• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.488-493
• /
• 1989

In this paper, the structure of CMAC address mapping is first revisited, and the address hashing function and the random mapping is discussed in the conventional CMAC implementation. Then the effective size of CMAC memory is derived from the modulus property of the CMAC address vector, and a new hashing function for the effective memory mapping is proposed for a CMAC implementation with feasible memory size and no troublesome random mapping. Finally, the performance of the conventional CMAC learning algorithm and that of the proposed new CMAC scheme arc compared via simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.401-403
• /
• 2014

In this paper, we address data detection technique using Fixed complexity LLL-based signal detection over multi-antenna SC-FDMA wireless channels. We use the property of effective channel matrix of SC-FDMA system. We can make the large effective channel matrix to various small effective channel matrix. We show that error performance of proposed detection technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1249-1255
• /
• 2009

Cord-rubber composites widely used in tires show very complicated mechanical behavior such as nonlinearity and large deformation. Three-phase(cord, rubber and the interface) modeling has been used to analyze the stress distribution in the cord-rubber composites more accurately. In this study, finite element methods were performed using two-dimensional generalized plane strain element and plane strain element to investigate the stress distribution and effective modulus of cord-rubber composites. Neo Hookean model was used for rubber property and several interface properties were assumed for various loading directions. It was found that the interface properties affect the effective modulus and the distributions of shear stress.

• Elastomers and Composites
• /
• v.33 no.1
• /
• pp.17-26
• /
• 1998

Natural rubber was filled with 8 commercial carbon blacks covering range of rubber-grade products at different levels of filler loadings in order to investigate physical compound and vulcanizate properties. It was found that the curves of rubber property vs filler loading of both uncured compounds and vulcanizates can be superposed to one single master curve by introducing an effective volume fraction which is based on CDBP. The effective volume fraction, $V_{EFF}$ was utilized to explain the variation of the stiffness of all rubber compounds. The surface area-corrected effective volume fraction, V', was utilized to explain the formation of bound rubber, rebound and lambourn wear.

• Agribusiness and Information Management
• /
• v.4 no.2
• /
• pp.32-41
• /
• 2012

Studies have shown that the future of the wine market rests on the effective and efficient changes in technology to the supply chain used by most of the major global players. In today's wine industry, companies are faced with the ever-shifting demand for their products, strict regulation and increasing price competition. Even at that, mature companies in the wine industry are succeeding by scaling up production, streamlining their supply chains, expanding into new geographic areas, implementing more efficient processes, cleverly marketing products, and focusing on ever closer relationships with suppliers, partners and customers. However, this paper looks at supply chain challenges in the wine industry from a global perspective presented in the inbound, manufacturing and outbound processes as well as offer effective solutions in order for companies to gain a competitive advantage and succeed on a global level.

• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.119-123
• /
• 2005

We proposed a method of effective watermarking based m HVS. To speak generally, HVS parameters are contrast sensitivity, texture degree, entropy sensitivity and standard of deviation, etc. The aim of this paper is evaluated by the experiments of imperceptibility and correctness of watermark. According to some experimental results, contrast sensitivity function is superior in smooth image. On the other hand, standard of deviation provides good results in rough images. Consequently, how to select the parameters considering image attribute is key problem in effective watermarking.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1261-1268
• /
• 2001

Effective material properties of active fiber composites with interdigitated electrodes are derived as a function of the fiber volume fraction. For the purpose of applying the rule of mixture, three unit cell models are introduced; each for the deformation and stress continuities in the out of plane and in-plane directions, and the continuity of the electrical displacement in the longitudinal direction. Derived effective material properties are compared with the results by the finite element method; good agreements are observed between them. As an application, the electromechanical behavior of the angle ply laminates with the active fiber layers bonded on the top and bottom surfaces are investigated; the angle of piezoelectric fiber to maximize the twisting curvature is obtained using the present model.

• Korean Journal of Materials Research
• /
• v.12 no.10
• /
• pp.776-783
• /
• 2002

Austenitic stainless steel (STS304) has been carburized using glow discharge plasma and its microstructure, wear resistance and corrosion property have been investigated. A repeat boost-diffuse carburizing was used as an effective plasma carburizing method. The effective case depth of the plasma carburized specimens was increased with the carbon concentration at the surface area. The specimens prepared by 3 hours plasma carburizing under $600^{\circ}C$ did not have the standard hardness for the effective case depth, but the specimen prepared by 11 hours plasma carburizing at $500^{\circ}C$ had nearly the same hardness with the specimen plasma carburized for 3 hours at $800^{\circ}C$. The wear resistance increased with temperature but the corrosion properties of the specimens prepared over $600^{\circ}C$ decreased rapidly due to the grain boundary sensitization. However, the specimen plasma carburized for 11 hours at $500^{\circ}C$ had nearly the same wear resistance with the specimen plasma carburized for 3 hours at $800^{\circ}C$ without deterioration of corrosion property. This could be resulted from the fact that the microstructure of the specimen plasma carburized for 11 hours at $500^{\circ}C$ was composed of martensite and austenite, because a partial martensite transformation was occurred only in the specimen plasma carburized for 11 hours at 50$0^{\circ}C$.

• International Journal of Highway Engineering
• /
• v.3 no.1 s.7
• /
• pp.185-197
• /
• 2001

This paper dealt with modification of effective crack length model (ECM) by adding Poisson's ratio term to evaluate fracture toughness of asphalt concrete which varies its material property by temperature. The original ECM model was developed for solid materials, such as cement concrete, and Poisson's ratio of materials was not considered. However, since asphalt concrete is sensitive to temperature variation and changes its Poisson's ratio by temperature, it should be taken into consideration to know exact fracture property under various temperatures. Four binders, including 3 polymer-modified asphalt (PMA) binders, were used to make a dense-grade asphalt mixture and 3-point bending test was peformed on notched beam at low temperatures, from -5oC to 35oC. Elastic modulus, flexural strength and fracture toughness were obtained from the test. The results showed that, since Poisson's ratio was considered, the more accurate test values could be obtained using modified ECM equation than original ECM. PMA mixture showed higher stiffness and fracture toughness than normal asphalt mixture under very low temperatures.

• Elastomers and Composites
• /
• v.29 no.3
• /
• pp.226-233
• /
• 1994

The properties of the mixed prepolymer-urethane in the range of 10-40 phr were observed. LBR and LCR have same functional group but different in structure of molecular. The viscosity of mixture depending on content of rubber, adhesive strength, thermal property and compatibility with a diluted solvent are as follows: 1. The viscosity of the mixture was influenced by solubility of the diluent for urethane resin and liquid rubber. 2. Adhesive strength showed the highest value at 30phr rubber, decreased gradually at above 30phr rubber. And LBR revealed better physical property than that of LCR. 3. The most effective factors affecting adhesive strength are molecular structure of rubber, the type of solvent, and volatility. 4. Urethane resin containing LBR showed better compatibility for solvent and faster drying velocity. 5. LBR showed more favorable compatibility and dispersion state than those of LCR by analyzing the results of SEM.