• Title/Summary/Keyword: effective size

Search Result 4,719, Processing Time 0.038 seconds

Variation of Effective SSD According to Electron Energies and Irradiated Field Sizes (전자선 에너지 및 조사야에 따른 유효선원 피부 간 거리 변화)

  • Yang, Chil-Yong;Yum, Ha-Yong;Jung, Tae-Sik
    • Radiation Oncology Journal
    • /
    • v.5 no.2
    • /
    • pp.157-163
    • /
    • 1987
  • It is known that fixed source to skin distance (SSD) cannot be used when the treatment field is sloped or larger than the size of second collimator in electron beam irradiation and inverse square law using effective ssd should be adopted. Effective SSDs were measured in different field sizes in each 6, 9, 12, 15 and 18MeV electron energy by suing NELAC 1018D linear accelerator of Kosin Medical Center. We found important parmeters of effective SSD. 1. Minimum effective SSD was 58.8cm in small field size of $6\pm6cm$ and maximum effective SSD was 94.9cm in large field size of $25\pm25cm$, with 6MeV energy. It's difference was 36.1cm. The dose rate at measuring point was quite different even with a small difference of SSD in small field $(6\times6cm)$ and low energy (6 MeV). 2. Effective SSD increased with field size in same electron energy. 3. Effective SSDs gradually increased with the electron energies and reached maximum at 12 or 15 MeV electron energy and decreased again at 18MeV electron energy in each identical field size. And so the effective SSD should be measured in each energy and field size for practical radiotherapy.

  • PDF

Measurement of effective thermal conductivity and permeability on aluminum foam metal (알루미늄 발포금속의 유효열전도도와 침투율의 측정)

  • 백진욱;강병하;김서영;현재민
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.11 no.2
    • /
    • pp.185-192
    • /
    • 1999
  • Effective thermal conductivities and pressure-drop-related properties of aluminum foam metals have been measured. The effects of porosity and cell size in the aluminum foam metal are investigated in detail. The porosity of the foam metal, considered in the present study, varies from 0.89 to 0.96 and the cell size from 0.65㎜ to 2.5㎜. The effective thermal conductivity is evaluated by comparing the temperature gradient of the foam metal with that of the thermal conductivity-known material. The pressure drop in the foam metal is measured by a highly precise electric manometer while air is flowing through the aluminum foam metal in the channel. The results obtained indicate that the effective thermal conductivities are found to be increased with a decrease in the porosity while the effective thermal conductivities ire little affected by the cell size at a fixed porosity. However, the pressure drop is strongly affected by the cell size as well as the porosity. It is seen that the pressure drop is increased as the cell size becomes smaller, as expected. The minimum pressure drop is obtained in the porosity 0.94 at a fixed cell size. A new correlation of the pressure drop is proposed based on the permeability and Ergun's coefficient for the aluminum foam metal.

  • PDF

The Construction and Application of Effective Coefficient for Aerosol Size Distribution

  • Lin, Tang-Huang;Liu, Gin-Rong;Chen, A.J.
    • Proceedings of the KSRS Conference
    • /
    • 2003.11a
    • /
    • pp.594-596
    • /
    • 2003
  • Due to the fact that the composition and variability of aerosols is considered rather complex, it is difficult to employ a simple and straightforward physical model in calculating the aerosol size distribution in the absence of actual data. This complicates the already difficult retrieval of various atmospheric parameters from remotely sensed data. Thus, the main purpose of this study is trying to find an effective aerosol size coefficient that is stable, and can depict the particle size distribution. This paper also attempts to construct an 'effective aerosol size coefficient' database for each respective season, where it can quickly and effectively supply pertinent information of the atmosphere's opacity.

  • PDF

An Analytical Study on Prediction of Effective Elastic Constants of Perforated Plate

  • Lee Jae-Kon;Kim Jin-Gon
    • Journal of Mechanical Science and Technology
    • /
    • v.19 no.12
    • /
    • pp.2224-2230
    • /
    • 2005
  • In this study, the validity of the Eshelby-type model for predicting the effective Young's modulus and in-plane Poisson's ratio of the 2-dimensional perforated plate has been investigated in terms of the porosity size and its arrangement. The predicted results by the Eshelby-type model are compared with those by finite element analysis. Whenever the ratio of the porosity size to the specimen size becomes smaller than 0.07, the effective elastic constants predicted by finite element analysis are convergent regardless of the arrangement of the porosities. Under these conditions, the effective Young's moduli of the perforated plate can be predicted within the accuracy of $5\%$ by the Eshelby-type model, which overestimates and underestimates the effective Poisson's ratios by $10\%\;and\;6\%$ for the plates with periodically and non-periodically arranged porosities, respectively.

