• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.392-400
• /
• 2009

In this paper, we propose an effective speech reinforcement technique base on ITU-T G.729A CS-ACELP codec under the near-end background noise environments. In general, since the intelligibility of the far-end speech for the near-end listener is significantly reduced under near-end noise environments, we require a far-end speech reinforcement approach to avoid this phenomena. In contrast to the conventional speech reinforcement algorithm, we reinforce the excitation signal of the codec's parameters received from the far-end speech signal based on the G.729A speech codec under various background noise environments. Specifically, we first estimate the excitation signal of ambient noise at the near-end through the encoder of the G.729A speech codec, reinforcing the excitation signal of the far-end speech transmitted from the far-end. we specially propose a novel approach to directly reinforce the excitation signal of far-end speech signal based on the decoder of the G.729A. The performance of the proposed algorithm is evaluated by the CCR (Comparison Category Rating) test of the method for subjective determination of transmission quality in ITU-T P.800 under various noise environments and shows better performances compared with conventional SNR Recovery methods.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.21-29
• /
• 2024

In the rapidly advancing information society, electronic devices, including smartphones and tablets, are increasingly digitized and equipped with high-performance features such as flexible displays. This study focused on optimizing the manufacturing process for Transparent Conductive Films (TCF) by using the cost-effective conductive polymer PEDOT and transparent substrate PET as alternatives to expensive materials in flexible display technology. The variables considered are production speed (m/min), coating maximum temperature (℃), and PEDOT supply speed (rpm), with surface resistivity (Ω/□) as the response parameter, using Response Surface Methodology (RSM). Optimization results indicate the ideal conditions for production: a speed of 22.16 m/min, coating temperature of 125.28℃, and PEDOT supply at 522.79 rpm. Statistical analysis validates the reliability of the results (F value: 18.37, P-value: < 0.0001, R²: 0.9430). Under optimal conditions, the predicted surface resistivity is 145.75 Ω/□, closely aligned with the experimental value of 142.97 Ω/□. Applying these findings to mass production processes is expected to enhance production yields and decrease defect rates compared to current practices. This research provides valuable insights for the advancement of flexible display manufacturing.

• Archives of Metallurgy and Materials
• /
• v.65 no.4
• /
• pp.1317-1322
• /
• 2020

The present study investigated various thermodynamic parameters, microstructures and electrochemical behaviors of TiMoVCrZr and Ti-rich TiMoVCrZr high-entropy alloys (HEAs) prepared by vacuum arc remelting. The microstructures of the alloys were analyzed using X-ray diffraction (XRD) analysis, field emission scanning electron microscopy (FE-SEM), and potentiodynamic polarization tests. The determined thermodynamic values of the Ω-parameter and the atomic size difference (δ) for the HEAs were determined to be in the range of Ω ≥ 1.1, and δ ≤ 6.6% with valance electron configuration (VEC) ≤ 5.0, suggesting the HEAs were effective at forming solid solutions. XRD patterns of the equiatomic Ti₂₀Mo₂₀V₂₀Cr₂₀Zr₂₀ HEA revealed four phases consisting of the body centered cubic1 (BCC₁), BCC₂, hexagonal close-packed (HCP), and intermetallic compound Cr₂Zr phases. Three phases were observed in the XRD patterns of Ti-rich Ti₄₀Mo₁₅V₁₅Cr₁₅Zr₁₅ (BCC, HCP, and Cr₂Zr) and a single BCC phase was observed in Ti-rich Ti₆₀Mo₁₀V₁₀Cr₁₀Zr₁₀ HEAs. The backscattered-electron (BSE) images on the equiatomic Ti₂₀Mo₂₀V₂₀Cr₂₀Zr₂₀ HEA revealed BCC and HCP phases with Cr₂Zr precipitates, suggesting precipitation from the HCP solid solution during the cooling. The micro-segregation of Ti-rich Ti₆₀Mo₁₀V₁₀C₁₀Zr₁₀ HEAs appeared to decrease remarkably. The alloying elements in the HEAs were locally present and no phase changes occurred even after additional HIP treatment. The lowest current density obtained in the polarization potential test of Ti-rich Ti₄₀Mo₁₅V₁₅Cr₁₅Zr₁₅ HEA was 7.12×10^-4 mA/cm² was obtained. The studied TiMoVCrZr HEAs showed improved corrosion characteristics as compared to currently available joint replacement material such as ASTM F75 alloy.

