• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.701-708
• /
• 1998

This paper presents a novel non-resonant PWM DC-DC converter for X-ray high-voltage power generator using the parasitic impedances of the high-voltage high-frequency link transformer with its output high-voltage control scheme and steady-state characteristics compared to the conventional series-parallel resonant DC-DC converter. The key point of this approach is to evaluate effectiveness of reduction of the turn ratio of the high-voltage high-frequency transformer on improvements in power conversion efficiency and the power factor applying a boost AC-DC converter as DC voltage source, especially in the long exposure term and light output load ranges.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.340-344
• /
• 1986

This paper shows that we can design a vector-coordinate rotation processor and obtain the approximate evaluations of sine and cosine based upon the use of residue number systems. The algorithm results in the considerable improvement of the computation speed when compared to CORDIC algorithm. The results from computer simulation show that the mean error of sine and cosine is 0.0025 and the mean error of coordinate rotation arithmatic is 0.65. Also, the proposed processor has the efficiency for the design and fabrication of integrated circuit, because it consists of the array of idecntially structured look-up tables.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.345-350
• /
• 1986

This paper deseribes the design of a vector-coordinate rotation processor and the apporoximate evaluations of sine and consine based upon the use of residue number systems. The proposed algorithm results in a considerable improvement of computational speed as compared to the CORDIC algorithm. According to the results of computer simulation, the mean error of sine and cosine is 0.0025, and the mean error of coorcinate rotation arithmatic is 0.65. The proposed processor has the efficiency for the design and fabrication of integrated circuits, because it consists of an array of identical lookup tables.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.289-290
• /
• 2023

According to relevant laws, in the case of a construction project with a total construction cost of 30 billion won or more, a post-construction evaluation must be performed after completion. In addition, a post-construction evaluation report must be prepared and entered into the Continuous Acquisition & Life-cycle Support(CALS). As a result of reviewing the currently accumulated post-construction evaluation reports, since the report is not standardized, it is difficult for public project owners to write the report. It also hinders the post-construction evaluation and management center from verifying contents, analyzing data, and deriving meaningful results. In order to improve the convenience of the public owners who must conduct post-construction evaluations and the work efficiency of the center, evaluation factors were standardized and a standard post-construction evaluation report format for road construction was developed in Excel. Through this, the data in the reports will be effectively accumulated, managed, and analyzed, so that meaningful results will be produced and be helpful in future construction work.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.343-352
• /
• 2018

The objective of this study is to investigate the market of fitness compression wear as well as to design an optimal fitness compression wear by analyzing the muscle and movement characteristics of the elderly women in Korea. In this regard, research for functional garments is needed to increase muscle activity of elderly people during physical exercise. Firstly, we investigated the brand, design, size, material, and pattern of fitness wear based on the market survey. Secondly, we identified preference, evaluation items, evaluation method, and pattern design method based on the literature review. Finally, in addition, the motion type, range, angle to improve the muscle strength of the elderly were investigated and the maximum muscle strengths of each motion were analyzed by using 2007 Size Korea data (n = 386). It is also designed for muscle fatigue through exercise and rapid fatigue recovery after exercise. The evaluation methods for fitness compression wear were classified as motor functionality, physiological comfort, pattern and material suitability evaluations. The muscle strength at leg (pushing force) and waist (lifting force) of the ages of 60 to 69 years old showed 239.3 N and 274.5 N, respectively, which were the lowest forces compared to younger age groups. By applying these results to the design process of fitness wear, it is anticipated that the fitness wear will have a proper fit to the body shape of elderly people in South Korea as well as it can increase muscle efficiency to promote physical capability and healthy life for senior people.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.2
• /
• pp.108-120
• /
• 2002