Analysis of the Behavior of Undrained Pore Water Pressure in Saturated Sand by Isotropic Loading Test (포화된 사질토에서 등방재하시험에 의한 비배수 공극수압의 거동분석)

  • Eam, Sung-Hoon
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.47 no.4
    • /
    • pp.43-52
    • /
    • 2005
  • It is known in some literatures that the B value is not equal to unity in saturated soil when effective stress is given, in which the B Value is the ratio of measured excess pore water pressure and isometric loading pressure. In this study the B value was measured on various effective stresses and on various incremental loading stresses in various grain size of specimens with saturated sand. The test results showed that the B value was affected largely by grain size of sand in specimen and the amount of effective stress. There was the semi-logarithmic relationship between B value and effective stress, and also there was the linear relationship between the gradient of the former semi-logarithmic relationship and grain size of specimen.

Calculation of Multiple Scattering in Water Cloud and Application in Remote Measurement of Cloud Physical Properties (구름에서의 다중산란효과 계산 및 이를 이용한 구름 물리변수 원격 추출 방법 연구)

  • Kim, Dukhyeon;Park, Sunho;Choi, Sungcheol
    • Korean Journal of Optics and Photonics
    • /
    • v.25 no.1
    • /
    • pp.1-7
    • /
    • 2014
  • Multiple scattering effects in cloud are important error sources of the Mie scattering Lidar inversion method, which should be measured to correct the Lidar equation in single wavelength Mie Lidar. We have calculated the multiple scattering effects in liquid water clouds by using a Monte Carlo method, and we have applied these multiple scattering effects in measuring water cloud effective size and LWC (Liquid Water Content). When cloud effective size is less than $2.5{\mu}m$, we can easily extract cloud effective size and LWC by using two wavelength Lidar such as extinction coefficients measured at 355nm and 1064nm. For a larger size cloud, we can find that saturated degree of linear polarization is strongly correlated with cloud effective size, LWC, and extinction coefficients. From these correlations we know that we can measure LWC and cloud effective size if we use single wavelength Rotational Raman Lidar and Mie scattering polarization Lidar.

Effects of Cu and B on Effective Grain Size and Low-Temperature Toughness of Thermo-Mechanically Processed High-Strength Bainitic Steels (TMCP로 제조된 고강도 베이나이트강의 유효결정립도와 저온인성에 미치는 Cu와 B의 영향)

  • Lee, Seung-Yong;Hwang, Byoungchul
    • Korean Journal of Materials Research
    • /
    • v.24 no.10
    • /
    • pp.520-525
    • /
    • 2014
  • Effects of Cu and B on effective grain size and low-temperature toughness of thermo-mechanically processed high-strength bainitic steels were investigated in this study. The microstructure of the steel specimens was analyzed using optical, scanning, and transmission electron microscopy; their effective grain size was also characterized by electron back-scattered diffraction. To evaluate the strength and low-temperature toughness, tensile and Charpy impact tests were carried out. The specimens were composed of various low-temperature transformation products such as granular bainite (GB), degenerated upper bainite (DUB), lower bainite (LB), and lath marteniste (LM), dependent on the addition of Cu and B. The addition of Cu slightly increased the yield and tensile strength, but substantially deteriorated the low-temperature toughness because of the higher volume fraction of DUB with a large effective grain size. The specimen containing both Cu and B had the highest strength, but showed worse low-temperature toughness of higher ductile-brittle transition temperature (DBTT) and lower absorbed energy because it mostly consisted of LB and LM. In the B-added specimen, on the other hand, it was possible to obtain the best combination of high strength and good low-temperature toughness by decreasing the overall effective grain size via the appropriate formation of different low-temperature transformation products containing GB, DUB, and LB/LM.

