전송 알고리즘은 2개의 각 가상채널에 해밀톤 경로를 사용하여 다중전송 메시지가 트래픽의 양에 따라 임의의 해밀톤 경로를 선택하여 전송하기 때문에 기존의 단일 해밀톤 경로를 사용한 방법보다 링크를 보다 효율적으로 사용하여 전반적인 성능을 향상시킨다. 그리곤 본 논문에서 제안한 다중전송 알고리즘이 교착 상태가 없음을 증명하고 기존의 방법에 비해서 약 15∼20%의 성능 향상을 보임을 시뮬레이션을 통하여 검증하였다.

• Journal of Construction Engineering and Project Management
• /
• 제6권2호
• /
• pp.30-39
• /
• 2016

This research presents the development of a self-governing mobile robot navigation system for indoor construction applications. This self-governing robot navigation system integrated robot control units, various positioning techniques including a dead-reckoning system, a UWB platform and motion sensors, with a BIM path planner solution. Various algorithms and error correction methods have been tested for all the employed sensors and other components to improve the positioning and navigation capability of the system. The research demonstrated that the path planner utilizing a BIM model as a navigation site map could effectively extract an efficient path for the robot, and could be executed in a real-time application for construction environments. Several navigation strategies with a mobile robot were tested with various combinations of localization sensors including wheel encoders, sonar/infrared/thermal proximity sensors, motion sensors, a digital compass, and UWB. The system successfully demonstrated the ability to plan an efficient path for robot's movement and properly navigate through the planned path to reach the specified destination in a complex indoor construction site. The findings can be adopted to several potential construction or manufacturing applications such as robotic material delivery, inspection, and onsite security.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1232-1239
• /
• 2009

This paper proposes an exploration strategy to efficiently find a specific place in large unknown environments with wall-following based path planning. Many exploration methods proposed so far showed good performance but they focused only on efficient planning for modeling unknown environments. Therefore, to successfully accomplish the room finding task, two additional requirements should be considered. First, suitable path-planning is needed to recognize the room number. Most conventional exploration schemes used the gradient method to extract the optimal path. In these schemes, the paths are extracted in the middle of the free space which is usually far from the wall. If the robot follows such a path, it is not likely to recognize the room number written on the wall because room numbers are usually too small to be recognized by camera image from a distance. Second, the behavior which re-explores the explored area is needed. Even though the robot completes exploration, it is possible that some rooms are not registered in the constructed map for some reasons such as poor recognition performance, occlusion by a human and so on. With this scheme, the robot does not have to visit and model the whole environment. This proposed method is very simple but it guarantees that the robot can find a specific room in most cases. The proposed exploration strategy was verified by various experiments.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.499-510
• /
• 2007

Shortest path tree(SPT) construction is essential in high performance routing in an interior network using link state protocols. When some links have new state values, SPTs may be rebuilt, but the total rebuilding of the SPT in a static way for a large computer network is not only computationally expensive, unnecessary modifications can cause routing table instability. This paper presents a new update algorithm, dynamic shortest path tree(DSPT) that is computationally economical and that maintains the unmodified nodes mostly from an old SPT to a new SPT. The proposed algorithm reduces redundancy using a dynamic update approach where an edge becomes the significant edge when it is extracted from a built edge list Q. The average number of significant edges are identified through probability analysis based on an arbitrary tree structure. An update derived from significant edges is more efficient because the DSPT algorithm neglect most other redundant edges that do not participate in the construction of a new SPT. Our complexity analysis and experimental results show that DSPT is faster than other known methods. It can also be extended to solve the SPT updating problem in a graph with negative weight edges.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.568-571
• /
• 2004

This paper presents an efficient 5-axis roughing method for centrifugal impeller. The efficient roughing is minimization of cutting time through minimizing tool tilting & rotating motions. Roughing tool path plan consists of the three steps. First, machining areas are divided into sub cutting regions using ruling lines. The biggest tool diameter is, then, determined for each region. Finally, tool paths are generated after fixing the tilting and rotating axis of 5-axis machine. Experimental results showed that the proposed roughing plan considering the divided machining regions is more efficient than the conventional methods.

