• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.49-54
• /
• 2008

In this paper, the power added efficiency(PAE) of class F power amplifier is improved by applying a new Photonic Bandgap (PBG) structure on the output of amplifier. The proposed spiral PBG structure is a two-dimensional (2-D) periodic lattice patterned on a dielectric slab that does not require nonplanar fabrication process. This structure bas higher suppression performance at second harmonic. Also, It has a sharp skirt property. This new PBG structure can be applied with class F power amplifier for efficiency improvement. We obtained the PAE of 73.62 % for CDMA applications, and the PAE performance is improved as much as 6.2 % compared with that of a conventional class F power amplifier.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.7
• /
• pp.1823-1840
• /
• 2023

In order to improve spectral efficiency and reduce power consumption for reconfigurable intelligent surface (RIS) assisted wireless communication systems, a joint design considering irregular RIS topology, RIS on-off switch, power allocation and phase adjustment is investigated in this paper. Firstly, a multi-dimensional variable joint optimization problem is established under multiple constraints, such as the minimum data requirement and power constraints, with the goal of maximizing the system energy efficiency. However, the proposed optimization problem is hard to be resolved due to its property of nonlinear nonconvex integer programming. Then, to tackle this issue, the problem is decomposed into four sub-problems: topology design, phase shift adjustment, power allocation and switch selection. In terms of topology design, Tabu search algorithm is introduced to select the components that play the main role. For RIS switch selection, greedy algorithm is used to turn off the RISs that play the secondary role. Finally, an iterative optimization algorithm with high data-rate and low power consumption is proposed. The simulation results show that the performance of the irregular RIS aided system with topology design and RIS selection is better than that of the fixed topology and the fix number of RISs. In addition, the proposed joint optimization algorithm can effectively improve the data rate and energy efficiency by changing the propagation environment.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.380-385
• /
• 2004

The efficiency of complex slurry preparation route for developing the high performance SiC matrix of RS-SiCf/SiC composites has been investigated. The green bodies for RS-SiC materials prior to the infiltration of nw/ten silicon were prepared with various C/SiC complex matrix slurries, which associated with both different sizes of starting SiC particles and blending ratios of starting SiC and carbon particles. The characterization of RS-SiC materials was examined by means of SEM, TEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, process optimization methodology is also discussed. The flexural strength of RS-SiC materials greatly depended on the content of residual Si. The decrease of starting SiC particle size in the C/SiC complex slurry was effective for improving the flexural strength of RS-SiC materials.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.13 no.2
• /
• pp.35-43
• /
• 2014

Under the influence of birth control and rapid urbanization, China's rural school-age population is on a year-by-year decrease, which has led approximately 300 thousand middle and primary schools to idleness ever since 2000. A majority of these idle schools are located in rural areas, almost one half remaining idle due to vagueness in property right. The disposed schools are less efficient for not being combined with the real situation of rural areas. Based on the opportunity of coordinative development of urban-rural areas, this paper analyzes the situationsin terms of the development of public service facilities and the gap between rural and urban areas over the recent years. Then the effective and sustainable reuse scheme to dispose of the idle schools and reshape them into the facilities for the elders, cultural facilities and medical facilities is proposed from the perspectives of perfecting rural public service facilities and guaranteeing citizens' equal share of public service, which both maintains the public nature of the idle schools, reconciles the fuzzy property right, and boosts efficiency of reuse, saves resources, and reduces investment for perfecting rural public facilities.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.62-69
• /
• 1998

We demonstrated the character display unit using a binary phase hologram array and a liquid crystal-spatial light modulator (LC-SLM). It combines the dynamic property of the LC-SLM with the high-efficiency property of the phase hologram fabricated by photolithography. Experimental results of the proposed unit are presented. The character display unit proposed in this paper has a fundamental and important meaning as new method displaying images by using light, and it will be used in optical information processing and optical communications fields.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.738-750
• /
• 1994

