• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.531-541
• /
• 2013

This study was performed to investigate the antioxidant effect of Sansa (Crataegi fructus) extract in vitro, and to evaluate the functional effects of Sansa powder addition on the quality properties and storage characteristics of Tteokgalbi. Total polyphenol and flavonoid contents of Sansa extract were found to be 127.00 mg/g and 54.05 mg/g, respectively. The DPPH radical scavenging activity of Sansa extract was high and it was similar to the BHA and BHT. The Tteokgalbi was prepared by 0% (N), 0.1% (S1), 1% (S2), and 2% (S3) of the Sansa Powder. Addition of Sansa powder decreased the protein and lipid contents, but the ash content was significantly increased (p<0.05). Increasing the amount of Sansa powder in the pork Tteokgalbi tended to increase the water holding capacity (WHC) values and the cooking loss (p<0.05). The addition of Sansa powder increased the hardness and chewiness values, but did not affect the cohesiveness and springiness values. In the sensory evaluation, the S3 Tteokgalbi had the best score in color. Values of pH, total microbial counts, thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values decreased significantly added Sansa powder relative to the normal (p<0.05). The S3 Tteokgalbi was significantly (p<0.05) more effective for delaying lipid peroxidation than the other groups. Sansa powder addition increased the L (lightness) and a (redness) values. Therefore, the results demonstrate that adding the Sansa powder to the pork Tteokgalbi tended to improve antioxidative and antimicrobial effects during the chilled storage period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.10
• /
• pp.1225-1233
• /
• 2017

The aim of this study was to evaluate the microbial inhibitory activity and physicochemical quality of fresh carrot juice prepared with different environmentally-friendly washing methods during low temperature storage. Individual and combined treatments with sodium bicarbonate (baking soda, $NaHCO_3$) and citric acid were applied to carrots for 10 min. Tap water and 50 ppm of sodium hypochlorite (NaOCl) were used as the control. Combined treatment of 1% $NaHCO_3$ and 1% citric acid significantly reduced total aerobic counts and coliforms. In addition, combined treatment of 1% $NaHCO_3$ and 1% citric acid inhibited microbial growth for 7 days at $4^{\circ}C$ and $10^{\circ}C$ in a shelf-life study. There were no significant differences among the sanitizers in terms of $^{\circ}Brix$, acidity, pH, and color. Changes in physicochemical quality were not significantly different by sanitizer but were affected by storage temperature. These results indicate that washing with combined treatment of 1% $NaHCO_3$ and 1% citric acid is an effective method to inhibit the microbial population and maintain physicochemical quality. Therefore, combined treatment of 1% $NaHCO_3$ and 1% citric acid can be effectively used to sanitize and prepare carrot juice without affecting other properties.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.282-291
• /
• 1994

Optimal processing conditions and shelf-life of steamed kamaboko made from Alaska pollock surimi were investigated, including protein digestibility, computed protein efficiency ratio (C-PER), trypsin inhibitor content and protein solubility. Steamed kamaboko containing $5\%$ starch and $33\%$ water in pollock surimi showed the best protein quality in terms of C-PER and protein digestibility. Steaming could not give any significant advantage over kamaboko protein digestibility but a higher C-PER resulted from steamed kamaboko. All kamaboko products had trypsin content of 1.4 to $2.0mg\%$ which was $10\%$ of total trypsin inhibitor levels in frozen pollock meat. A two stage steaming process, the first at $40^{\circ}C$ for 20min followed by a second 10min steaming period at $95^{\circ}C$, was found to be the most effective way of the most effective heating process for kamaboko protein quality. C-PERs of marketed Korean surimi products ranged from $2.8{\sim}2.9$ for steamed kamaboko and $2.9{\sim}3.2$ for crab meat analog which were superior to ANRC casein(2.5). Measured protein digestibility of all products were ranged from 86 to $89\%$. VBN and protein solubility data suggest Korean marketed surimi products could have a shelf-life of 15 days at $4^{\circ}C$ for crab meat analog and 20 days at $4^{\circ}C$ for steamed kamaboko.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.269-276
• /
• 2005

This in vitro study evaluated the influence of a flowable composite resin on the tensile bond strength of resin to enamel and dentin treated with Er:YAG laser and diamond bur. 96 Buccal enamel and mid-coronal dentin were laser-irradiated using an Er:YAG laser and treated with diamond bur. Each groups(48) were divided two small groups depends on acid-etching procedure. Light-cure flowable resin(Metafil Flo) and self-cure resin(Clearfil FII New Bond) were used in this study. After surface etching with 37% phosphoric acid and the application of an adhesive system, specimens were prepared with a hybrid composite resin. After 24hours storage in distilled water at 37$^{\circ}C$, all samples were submitted to the tensile bond strength evaluation, using a universal testing machine(Z020, Zwick, Germany). The obtained results were as follows: 1. TBS of acid-etching group were higher than those of non-etching group in both enamel and dentin treated with Er:YAG laser and diamond bur. Laser 'conditioning' was clearly less effective than acid-etching. Moreover, acid etching lased enamel and dentin significantly improved the microTBS of M-Flo. 2. In enamel, TBS of laser-irradiated group were lower than those of bur-prepared group. However, in flowable resin subgroup, there were not differed those between two groups in dentin. 3. In laser-treated group, TBS of flowable composite resin were higher than those of self-curing resin in dentin, however, there was no difference in enamel. From this study, we can conclude that the self- and light-cure composite resin bonded significantly less effective to lased than to bur-cut enamel and dentin, and that acid-etch procedure remains mandatory even after laser ablation. We suggest that Er:YAG laser was useful for preparing dentin cavity with flowable resin filling.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.485-492
• /
• 2017