Linkage Disequilibrium and Effective Population Size in Hanwoo Korean Cattle

  • Lee, S.H.;Cho, Y.M.;Lim, D.;Kim, H.C.;Choi, B.H.;Park, H.S.;Kim, O.H.;Kim, S.;Kim, T.H.;Yoon, D.;Hong, S.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.12
    • /
    • pp.1660-1665
    • /
    • 2011
  • This study presents a linkage disequilibrium (LD) analysis and effective population size ($N_e$) for the entire Hanwoo Korean cattle genome, which is the first LD map and effective population size estimate ever calculated for this breed. A panel of 4,525 markers was used in the final LD analysis. The pairwise $r^2$ statistic of SNPs up to 50 Mb apart across the genome was estimated. A mean value of $r^2$ = 0.23 was observed in pairwise distances of <25 kb and dropped to 0.1 at 40 to 60 kb, which is similar to the average intermarker distance used in this study. The proportion of SNPs in useful LD ($r^2{\geq}0.25$) was 20% for the distance of 10 and 20 kb between SNPs. Analyses of past effective population size estimates based on direct estimates of recombination rates from SNP data demonstrated that a decline in effective population size to $N_e$ = 98.1 occurred up to three generations ago.

Estimation of effective population size using single-nucleotide polymorphism (SNP) data in Jeju horse

  • Do, Kyoung-Tag;Lee, Joon-Ho;Lee, Hak-Kyo;Kim, Jun;Park, Kyung-Do
    • Journal of Animal Science and Technology
    • /
    • v.56 no.8
    • /
    • pp.28.1-28.6
    • /
    • 2014
  • This study was conducted to estimate the effective population size using SNPs data of 240 Jeju horses that had raced at the Jeju racing park. Of the total 61,746 genotyped autosomal SNPs, 17,320 (28.1%) SNPs (missing genotype rate of >10%, minor allele frequency of <0.05 and Hardy-Weinberg equilibrium test P-value of < $10^{-6}$) were excluded after quality control processes. SNPs on the X and Y chromosomes and genotyped individuals with missing genotype rate over 10% were also excluded, and finally, 44,426 (71.9%) SNPs were selected and used for the analysis. The measures of the LD, square of correlation coefficient ($r^2$) between SNP pairs, were calculated for each allele and the effective population size was determined based on $r^2$ measures. The polymorphism information contents (PIC) and expected heterozygosity (HE) were 0.27 and 0.34, respectively. In LD, the most rapid decline was observed over the first 1 Mb. But $r^2$ decreased more slowly with increasing distance and was constant after 2 Mb of distance and the decline was almost linear with log-transformed distance. The average $r^2$ between adjacent SNP pairs ranged from 0.20 to 0.31 in each chromosome and whole average was 0.26, while the whole average $r^2$ between all SNP pairs was 0.02. We observed an initial pattern of decreasing $N_e$ and estimated values were closer to 41 at 1 ~ 5 generations ago. The effective population size (41 heads) estimated in this study seems to be large considering Jeju horse's population size (about 2,000 heads), but it should be interpreted with caution because of the technical limitations of the methods and sample size.

ANALYSIS OF EFFECTIVE NUGGET SIZE BY INFRARED THERMOGRAPHY IN SPOT WELDMENT

  • Song, J.H.;Noh, H.G.;Akira, S.M.;Yu, H.S.;Kang, H.Y.;Yang, S.M.
    • International Journal of Automotive Technology
    • /
    • v.5 no.1
    • /
    • pp.55-59
    • /
    • 2004
  • Spot welding is a very important and useful technology in fabrication of thin sheet structures such as the parts in an automobile. However, because the fatigue strength of the spot welding point is considerably lower than that of the base metal due to stress concentration at the nugget edge, the nugget size must be estimated to evaluate a reasonable fatigue strength at a spot welded lap joint. So far, many investigators have experimentally studied the estimation of fatigue strengths of various spot weldments by using a destructive method. However, these destructive methods poses problems so testing of weldments by these methods are difficult. Furthermore, these methods cannot be applied to a real product, and are time and cost consuming, as well. Therefore, there has been a strong, continual demand for the development of a nondestructive method for estimating nugget size. In this study, the effective nugget size in spot weldments have been analyzed by using thermoelastic stress analysis adopting infrared thermography. Using the results of the temperature distribution obtained by analysis of the infared stress due to adiabatic heat expansion under sinusoidal wave stresses, the effective nugget size in spot welded specimens were estimated. To examine the evaluated effective nugget size in spot weldments, it was compared with the results of microstructure observation from a 5% Nital etching test.