• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3709-3714
• /
• 2013

Based on the Debye-H$\ddot{u}$ckel equation, a semi-empirical equation for activity coefficients was derived through empirical and theoretical trial and error efforts. The obtained equation included two parameters: the proportional factor and the effective radius of an ionic sphere. These parameters were used in the empirical and regression parameter fitting of the calculated values to the experimental results. The activity coefficients calculated from the equation agreed with the data. Transforming to a semi-empirical form, the equation was expressed with one parameter, the ion radius. The ion radius, ${\alpha}$, was divided into three parameters, ${\alpha}_{cation}$, ${\alpha}_{anion}$ and ${\delta}_{cation}$, representing parameters for the cation, anion and combination, respectively. The advantage of this equation is the ability to propose a semi-empirical equation that can easily determine the activity coefficient with just one parameter, so the equation is expected to be used more widely in actual industry applications.

• 한국생산제조학회지
• /
• 제5권3호
• /
• pp.58-65
• /
• 1996

This thesis is concerned with the study on the characteristics of the cutting resistance occurring in finish machining of hardened steels such as carbon tool steel and alloy tool steel by a ceramic tool with nose radius. For the purpose, the shape of cutting cross-section made at nose part of the tool was analyzed geometrically and the wear mechanism on the flank face of the ceramic tool is investigated. In order to investigate the characteristics of cutting resistance two categories of cutting conditions are suggested, along with geometrical analysis. One category includes the conventional cutting parameters such as feed and depth of cut, another containing new cutting parameters of thickness of cut and width of cut etc. Thickness of cut width of cut and area of undeformed chip section formed by the condition of engagement between workpiece and cutting tool are determined as the function of feed, depth of cut and nose radius of cutting too, And an effective approach angle is determined by depth of cut and nose radius.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.69-77
• /
• 2004

The Gaussian heat source has been widely used to simulate the heat flux of the welding we, and applied to calculating the temperature distribution of a workpiece. The conventional two-dimensional Gaussian heat source for the GMAW is modified in this work by decomposing the arc heat into heats of the cathode and metal transfer. The efficiency and effective arc radius of each heat source are determined analytically for the free-flight mode such as the globular and spray modes. The temperature distribution and weld geometry are calculated using the finite element method, and distribution of the drop heat is found to have significant effects on the penetration. The predicted results show good agreements with the available experimental results, especially with the penetration.

• 한국정밀공학회지
• /
• 제1권3호
• /
• pp.71-84
• /
• 1984

This paper examined strain distribution and radius of curvature of the bulge by finite element method and investigated limit polar thickness strain to predict the formability of sheet metal as we substituted effective strain and the radius of curvature obtained by FEM into instability condition equation successively. In experiment, the radius of curvature and limit polar thickness strainwere obtained by Moire method. Also, a concent- ric set of photogrid circles was used to measure the strain of arbitrary point and mild steel was used as material. This results obtained are as follows: 1) The radius of curvature obtained by FEM is in good agreement with the Moire experimental value. 2) The polar thickness strain is getting larger as the inside is approached from the edge. This means that fracture occurred near the ploe. 3) The circumferential strains agree closely with the meridian strains and the polar thickness strain is about twice the circumferential (or meridian) strain. This result agrees with the fact that anisotropy coefficient (R-value) obtained by tensile test is about one. 4) The theoretical results of limit polar thickness strain obtained by authors' method are better agreement with experimental results than other theoretical results. Therefore, we can better predict the formability of sheet metal with authors' method.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.19-23
• /
• 2019

In the mold industry, CAM software has been introduced to solve the impossible or time-consuming part of the mold industry because the increase in labor costs, the drop in mold price, and the short delivery time are tasks to be solved not only in the manufacturing industry but also in the mold industry as a whole. In order to reduce the processing time and improve the surface roughness, we have been conducting various researches for efficient machining. This study was carried out to compare the ball end mill and radius end mill tools with the Power mill software and NC brain software under the same conditions and to find out the most efficient method of machining the smooth drafting surface and improving the surface roughness. (1) By machining the smooth drafting surface using radius end mill, the machining time is 23.7% faster than when using ball end mill. (2) Surface roughness when machined with radius end mill is smoother than when using ball end mill. Based on these results, it can not be applied to all shapes, but if it is a relatively wide and simple gradient shape, the raster machining method using radius end mill can be more effective in terms of delivery and quality than machining with ball end mill.