This study investigated to determine the microbial contamination levels of strawberries at harvest and distribution stages and to suggest a control measure for reducing the microbial contamination of strawberries by replacing worker's gloves used at harvest and distribution stages. According to the monitoring results, the contamination levels of total aerobic bacteria (TAB) were in the order of soil ($7.12{\pm}0.61{\log}_{10}CFU/g$), gloves ($6.06{\pm}1.80{\log}_{10}CFU/cm^2$), strawberry ($3.28{\times}0.98{\log}_{10}CFU/g$), and water ($3.08{\pm}0.55{\log}_{10}CFU/g$) at harvest stage. TAB of strawberry at was harvest stage reduced from $3.28{\pm}0.98{\log}_{10}CFU/g$ to $1.85{\pm}0.21{\log}_{10}CFU/g$ and $2.6{\pm}0.30{\log}_{10}CFU/g$ at cold and room temperature storage, respectively. By the replacement of worker's gloves and distribution temperature, TAB levels of the strawberries were significantly reduced when compared to those of the strawberries treated without replacement of worker's gloves and distributed at room temperature. For reusing the replaced gloves, washing with a commercial disinfectant, clorox, was effective to reduce microorganisms contaminated on the worker's gloves. These results demonstrated that appropriate replacement of gloves at the harvest and distribution stages is an effective method for reducing microbial contamination of fresh strawberries.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2021

As facilities such as dam reservoir wetlands and agricultural irrigation reservoir wetlands are built, sedimentation occurs over time through erosion, sedimentation transport, and sediment deposition. Sedimentation issues are very important for the maintenance of reservoir wetlands because long-term sedimentation of sediments affects flood and drought control functions. However, research on resignation has been estimated mainly by empirical formulas due to the lack of available data. The purpose of this study was to calculate and compare the sediment deposition rate by developing a multiple regression model along with actual data and empirical formulas. In addition, it was attempted to identify potential causes of collapse by applying it to 64 reservoir wetlands that suffered flood damage due to the long rainy season in 2020 due to reservoir wetland sedimentation and aging. For the target reservoir, 10 locations including the GaGog reservoir located in Miryang city, Gyeongsangnam province in South Korea, where there is actual survey information, were selected. A multiple regression model was developed in consideration of physical and climatic characteristics, and a total of four empirical formulas and sediment deposition rate were calculated. Using this, the error of the sediment deposition rate was compared. As a result of calculating the sediment deposition rate using the multiple regression model, the error was the lowest from 0.21(m³km²/yr) to 2.13(m³km²/yr). Therefore, based on the sediment deposition rate estimated by the multi-regression model, the change in the available capacity of reservoir wetlands was analyzed, and the effective storage capacity was found to have decreased from 0.21(%) to 16.56(%). In addition, the sediment deposition rate of the reservoir where the overflow damage occurred was relatively higher than that of the reservoir where the piping damage occurred. In other words, accumulating sediment deposition rate at the bottom of the reservoir would result in a lack of acceptable effective water capacity and reduced reservoir flood and drought control capabilities, resulting in reservoir collapse damage.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.315-324
• /
• 2015

In this study, we prepared liquid crystal emulsion composed of amphiphilic substance $C_{14-22}$ alcohol, $C_{12-20}$ alkyl glucoside, behenyl alcohol and studied liquid crystal emulsion of properties and in vitro skin permeation. The results of formulation experiments, the clear liquid crystalline structure was observed in the ratio of $C_{14-22}$ alcohol 0.8%, $C_{12-20}$ alkyl glucoside 3.2%, behenyl alcohol 4% in the formulation. The results of physical property measurements, the viscosity of liquid crystal emulsion and O/W emulsion applied as a control group was respectively $1871.26{\sim}1.15Pa{\cdot}s$, $1768.69{\sim}1.14Pa{\cdot}s$ and the shear stress of O/W emulsion was 178.68 ~ 909.18 Pa, that of liquid crystal emulsion was 190.45 ~ 919.38 Pa. The storage modulus of O/W emulsion was 3428.53 ~ 9157.45 Pa, that of liquid crystal emulsion was 4487.82 ~ 8195.59 Pa. The tan (delta) value of O/W emulsion which means a ratio of viscosity to elasticity was 0.43 ~ 0.19, and that of liquid crystal emulsion was 0.23 ~ 0.25. The water content value on the skin for liquid crystal emulsion was significantly higher from 1 h to 6 h compared with that of O/W emulsion and the transepidermal water loss on the skin was significantly superior in skin moisture loss suppression from 30 min to 4 h compared with that of O/W emulsion. The results of skin permeation using glycyrrhizic acid, the result of skin permeation amount of liquid crystal emulsion for 24 h was $64.58{\mu}g/cm^2$, that of O/W emulsion was $37.07{\mu}g/cm^2$, that of butylene glycol solution was $41.05{\mu}g/cm^2$. Hourly permeability results, it is showed that skin penetration effect of the liquid crystal emulsion increases after 8 h. These results suggest that liquid crystal emulsions are effective for skin moisturizing effect and function as potential efficacy ingredient delivery system for the transdermal delivery.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.409-415
• /
• 2005