• Communications of Mathematical Education
• /
• v.38 no.3
• /
• pp.379-400
• /
• 2024

This study aims to propose a method for analyzing mathematics assessment data that integrates both content and cognitive domains, utilizing the multidimensional two-parameter logistic model with a Q-matrix (M2PL-Q; da Silva, 2019). The method was applied to the TIMSS 2019 8th-grade mathematics assessment data. The results demonstrate that the M2PL-Q model effectively estimates students' ability levels across both domains, highlighting the interrelationships between abilities in each domain. Additionally, the M2PL-Q model was found to be effective in estimating item characteristics by differentiating between content and cognitive domain, revealing that their influence on problem-solving can vary across items. This study is significant in that it offers a comprehensive analytical approach that incorporates both content and cognitive domains, which were traditionally analyzed separately. By using the estimated ability levels for individual student diagnostics, students' strengths and weaknesses in specific content and cognitive areas can be identified, supporting more targeted learning interventions. Furthermore, by considering the detailed characteristics of each assessment item and applying them appropriately based on the context and purpose of the assessment, the validity and efficiency of assessments can be enhanced, leading to more accurate diagnoses of students' ability levels.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4007-4017
• /
• 2024

In the city centre of Isparta, located in the southwestern part of Türkiye, indoor radon concentrations and gamma dose rate levels were observed above the world and country averages. For this reason, the determination of the natural radioactivity levels in soil samples of Isparta province is of great interest. In the present study, the activity concentrations of radionuclides (namely ²²⁶Ra,²³²Th, ⁴⁰K and ¹³⁷Cs) were investigated in the soil samples collected from 72 different points including the city centre and 12 towns of Isparta by using a gamma spectrometer with a high-purity germanium (HPGe) detector. The activity concentrations of ²²⁶Ra,²³²Th, ⁴⁰K and ¹³⁷Cs radionuclides in the samples were found in the range of 4.08 ± 0.39-69.84 ± 1.43 Bqkg^-1, 2.63 ± 0.28-65.66 ± 1.41 Bqkg^-1, 44.48 ± 3.17-452.38 ± 9.65 Bqkg^-1 and 0.28 ± 0.18-19.10 ± 0.61 Bqkg^-1 respectively. The averages of all the measurements were determined as 15.69 ± 0.72 Bqkg^-1 for 226Ra, 15.40 ± 0.78 Bqkg^-1 for ²³²Th, 210.60 ± 6.22 Bqkg^-1 for ⁴⁰K and 3.44 ± 0.31 Bqkg^-1 for ¹³⁷Cs. Although these values were below the country and world averages, it was revealed that the ²²⁶Ra and ²³²Th activity concentrations in the city centre exceeded the national and world averages. In addition, radiological risk maps of the analysed radionuclides were produced for the first time, covering all towns within the Isparta province. To evaluate the radiological hazards resulting from natural radionuclides, external hazard index (Hex), absorbed dose rate (D), annual effective dose equivalent (AEDE), male and female lifetime cancer risk (LCR) values were also calculated. The outcomes of this study revealed that all the radiological parameter averages for Isparta were lower than the world and country averages but the calculation results for the city centre displayed the opposite of this situation except for the external hazard index.

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.2
• /
• pp.95-104
• /
• 2009