• 대한전자공학회논문지TC
• /
• 제49권2호
• /
• pp.56-66
• /
• 2012

단위 셀의 길이를 고정시키고 단위 셀의 폭과 via를 변화시켜 수평방향 방사가 억제되고 전방방향 방사가 증가하여 방사특성이 향상되는 inductive loaded 패치 안테나에 대하여 연구하였다. Inductive loaded 전송선을 구성하는 단위 셀의 구조 파라미터인 via 반경과 단위 셀 패치의 면적에 따라 분산 특성을 살펴보았다. 수평방향의 방사를 억제시키기 위해 inductive loaded 패치 안테나의 유효유전상수를 1과 가깝게 만드는 via의 반경과 단위 셀 패치의 폭을 결정하는 방법을 체계적으로 설명하였다. 5 GHz에서 동작하는 $5{\times}1$ inductive loaded 패치 안테나를 설계하여 방사특성을 전산모의한 결과 유효유전상수가 1보다 다소작을 때 E-평면 방향 수평 방사가 약 -15 dBi 이하로 크게 억제됨을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1-6
• /
• 2004

In this study, the intrinsic static/dynamic fracture toughness of Al 7175=T74 is evaluated from the apparent static/ dynamic toughness of notched specimen, The critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. Also, effective distance is applied to estimate the failure criterion for the combustion pipe with notch. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, the effective In this study, the intrinsic static/dynamic fracture toughness of Al 7175=T74 is evaluated from the apparent static/ dynamic toughness of notched specimen, The critical average stress fracture model is suggested to establish the relationship to predict the intrinsic fracture toughness from the apparent fracture toughness of a notched specimen. The critical average stress fracture model is established using the relation between the notch root radius and the effective distance calculated by finite element analysis. Also, effective distance is applied to estimate the failure criterion for the combustion pipe with notch. It is conclude that the true fracture toughness can be estimated from test results of apparent fracture toughness measured by using a notched specimen. Also, the effective distance can be used to evaluate the failure criterion of structure with notch.

• 대한원격탐사학회지
• /
• 제24권4호
• /
• pp.289-298
• /
• 2008

본 연구에서는 에어로솔의 간접 효과를 고려한 구름의 광학두께와 유효입자반경을 산출하기 위해 새로운 알고리즘을 개발하였다. 구름의 미세물리적 특성을 산출하기 위해 Nakajima and Nakajima(1995)의 방법을 응용하였다. 다양한 대기상태에서 복사전달모델을 이용하여 미리 계산한 서로 다른 LUT을 적용하여 최종 산출물인 구름광학두께와 유효입자반경을 산출하였다. 러시아지역에 산불이 있었던 2003년 5월 한반도 주변을 사례로 선택하였다. 이 때 발생한 에어로솔은 대기 흐름을 따라 한반도까지 도달하여 한반도 주변의 날씨에 매우 많은 영향을 주었다. 본 연구에서는 이 시기에 러시아 지역의 산불로 인하여 발생한 에어로솔이 한반도 주변의 구름에 어떠한 영향을 주는지 알아보았다. 이 사례의 알고리즘 적용을 위해 Terra위성에 탑재된 분광계인 MODIS자료를 사용하였다. 사례분석 결과, 에어로솔이 있는 시기에는 유효입자반경이 $20{\mu}m$ 이상의 큰 구름은 거의 존재하지 않았음에 비해, 에어로솔이 거의 없는 시기에는 $20{\mu}m$ 이상의 큰 구름도 다수 존재하였다. 즉, 에어로솔의 영향하에 발달한 구름은 구름광학두께는 크고, 유효입자반경은 작은 구름이라는 것을 확인할 수 있었다. 이러한 결과는 에어로솔이 구름의 미세물리적 특성을 변화시킨다는 것을 보여준다.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.924-928
• /
• 2018

The objective of this study is to solve a problem that is occurred during the spline machining of tubular shaft yoke in both side IMS module. In order to simulate the problem, the movement direction of upper die was set as standard case and error case. The material of tubular shaft yoke was set to S20C as refer to the analysis library. The movement directions of upper die were separated with standard case and error case. The error case was set to simulate the problem in the spline machining of tubular shaft yoke. In order to solve the problem, the outer radius of upper die were modelled from 9.40mm to 9.44mm. The simulation results were analyzed and compared in terms of effective stress, metal flow line and folding phenomena characteristics. In case of the outer radius of upper die was 9.42mm, it was observed a relatively uniform effective stress distribution and had a straight metal flow line.

• 한국지반공학회논문집
• /
• 제31권11호
• /
• pp.49-60
• /
• 2015

개방수역 퇴적물 처리는 해안공사에서 다양한 목적으로 수행되고 있다. 매립토의 거동은 수중 침강단계와 하상 퇴적단계로 구분하여 해석을 수행하였으며, 이를 이용하여 매립토의 수중 투기에 의한 유보율을 평가하였다. 매립토 입자의 침강단계는 thermal 단계와 swarm 단계로 구분하여 입자구름의 침강속도와 환산 반경에 대한 일반화된 방정식을 제시하였다. 하상 퇴적단계는 개발된 프로그램을 이용하여 매립토의 마찰각과 유속의 변화에 따른 퇴적형상의 성장계수를 평가하였다. 유보율은 매립토의 해수면 위의 투기지점을 원의 중심으로 하고 원의 유효 반경내에 잔류하는 매립토의 질량비로 정의하였다. 싱가포르 현장을 기준으로 수심을 20m, 유속은 0.0-1.5m/s 구간에서 유효반경 5m에 대한 유보율도를 제시하였다. 이는 해안 매립공사에서 매립토의 유실율을 저감하여 시공성을 개선하고 주변환경오염을 최소화하는 자료로 활용될 수 있다.