To control Phytophthora blight of red pepper biologically caused by Phytophthora capsici, we developed Trichoderma harzianum DYMC for commercial product. DYMC was storage at room temperature and was investigated their population every 3 months for 1 year. For investigating the dynamic population of T. harzianum in the pot soils, we applied powder and suspension applications with DYMC, and then investigated for 95 days. The efficacy of powder and suspension applications of DYMC for control of Phytophthora blight of red pepper and plant growth were investigated for 50 days in greenhouse experiment. The population of T. harzianum was decreased at the room temperature for 1 year but there was not statistically significance. After soil treated in the pot with DYMC, the population of Trichoderma spp. was the highest when DYMC powder at 5 g was applied to mix with pot soil, and the population was deceased significantly among treatment means as time goes by ($R^2=0.76$, F=10.5960, P=<.0001). Incidence of Phytophthora blight of, red pepper was significantly reduced among treatment means on 50th day after treated with DYMC ($R^2=0.82$, P=16.4758, P=<.0001). Disease control value was the highest at 62.5% when DYMC powder at 5 g was applied to mix with pot soil. No significant difference (P=0.05) of effects of plant and root growth showed by treated with DYMC on 60th day, except stem. Mixing the application of DYMC powder with soil to control Phytophthora blight of red pepper was greater than suspension application to dilute with water. DYMC could be used as an effective biocontrol agent to control Phythophthora blight of red pepper.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.511-519
• /
• 2008

Statement of problem: An incompatibility between the initiator systems of self-curing composite resins and light-curing adhesives was supposed recently. Purpose: The purpose of the study was to evaluate the influence of activators for self/dual bonding on dentin shear bonding strengths. Material and methods: Fifty human molars were divided into 5 groups. A flat dentin surface was created for each tooth. A self-curing composite resin (Luxacore) was bonded with the following adhesives (n = 10); One-Step, Prime&Bond NT, AdheSE, Prime&Bond NT and AdheSE were also used in combination with activators. Shear bond strengths were measured after 24 hours of water storage. The specimens were loaded in shear in the Instron until failure at a 1 mm/min crosshead speed. Data were compared using one-way ANOVA and Tukey HSD test (${\alpha}$= 0.05). Results: The dentin adhesive systems in order of decreasing median bond strength were One-Step > Prime&Bond NT with activator, AdheSE with activator > Prime&Bond NT, AdheSE. Among adhesives, One-Step had the highest bond strength. Prime&Bond NT with activator had higher bond strengths than Prime&Bond NT that was used alone, and so was AdheSE. Conclusion: Shear bond strengths were increased in Prime&Bond NT and AdheSE when these were used with activators comparing used without activators. But using activators was not effective clinically comparing One-Step.

• Korean Journal of Food Science and Technology
• /
• v.7 no.1
• /
• pp.37-42
• /
• 1975

The color intensity (Absorbance at 490nm) and the antioxidant effects of absolute and 90% ethanol extracts obtained from a Maillard-type browning reaction mixture (0. 5M glucose and 0. 5M glycine mixture, heated at $100^{\circ}C$) were determined. The color intensity of the absolute and 90% ethanol extracts were compared with the length of reaction time and the antioxidant effects of the extracts of both types were compared one another. The results obtained are as follows. 1. The color intensity of the absolute ethanol extracts remained almost unchanged as the browning reaction proceeded. The color intensity of the 90% ethanol extracts appeared to increase nearly in proportion to the length of reaction time. 2. The absolute and the 90% ethanol extracts seemed to possess significant antioxidant activity on the autoxidation of an edible soybean oil. which was kept at $45{\pm}0.5^{\circ}C$ for 21 days. It was noteworthy that the absolute ethanol extracts showed stronger antioxidant effects than those of the 90% ethanol extracts, which contained a far greater amount of brown-colored pigments. Since the PVs of the controls in both groups, after the end of the storage period, did not differ much from one another, the possibility of residual water playing some prooxidant role in the substrates containing the 90% ethanol extracts should be ruled out. Extracts of both types obtained at earlier stages of the brownig reaction demonstrated less but comparable antioxidant activity to that of extracts taken at later stages of the reaction. 3. The results of the present study appeared to suggest that the effective antioxidant compounds, produced in the Maillard-type browning reaction, were probably intermediate products such as reductones formed at fairly earlier stages of the browning reaction.