• Steel and Composite Structures
• /
• v.10 no.3
• /
• pp.207-222
• /
• 2010

Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second-order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.15-22
• /
• 2020

The 4th industrial revolution and the rapid change in the data environment revealed technical limitations in the existing relational database(RDB). As a new analysis method for unstructured data in all fields such as IDC/finance/insurance, interest in graph database(GDB) technology is increasing. The graph database is an efficient technique for expressing interlocked data and analyzing associations in a wide range of networks. This study extended the existing RDB to the GDB model and applied machine learning algorithms (pattern recognition, clustering, path distance, core extraction) to detect new abnormal signs. As a result of the performance analysis, it was confirmed that the performance of abnormal behavior(about 180 times or more) was greatly improved, and that it was possible to extract an abnormal symptom pattern after 5 steps that could not be analyzed by RDB.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2007

As the number of public Web Services increases, there will be many services with the same functionality. These services. however, will vary in their QoS properties, such as price, response time and availability, and it is very important to choose a best service while satisfying given QoS constraints. This paper brings parallel branching and response time constraint of business processes into focus and investigates several service selection plans based on multidimensional multiple choice Knapsack model. Specifically. proposed in the paper are a plan with response time constraints for each execution flow, a plan with a single constraint over the whole service types and a plan with a constraint on a particular execution path of a composite Web Services. Experiments are conducted to observe the performance of each plan with varying the number of services, the number of branches and the values of response time constraint. Experimental results show that reducing the number of candidate services using Pareto Dominance is very effective and the plan with a constraint over the whole service types is efficient in time and solution quality for small to medium size problems.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.131-137
• /
• 2007

Recently, Ant Colony Optimization (ACO) is emerged as a simple yet powerful optimization algorithm for routing and load-balancing of both wired and wireless networks. However, there are few researches trying to adopt ACO to enhance routing performance in WSN owing to difficulties in applying ACO to WSN because of stagnation effect. In this paper, we propose an energy-efficient path selection algorithm based on ACO for WSN. The algorithm is not by simply applying ACO to routing algorithm but by introducing a mechanism to alleviate the influence of stagnation. By the simulation result, the proposed algorithm shows better performance in data propagation delay and energy efficiency over Directed Diffusion which is one of the outstanding schemes in multi-hop flat routing protocols for WSN. Moreover, we checked that the proposed algorithm is able to mitigate stagnation effect than simple ACO adoption to WSN.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.43-53
• /
• 2013

In this paper research covers a study on the need for smart TV according to smart TV 'smart' of issues, consider the changing elements of paradigm, according to the evolution of TV, from the point of view of the user experience analyze the Applications of Smart TV UX. Through analysis of user behavior from the current viewpoint of the TV and Future TV, reflected in the design of Smart TV UX. Ultimately for efficiently operating the contents, screen proposed a prototype for personalized intelligent user based on UX design. Ultimately, to satisfy the playfulness for the course of using the TV as the primary goal and content through the TV content easily to the desired goal to be reached quickly and easily at the point of how to approach the user's destination, shorten the access path is proposed in this study.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.10
• /
• pp.30-37
• /
• 1998

An analog array with a 1.2 $\mu\textrm{m}$ double poly floating gate transistor has been developed with a standard CMOS fabrication process. The programming of each cell by means of an efficient control circuit eliminates the unnecessary erasing operation which has been widely used in conventional analog memories. It is seen that the path of the signal for both the programming and the reading is almost exactly the same since just one comparator supports both operations. It helps to eliminate the effects of the amplifier input-offset voltage problem on the output voltage for the read operation. In the array, there is no pass transistor isolating a cell of interest from the adjacent cells in the array. Instead of the extra transistors, one extra bias voltage, Vmid, is employed. The experimental results from the memory shows that the resolution of the memory is equivalent to the information content of at least six digital cells. Programming/erasing of each cell is achieved with no detectable disturbance of adjacent cells. Finally, the unique shape of the injector structure in a EEPROM is adopted as a cell of analog array. It reduces the programming voltage below the transistor breakdown voltage without any special fabrication process.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.2
• /
• pp.71-81
• /
• 2015