• 한국CDE학회논문집
• /
• 제16권4호
• /
• pp.300-304
• /
• 2011

This paper proposes an approach to generate tool-path for laser pattern machining. Considering the mechanical structure of a laser pattern machine, it is quite similar to that of a 2D milling machine. Based on the observation, one may try to utilize the tool-path generation methodologies of 2D milling for the laser pattern machining. However, it is not possible to generate tool-path without considering the technological requirements of laser pattern machining which are different from those of 2D milling. In this paper, we identify the technological requirement of laser pattern machining, and propose a proper tool-path generation methodology to satisfy the technological requirements. For the efficient generation of tool-path, this paper proposes a tool-path element computation method, which is based on the concept of a monotone chain.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.51-54
• /
• 2005

This paper proposes an index structure which is used to process X-Path on S-XML data. There are many previous index structures based on tree structure for X-Path processing. Because of general tree index's top-down query fashion, the unnecessary node traversal makes heavy access and decreases the query processing performance. And both of the two query types for X-Path called single-path query and branching query need to be supported in proposed index structure. This method uses a combination of path summary and the node indexing. First, it manages hashing on hierarchy elements which are presented in tag in S-XML. Second, array blocks named path summary array is created in each node of hashing to store the path information. The X-Path processing finds the tag element using hashing and checks array blocks in each node to determine the path of query's result. Based on this structure, it supports both single-path query and branching path query and improves the X-Path processing performance.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1448-1456
• /
• 1999

In this paper, we propose a new technique for path-following of the wheeled mobile robot systems with nonholonomic constraints using a path-observer. We discuss the path-following problems of the nonholonomic mobile robot systems which have two nonsteerable, independently driven wheels with the various initial conditions such as a position, a heading angle, and a velocity. It is shown that the performance of dynamic path-following importantly is affected by the intial conditions. Particularly, if the initial conditions become more distant from the desired path and the desired velocity become faster, the system is shown to have worse performance and small time local stable. To find the controllable and stable control for path-following with various initial configuration, we propose the path-observer which can be used for control of the stable path-following of nonholonomic mobile robot system with the various initial conditions. The proposed scheme exhibits the efficient path-following properties for nonholonomic mobile robot in any intial conditions. The simulation results demonstrate the effectiveness of the proposed method for dynamic path-following tasks with the various initial conditions.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.361-366
• /
• 2006

실시간 여행경로에 대한 정보를 제공하기 위해 동적 최적경로탐색 시스템은 실시간 경로 탐색을 통해 대다수 사용자의 요구를 충족시키는 최적경로정보를 제공한다. 따라서 동적 최적경로탐색 시스템은 주기적으로 최적경로를 갱신하여야 하므로 짧은 시간에 최적경로를 탐색하여야 한다. 이를 위해 본 논문에서는 제한적인 탐색영역 설정기법을 사용하여 빠르고 효율적인 동적 경로탐색을 가능하게 하였다. 또한 본 연구에서는 저사양의 하드웨어로도 동적 경로탐색이 가능한 기법을 개발하였다. 대표경로를 사용한 탐색영역 설정 기법으로 갱신 주기에 따른 유효 탐색영역에 대한 최적해와 대표경로를 조합한 부분해를 사용하는 부분 탐색영역 설정기법을 제안하였다. 가상의 도로망에 적용한 결과 기존의 방법에 비해 최대 50% 정도의 좁은 탐색영역으로도 최적의 경로를 탐색할 수 있었다. 또한 이동거리에 상관없이 안정적인 탐색영역을 설정할 수 있어서 단거리 이동경로 탐색이 가능한 정도의 하드웨어 성능으로도 장거리 최적경로를 탐색할 수 있었다.

• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.233-241
• /
• 2013

무선 센서 네트워크에서 효율적인 대체 노드의 관리 및 유지 방법에 관한 문제는 매우 근본적인 문제 중 하나이다. 특히 계층적 클러스터에서 각 그룹 멤버 노드의 대체 기능이 가능한 노드(Alternative node)를 선정하여 임의 노드의 경로 단절시 대체 경로를 찾기 위해서는 대체 노드의 기능이 절차에 따라 실시간으로 경로를 복구 할 수 있어야 하며, 에너지를 최소화하여 네트워크를 유지 관리가 가능해야 한다. 본 논문에서 제안한 EEAP(Energy-Efficient Alternative Paths)는 이러한 양부 헤드 노드를 선정함에 있어서 에너지 잔량과 노드간의 거리등의 노드 속성 정보를 활용하여 각 경로에서 소모되는 비용과 노드의 관리에 있어 경비가 효율적인 경로의 대체 노드를 제공하게 됨으로 효율적인 에너지 관리를 할 수 있게 되어 전체 네트워크의 유지 시간을 향상 시킬 수 있는 결과를 보여주었다.