The load-sensing hydraulic system which was developed to improve energy efficiency of conventional hydraulic systems has its own properties. The instability of system responses, linearity of a servo valve, robustness for variation of external load, and dynamic interference between hydraulic motors are such properties which have much to do with control properties of the system. The load-sensing hydraulic system has instability tendancy because the load-sensing mechanism makes a positive feedback loop between the motor part and the pump part. A flow property of the servo valve can be said to be linear because the flow through the valve has nothing to do with a load pressure and the flow is strictly proportional to a valve opening which is adjusted by a valve command signal. The resultant control property can be said to be robust because the steady-state control performance is independent to the load actuated on the motor shaft. In the case when one pump simultaneously drives more than two hydraulic motors, the pump outlet pressure is determined by a hydraulic motor of the largest load pressure among all of the hydraulic motors, and, thus, the other motors are dominated by the largest load pressure. That is, the other motors can be said to be interfered by the motor of the largest load pressure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1648-1672
• /
• 2020

There are several types of image registration in the sense of stitching separated images that overlap each other. One of these is feature-based registration by a common feature descriptor. In this study, we generate a mosaic of images using feature-based registration for drone aerial images. As a feature descriptor, we apply the scale-invariant feature transform descriptor. In order to investigate the authenticity of the feature points and to have the mapping function, we employ the sample consensus method; we consider the sensed image's inherent characteristic such as the geometric congruence between the feature points of the images to propose a novel hypothesis estimation of the mapping function of the stitching via some optimally chosen initial candidate inliers in the sample consensus method. Based on the experimental results, we show the efficiency of the proposed method compared with benchmark methodologies of random sampling consensus method (RANSAC); the well-ordering property defined in the context and the extensive stitching examples have supported the utility. Moreover, the sample consensus scheme proposed in this study is uncomplicated and robust, and some fatal miss stitching by RANSAC is remarkably reduced in the measure of the pixel difference.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.907-912
• /
• 2007

Ion exchange resin was used to remove silica ion at ultralow concentration. The effects of temperature, type of ion exchange resin and single/mixed-resin systems on removal efficiency were estimated. As temperature increased, the slope of concentration profile became stiff, and the equilibrium concentration was higher. In the single resin system, the removal of silica was continued up to 400 min, but the silica concentration was recovered to initial concentration after 400 min due to the effect of dissolved $CO_2$. In the mixed-resin system it took about 600 min to reach equilibrium. Because of faster cation exchange reaction than anion exchange reaction, the effect of $CO_2$ could be removed. Based on the experimental results carried out in the mixed-resin system, the selectivity coefficients of silica ion for each ion exchange resin were calculated at some specific temperatures. The temperature dependency of the selectivity coefficient was expressed by the equation of Kraus-Raridon type.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2219-2228
• /
• 2000

Caches in a multiprocessing environment introduce the cache coherence problem. When multiple processors maintain locally cached copies of a unique shared-memory location, any local modification of the location can result in a globally inconsistent view of memory. Cache coherence protocols are important to operate a shared-memory multiprocessor system with efficiency and correctness. Since random testing and simulations are not enough to validate correctness of protocols, it is necessary to develop efficient and reliable verification methods. In this appear we present our experience in using VIS (Verification Interacting with Synthesis), a tool of formal method, to analyze a number of property of a cache coherence protocol, RACE (Remote Access Cache coherent Enforcement).

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.6
• /
• pp.644-655
• /
• 2012

As soon as a new air filter is applied to an air purification process, the filter gets loaded with dust particles. Thus, the study on the particle loading characteristics of air filter is very essential in order to understand the real filtration phenomena during filter use. In this study, we investigated the effect of particle and filter charge on the particle loading property of air filter. Charged filter and uncharged filter prepared by discharging the charged filter by isopropyl alcohol were used as test samples, and three types of particle having different charge states were supplied to filters tested. For neutralized particles there was a big difference in areal mass loading rates between charged and uncharged filters due to the very small amount of particle charge, on the other hand the difference was diminished for atomized particle and finally almost vanished for corona charged particles. The pressure drop of filter loaded with corona charged particles was only half of those for neutralized and atomized particles at the same areal mass loading because of the porous structure of particle deposit formed on filter fibers, caused by the space charge effect between particles.