• 생물환경조절학회지
• /
• 제19권4호
• /
• pp.392-396
• /
• 2010

본 연구는 하이부쉬 블루베리(Vaccinium corymbosum) 'Jersey' 품종을 이용하여 적방 1/3, 적방 1/3 +적화 1/2, 적방 2/3 및 적방 2/3 + 적화 1/2처리 후 무처리 과실의 수확량과 과실 품질을 조사하여 적방 적화 정도에 따른 수량과 과실 크기, 가용성당함량, 산함량, 과실 경도를 분석하였다. 적방 적화 처리는 과립중, 종경 및 횡경에 유의한 과립 비대효과를 가져왔다. 과실 수확량은 무처리와 적방 1/3 처리구에서 가장 높았으며, 그 이외의 처리에서는 과립비대는 이루어졌으나 수확량의 감소가 발생하였다. 무처리와 적방 1/3 처리의 경우 전체 수확량은 비슷하였으나, 적방 1/3 처리구에서는 상품성이 큰 대립의 과실이 차지하는 비율이 무처리에 비해서 큰 것으로 조사되었다. 가용성당함량은 적방과 적화 처리에 따라 수량이 감소한 적방 2/3, 적방 2/3 + 적화 1/2 처리구에서 유의하게 증가하였으나, 산함량과 경도에는 영향을 미치지 않았다. 적방 적화에 따른 영향은 과립 비대와 수량에 유의한 차이를 주었으나 과실품질에는 크게 영향을 미치지 않는 것으로 조사되었다.

• 한국산림과학회지
• /
• 제96권6호
• /
• pp.742-749
• /
• 2007

본 연구의 목적은 거리독립생장모델을 이용한 잣나무 임분의 간벌효과 분석모델을 개발하는데 있다. 이 모델은 간벌시업계획의 주요 인자로 간벌의 횟수와 시기, 강도 그리고 간벌방법을 고려할 수 있도록 설계되었다. 개발된 모델의 적용성 검토를 위해 간벌시업계획에 따른 7개의 시나리오를 작성하여 임분생장 효과를 분석하였다. 연구결과, 개발된 모델을 이용하여 간벌시업 형태에 따른 개체목의 직경급별 본수, 수고, 재적과 임분의 평균흉고직경, 평균수고, ha당 본수 및 재적변화에 관한 생장을 예측할 수 있었다. 1개소의 잣나무 현실임분을 대상으로한 모델의 적용성 검토에 있어서, 간벌시나리오별 임분생장량을 비교한 결과, 간벌시업에 의한 임분밀도조절로 주벌시점의 재적량 증가효과를 기대할 수는 없는 것으로 나타났다. 그러나 간벌량과 주벌량을 포함하는 총수확량은 무간벌의 경우보다 간벌시업을 한 경우에 ha당 약 $40{\sim}75m^3$의 증가효과를, 그리고 임분의 평균흉고직경에서는 5 cm이내, 평균 수고에서는 1 m이내의 증가효과를 보였다. 본 연구를 통해 개발된 모델은 현실임분의 구성여건에 따라 간별의 실시 여부 및 간벌시업체계의 선택문제를 결정하는 의사결정지원도구로서 활용가능 할 것이다.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.51-58
• /
• 2007

This study on the effects of local wall-thinned location on the fracture behavior of pipes was carried out, and the results were compared with the analytical results. Local wall-thinning for the bending test was machined with various sizes on the outside of pipes, in order to simulate the metal loss, due to erosion/corrosion. In addition, we had carried out FE analysis for the pipes with local wall thinning on the inside, and its results were comparatively studied with that of the outside. Three-dimensional elasto-plastic analyses were able to accurately simulate fracture behaviors of inner or outer wall thinning. Fracture types, obtained from the experiments and analyses, could be classified into ovalization, local buckling and crack initiation, depending on the thinned length and thinned ratio. Based on the results, the fracture behaviors of pipes with the outer wall thinning can be applied to estimate the fracture behaviors of pipes with the inner wall thinning.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.8-17
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear Power Plant. In Pipes of energy Plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization. crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strength and the allowable limit of piping system with local wall thinning were evaluated.