In the EISC processor, the Instruction Queue (IQ) supporting LERI folding and loop buffering occupies roughly 20% of real estate, and its efficient utilization is a key for performance. This paper presents an architectural enhancement for the IQ utilization with return address stack (RAS) in the EISC processor. The proposed architecture eliminates the RAS corruption from the wrong-path, taking advantage of shallow pipeline. In experiments, a 4-entry RAS reduces the number of IQ flushes by up to 58.90% over baseline, and an 8-entry RAS by up to 61.28%. The experiments show up to 3.47% performance improvement with 8-entry RAS and up to 3.15% performance improvement with 4-entry RAS.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2011

Wireless mesh network technology with transmission speeds similar to wired and wireless technology means to build, compared with wired networks, building a more efficient network to provide convenience and flexibility. The wireless mesh network router nodes in the energy impact of the mobility is less constrained and has fewer features entail. However, the characteristics of various kinds due to network configuration settings and the choice of multiple paths that can occur when the system overhead and there are many details that must be considered. Therefore, according to the characteristics of these network routing technology that is reflected in the design and optimization of the network is worth noting. In this paper, a multi-path setting can be raised in order to respond effectively to the problem of the router node data loss and bandwidth according to traffic conditions and links to elements of the hop count evaluation by using a genetic algorithm as a workaround for dynamic routing the routing metric for wireless mesh network scheme is proposed.

• KIEAE Journal
• /
• v.11 no.2
• /
• pp.75-82
• /
• 2011

In Korea, the ratio of population in urban areas used to be only 50.1% in 1970, but with the value risen to 90.8% in 2009, urbanization is going on rapidly. Urbanization, which occurs by the rampantly planted buildings, has become major source of raising building density, changing wind direction and reducing wind amount, and such reductions are affecting even inside the building. In each year, among the total energy consumption in Korea, residential portion takes up significant ratio, and specifically the ratio of apartment house is shown to be highest. In order to solve such problem, many studies are being conducted for the improvement of natural ventilation performance. The natural ventilation performance of apartment house are significantly determined by the characteristics of external and internal structure, but in macroscopic perspective, the performance is established fundamentally by the layout characteristics of the main building of the apartment house in preparation for wind conditions. So far researches on raising the thermal comfort through elevation of ventilation performance have been conducted actively, but many of them propose only theoretical concepts deduced through wind path analysis, and do not include any indicator to measure ventilation performance simply only with area data from layout planning stage. Therefore, in this study, gap ratio a wind field measuring indicator was developed, and after the ventilation characteristics by layout types and main building uniformity were identified, the scope of gap ratio efficient for ventilation and that of uniformity were clarified, followed by verification through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1395-1404
• /
• 2000

In this paper, we propose a heuristic wavelength routing algorithm for IP datagrams in WDM (Wavelength-Division Multiplexing) networks which operates in a distributed manner, while most previous works have focused centralized algorithms. We first present an efficient construction method for a loose virtual topology with a connectivity property, which reserves a few wavelength to cope with dynamic traffic demands properly. This connectivity property assures that data from any source node could reach any destination node by hopping one or multiple lightpaths. We then develop a high-speed distributed wavelength routing algorithm adaptive to dynamic traffic demands by using such a loose virtual topology and derive the general bounds on average utilization in the distributed wavelength routing algorithms. Finally, we show that the performance of the proposed algorithms is better than that of the FSP(Fixed Shortest-Path) wavelength routing algorithms through simulation using the NSFNET[1] and a dynamic hot-spot traffic model, and that the algorithms is a good candidate in distributed WDM networks in terms of the blocking performance, the control traffic overhead, and the computation complexity.