This study analyzed the managerial efficiency of 11 organizations, the branch centers of a occupational health service organization in Korea, using the Data Envelopment Analysis (DEA) method. The DEA is a good method for evaluating health services since it can handle multiple inputs and outputs simultaneously, and also identify the sources and amount of inefficiency. The author approached this study using two efficient models: the monetary value model and the real value model. The DEA method based on the monetary value model included cost factors, while the real value model excluded cost factors. The input variables used were manpower of physicians, medical technicians, nurses, industrial hygienists and administrators; labor, maintenance, and material expenses. The output variables used were the number of medical examinations, workplace evaluations, group health management services and income from each service. The major results were as follows: First, in the monetary value model, 6 out of 11 organizations (54.6%) showed an efficiency score of 1.0, which means that they have been operating in very efficient ways. However, 5 organizations (46.4%) showed themselves to be relatively inefficient. Second, in the real value model, 7 out of 11 organizations (63.4%) showed an efficiency score of 1.0, which means they have been operating efficiently, while 4 organizations (46.4%) showed themselves to be relatively inefficient. Third, the reliability of DEA method were analyzed by comparing the results of the monetary value model and real value model. The results of 8 out of 11 organizations were same in terms of being efficient or not. Thus, the DEA could be a valid application method for occupational health service organizations. Fourth, the organizations that displayed common inefficiency in both the monetary value model and in the real value model 3, 9, and 10, were also considered to be managed inefficiency from expertise opinion. In summary, this study evaluated the efficiency of occupational health service organizations applying the DEA method with different variables, and found that the results of analysis could be valid in terms of both modeling and expert sense. In the future, the DEA method will be used as a useful tool to identify and evaluate the efficiency of occupational health service organizations through more applications and refinements.

• Ecology and Resilient Infrastructure
• /
• v.4 no.3
• /
• pp.142-148
• /
• 2017

Nitrogen and phosphorus are key factors in causing eutrophication of water body. In this study, ceramics media was selected to increase the removal efficiency of nitrogen and phosphorus. We designed vertical, horizontal flow constructed wetlands to create aerobic and anaerobic flow conditions by using the media, then proceeded to performance evaluations after acrylic reactors were produced. In the case of vertical and horizontal flow constructed wetlands, we measured oxygen concentrations to evaluate aerobic and anaerobic conditions. we got the result of 2.7 mg/L in the aerobic condition, N.D in the anaerobic condition respectively, which suited our purpose. The result of the combined vertical and horizontal flow condition showed that the removal efficiency of SS was 94%, 91%, 61% at 140 min, 80 min, 60 min of running times, respectively, and the removal efficiency of T-P was 84%, 71%, 63% during each running time. In case of T-N, the removal efficiency was 63%, 49%, 42% during each running time. We found that the reactor exerted better removal efficiency when in the short time compared to 12 - 24 hr residence time of existing wetlands. In this study, we conducted experiments to explore functional effects after applying combined vertical and horizontal flow methods in the field. Further study will be carried out to identify its mechanism and administrative perspective.

• Clean Technology
• /
• v.23 no.2
• /
• pp.181-187
• /
• 2017

The perfluorocompounds (PFCs) emitted from the semiconductor and display manufacture is treated by abatement systems which use various technologies, such as combustion, thermal, plasma, catalyst. However, it is required that the system should overcome their drawbacks with excess energy consumption and low removal efficiency. The new technology using combination of pressure swing adsorption and excess enthalpy combustion for the reduction of PFCs emissions were developed and analyzed its characteristics. PFCs concentration ratio and PFCs loss factor were calculated from measuring concentration of PFCs at the calculated by comparing concentration of PFCs at the combustor's inlet and outlet. There were performance evaluations with various gas flow for comparing energy consumption and removal efficiency with existing equipments. The concentration ratio and the loss factor of PFCs were 1.65, 8.2%, respectively, when the total gas flow of the pressure swing absorption (PSA) inlet was 204 liter per minute (LPM) and $CF_4$ concentration was 1412 ppm. In comparison with existing system at constant condition, $CF_4$ removal efficiency for a porous media combustion (PMC) showed the improvement more than 16% and the consumed energy was also reduced up to approximately 41%. Then, the total gas flow introduced into PMC and $CF_4$ concentration were 91-LPM and 2335 ppm, respectively, and the destruction and removal efficiency of $CF_4$ was about 96% at 19-LPM $CH_4$, and 40-LPM $O_2$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.259-264
• /
• 2012

Automatic magnetic abrasive polishing (MAP), which can be applied after machining of a mold on a machine tool without unloading, is very effective for finishing a free-form surface such as a complicated injection mold. This study aimed to improve the efficiency of MAP of a non-ferrous mold surface. The magnetic array table and control of the electromagnet polarity were applied in the MAP of a free-form surface. In this study, first, the magnetic flux density on the mold surface was simulated to determine the optimal conditions for the polarity array. Then, the MAP efficiency for polishing a non-ferrous mold surface was estimated in terms of the change in the radius of curvature and the magnetic flux density. The most improved surface roughness was observed not only in the upward tool path but also in the working area of larger magnetic flux density.