• 한국전산유체공학회지
• /
• 제17권3호
• /
• pp.33-38
• /
• 2012

The droplet ejection behavior from drop-on-demand printhead are investigated numerically for Newtonian and shear-thinning fluid. The numerical simulation is performed using a volume-of-fluid model. In this study, we compare the printable range in terms of Z number and pinch-off time for Newtonian and shear-thinning fluids. The printability range are found to be 1.08 $$\leq_-$$ Z $$\leq_-$$ 12.9 for Newtonian fluid and 0.8 $$\leq_-$$ Z $$\leq_-$$ 12.9 for shear-thinning fluid. However, air entrainment is observed during merging of primary and satellite droplet within the printability range. The pinch-off time of the shear-thinning fluid is apparently shorter compared to the corresponding Newtonian fluid due to shear-thinning effects and the differences in the pinch-off time is enlarged significantly when the capillary number is larger than 0.5.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.299-304
• /
• 2008

This paper presents plastic limit loads of piping branch junctions with local wall thinning under combined pressure and in-plane bending, based on systematic three-dimensional finite element limit analyses using elastic-perfectly plastic materials. An ideal branch junction without weld or reinforcement around the intersection is considered with two locations of wall thinning; one in the run pipe, and the other in the branch pipe. Based on FE results, effects of thinning geometries on plastic limit moments are quantified and simple approximations of plastic limit loads are proposed.

• Journal of Ecology and Environment
• /
• 제48권2호
• /
• pp.137-143
• /
• 2024

Background: The study was carried out to analyze the temporal changes of trade-offs (TOs) between two ecosystem services (ESs) before and after thinning in a Pinus koraiensis plantation on Mt. Gari from 2006 to 2021. As target variables, aboveground carbon (AGC) storage and species richness (SR) were chosen for regulating and supporting services. Thinning was applied from 2007 through 2008 with three treatments: 1) light thinning (LT), 2) heavy thinning (HT), and 3) control (Con). Results: Thinning influenced both AGC and SR. In 2021, AGC in the Con (111.1 t C ha^-1) was significantly higher compared to the LT (82.0 t C ha^-1) and HT (60.4 t C ha^-1) after thinning from 2007 to 2008. Also, SR was marginally higher in the LT (94 species) than in the Con (55 species) and HT (87 species) in 2011. Relative benefits of AGC and SR showed similar trends with the obtained values. In addition, the effects of thinning on TO varied among treatments and over time, demonstrating different degrees of TO between the two ESs. In the LT, TO was 0.13 in 2006 and slightly increased to 0.2 by 2021. TO in the HT exhibited a relatively rapid increase from 0.22 in 2006 to 0.58 by 2021, while To in the Con fluctuated, rising to 0.36 in 2011 from 0.1 in 2006 and decreasing to 0.25 by 2021. Among the three treatments, the degree of TOs between the two ESs was the lowest in the LT. Conclusions: Depending on thinning intensities, the responses of ESs and the degree of TOs vary. Regarding the balance between enhancements and TOs in ESs among treatments, the LT treatment showing intermediate carbon storage, higher SR, and lower TOs will be a proper silvicultural application.