Background: The pathophysiologic mechanisms of early acute lung injury (ALI) differ according to the type of primary insult. It is important to differentiate between direct and indirect pathophysiologic pathways, and this may influence the approach to treatment strategies. NF-$\kappa$B decoy oligodeoxynucleotide (ODN) is a useful tool for the blockade of the expression of NF-$\kappa$B-dependent proinflammatory mediators and has been reported to be effective in indirect ALI. The purpose of this study was to investigate the effect of NF-$\kappa$B decoy ODN in the lipopolysaccharide (LPS)-induced direct ALI model. Methods: Five-week-old specific pathogen-free male BALB/c mice were used for the experiment. In the preliminary studies, tumor necrosis factor (TNF)-$\alpha$, interleukine (IL)-6 and NF-$\kappa$B activity peaked at 6 hours after LPS administration. Myeloperoxidase (MPO) activity and ALI score were highest at 36 and 48 hours, respectively. Therefore, it was decided to measure each parameter at the time of its highest level. The study mice were randomly divided into three experimental groups: (1) control group which was administered 50 ${\mu}L$ of saline and treated with intratracheal administration of 200 ${\mu}L$ DW containing only hemagglutinating virus of Japan (HVJ) vector (n=24); (2) LPS group in which LPS-induced ALI mice were treated with intratracheal administration of 200 ${\mu}L$ DW containing only HVJ vector (n=24); (3) LPS+ODN group in which LPS-induced ALI mice were treated with intratracheal administration of 200 ${\mu}L$ DW containing 160 ${\mu}g$ of NF-$\kappa$B decoy ODN and HVJ vector (n=24). Each group was subdivided into four experimental subgroups: (1) tissue subgroup for histopathological examination for ALI at 48 hours (n=6); (2) 6-hour bronchoalveolar lavage (BAL) subgroup for measurement of TNF-$\alpha$ and IL-6 in BAL fluid (BALF) (n=6); (3) 36-hour BAL subgroup for MPO activity assays in BALF (n=6); and (4) tissue homogenate subgroup for measurement of NF-$\kappa$B activity in lung tissue homogenates at 6 hours (n=6). Results: NF-$\kappa$B decoy ODN treatment significantly decreased NF-$\kappa$B activity in lung tissues. However, it failed to improve the parameters of LPS-induced direct ALI, including the concentrations of tumor necrosis factor-$\alpha$ and interleukin-6 in BALF, myeloperoxidase activity in BALF and histopathologic changes measured by the ALI score. Conclusion: NF-$\kappa$B decoy ODN, which has been proven to be effective in indirect models, had no effect in the direct ALI model.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.119-120
• /
• 2004

Urban groundwater has a unique hydrologic system because of the complex surface and subsurface infrastructures such as deep foundation of many high buildings, subway systems, and sewers and public water supply systems. It generally has been considered that increased surface impermeability reduces the amount of groundwater recharge. On the other hand, leaks from sewers and public water supply systems may generate the large amounts of recharges. All of these urban facilities also may change the groundwater quality by the recharge of a myriad of contaminants. This study was performed to determine the factors controlling the recharge of deep groundwater in an urban area, based on the hydrogeochemical characteristics. The term ‘contamination’ in this study means any kind of inflow of shallow groundwater regardless of clean or contaminated. For this study, urban groundwater samples were collected from a total of 310 preexisting wells with the depth over 100 m. Random sampling method was used to select the wells for this study. Major cations together with Si, Al, Fe, Pb, Hg and Mn were analyzed by ICP-AES, and Cl, N $O_3$, N $H_4$, F, Br, S $O_4$and P $O_4$ were analyzed by IC. There are two groups of groundwater, based on hydrochemical characteristics. The first group is distributed broadly from Ca-HC $O_3$ type to Ca-C1+N $O_3$ type; the other group is the Na+K-HC $O_3$ type. The latter group is considered to represent the baseline quality of deep groundwater in the study area. Using the major ions data for the Na+K-HC $O_3$ type water, we evaluated the extent of groundwater contamination, assuming that if subtract the baseline composition from acquired data for a specific water, the remaining concentrations may indicate the degree of contamination. The remainder of each solute for each sample was simply averaged. The results showed that both Ca and HC $O_3$ represent the typical solutes which are quite enriched in urban groundwater. In particular, the P$CO_2$ values calculated using PHREEQC (version 2.8) showed a correlation with the concentrations of maior inorganic components (Na, Mg, Ca, N $O_3$, S $O_4$, etc.). The p$CO_2$ values for the first group waters widely ranged between about 10$^{-3.0}$ atm to 10$^{-1.0}$ atm and differed from those of the background water samples belonging to the Na+K-HC $O_3$ type (<10$^{-3.5}$ atm). Considering that the p$CO_2$ of soil water (near 10$^{-1.5}$ atm), this indicates that inflow of shallow water is very significant in deep groundwaters in the study area. Furthermore, the P$CO_2$ values can be used as an effective parameter to estimate the relative recharge of shallow water and thus the contamination susceptibility. The results of our present study suggest that down to considerable depth, urban groundwater in crystalline aquifer may be considerably affected by the recharge of shallow water (and pollutants) from an adjacent area. We also suggest that for such evaluation, careful examination of systematically collected hydrochemical data is requisite as an effective tool, in addition to hydrologic and hydrogeologic interpretation.ion.ion.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.347-357
• /
• 2003