• Journal of Ecology and Environment
• /
• 제29권6호
• /
• pp.495-501
• /
• 2006

간벌 후4년이 경과된 삼나무와 편백 채종원(제주도 서귀포시 상효동)을 대상으로 간벌 효과를 구명하고자 간벌 강도별(0, 20, 40, 60%)로 토양의 화학적 특성, 구과 및 종자 특성, ha당 종자 생산량, 그리고 종자와 구과 내 양분 함량 등을 조사하였다. 간벌 강도별로 토양 분석을 실시한 결과, 수종 간에는 통계적으로 유의적인 차이가 없었으나 편백 채종원에서는 전기전도도, 전질소, 그리고 칼륨 농도 등에서 간벌 강도에 따라 유의적인 차이(p<0.05)가 나타났으며, 삼나무 채종원에서는 칼슘 농도에서만 유의적인 차이(p<0.05)를 나타냈다. 한편, 편백 채종원에서는 간벌 강도가 강해질수록 구과 결실량이 많아졌으나(p<0.05), 삼나무 채종원에서는 간벌 강도에 따른 차이가 없었다. 아울러, 두 수종 모두 간벌 강도가 강해질수록 종자가 크고 무거워지는 경향을 보였으나 통계적인 유의차는 나타나지 않았다. 또한 ha당 종자 생산량에 있어서도 편백과 삼나무 채종원 모두 간벌 강도에 따라 고도의 유의성(p<0.01)이 인정되었다. 편백 채종원에서는 간벌 강도가 강해질수록 종자 생산량이 증가한 반면, 삼나무 채종원에서는 간벌 강도가 강해질수록 종자 생산량이 감소하는 경향을 보였다. 종자와 구과 내 양분 함량의 경우 두 수종 모두 간벌 강도에 따른 차이는 없는 것으로 나타났다.

• The Korean Journal of Ecology
• /
• 제27권6호
• /
• pp.363-367
• /
• 2004

Photosynthetically active radiation (PAR) beneath the forest canopy, understory species richness and diversity, and biomass were measured in a Larix leptolepis plantation seven years after thinning in Yangpyeong. Four different thinning intensities (control, $10\%,\;20\%\;and\;40\%$ stocking reduction) were applied in 1997. The current PAR values were lower than those measured four years after thinning, and PAR at the heavy thinning plots was significantly higher than that of other thinning intensities. A total of 23 species including 9 tall-trees and 14 shrubs were found for the high layer while a total of 82 species including 10 tall-trees, 29 shrubs, and 43 herbs for the low layer. Species richness and diversity generally increased with thinning intensities, and the trends were more evident for the low layer. Aboveground biomass significantly differed among thinning intensities for both shrubs and herbs. Also there was a negative correlation between biomass and the current number of stems per hectare. The current study suggested that the effects of thinning on light conditions at the forest floor, species richness and diversity and production of understory vegetation continued seven years after the treatment.

• Journal of Ecology and Environment
• /
• 제46권1호
• /
• pp.85-98
• /
• 2022

Background: Korean white pine (Pinus koraiensis) is a major commercial species, and the importance of the oak trees (Quercus spp.) is increasing due to various factors such as environmental and ecological values. However, more information is required to clearly understand the growth characteristics of these species especially regarding thinning intensity. This study was performed to provide the basic information to develop the silvicultural guideline and field manual by analyzing tree and stand characteristics in line with thinning intensity in the Korean white pine plantation and oak-dominated natural deciduous forest. Results: Diameter at breast height (DBH) and volume changes by the thinning intensity in the Korean white pine plantation were significantly different from those in the oak-dominated deciduous natural forest. In particular, DBH distribution in the pine stand appeared that there were more large diameter trees as the thinning intensity was higher. DBH periodic annual increment (PAI) of the pine stand was higher as the thinning intensity was stronger and the growth period was shorter. This trend was similarly shown in the natural deciduous forest, but the amount of PAI was smaller than in pine stand. The volume PAI after thinning was not decreased over time. In each stand type, the PAI tended to be lower as stand density was higher. The volume PAI in the pine stand was significantly higher than that in the oak-dominated natural deciduous forest. Dead trees occurred the most in the unthinned plots of each stand type, and those were higher in the natural deciduous forest. Ingrowth trees were observed only in the natural deciduous forest, and its distribution was the lowest in unthinned plots; Korean white pine as ingrowth occurred the most frequently among many tree species. Conclusions: Different effects of thinning treatment on DBH and volume PAI, mortality, and ingrowth were observed for each stand. With respect to forest growth, Korean white pine plantation was superior to the oak-dominated natural deciduous forest. The results of this study offer fundamental information for the development of silvicultural guidelines for Korean white pine plantations and oak-dominated natural deciduous forests in Korea.