This paper describes on the suppression of sea clutter on marine radar display using a cell-averaging CFAR(constant false alarm rate) technique, and on the analysis of radar echo signal data in relation to the estimation of ARPA functions and the detection of the shadow effect in clutter returns. The echo signal was measured using a X -band radar, that is located on the Pukyong National University, with a horizontal beamwidth of $$3.9^{\circ}$$, a vertical beamwidth of $20^{\circ}$, pulsewidth of $0.8 {\mu}s$ and a transmitted peak power of 4 ㎾ The suppression performance of sea clutter was investigated for the probability of false alarm between $l0-^0.25;and; 10^-1.0$. Also the performance of cell averaging CFAR was compared with that of ideal fixed threshold. The motion vectors and trajectory of ships was extracted and the shadow effect in clutter returns was analyzed. The results obtained are summarized as follows；1. The ARPA plotting results and motion vectors for acquired targets extracted by analyzing the echo signal data were displayed on the PC based radar system and the continuous trajectory of ships was tracked in real time. 2. To suppress the sea clutter under noisy environment, a cell averaging CFAR processor having total CFAR window of 47 samples(20+20 reference cells, 3+3 guard cells and the cell under test) was designed. On a particular data set acquired at Suyong Man, Busan, Korea, when the probability of false alarm applied to the designed cell averaging CFAR processor was 10$^{-0}$.75/ the suppression performance of radar clutter was significantly improved. The results obtained suggest that the designed cell averaging CFAR processor was very effective in uniform clutter environments. 3. It is concluded that the cell averaging CF AR may be able to give a considerable improvement in suppression performance of uniform sea clutter compared to the ideal fixed threshold. 4. The effective height of target, that was estimated by analyzing the shadow effect in clutter returns for a number of range bins behind the target as seen from the radar antenna, was approximately 1.2 m and the information for this height can be used to extract the shape parameter of tracked target..

• Journal of Intelligence and Information Systems
• /
• v.25 no.3
• /
• pp.117-140
• /
• 2019

As the aging phenomenon accelerates and various social problems related to the elderly of the vulnerable are raised, the need for effective elderly care solutions to protect the health and safety of the elderly generation is growing. Recently, more and more people are using Smart Toys equipped with ICT technology for care for elderly. In particular, log data collected through smart toys is highly valuable to be used as a quantitative and objective indicator in areas such as policy-making and service planning. However, research related to smart toys is limited, such as the development of smart toys and the validation of smart toy effectiveness. In other words, there is a dearth of research to derive insights based on log data collected through smart toys and to use them for decision making. This study will analyze log data collected from smart toy and derive effective insights to improve the quality of life for elderly users. Specifically, the user profiling-based analysis and elicitation of a change in quality of life mechanism based on behavior were performed. First, in the user profiling analysis, two important dimensions of classifying the type of elderly group from five factors of elderly user's living management were derived: 'Routine Activities' and 'Work-out Activities'. Based on the dimensions derived, a hierarchical cluster analysis and K-Means clustering were performed to classify the entire elderly user into three groups. Through a profiling analysis, the demographic characteristics of each group of elderlies and the behavior of using smart toy were identified. Second, stepwise regression was performed in eliciting the mechanism of change in quality of life. The effects of interaction, content usage, and indoor activity have been identified on the improvement of depression and lifestyle for the elderly. In addition, it identified the role of user performance evaluation and satisfaction with smart toy as a parameter that mediated the relationship between usage behavior and quality of life change. Specific mechanisms are as follows. First, the interaction between smart toy and elderly was found to have an effect of improving the depression by mediating attitudes to smart toy. The 'Satisfaction toward Smart Toy,' a variable that affects the improvement of the elderly's depression, changes how users evaluate smart toy performance. At this time, it has been identified that it is the interaction with smart toy that has a positive effect on smart toy These results can be interpreted as an elderly with a desire to meet emotional stability interact actively with smart toy, and a positive assessment of smart toy, greatly appreciating the effectiveness of smart toy. Second, the content usage has been confirmed to have a direct effect on improving lifestyle without going through other variables. Elderly who use a lot of the content provided by smart toy have improved their lifestyle. However, this effect has occurred regardless of the attitude the user has toward smart toy. Third, log data show that a high degree of indoor activity improves both the lifestyle and depression of the elderly. The more indoor activity, the better the lifestyle of the elderly, and these effects occur regardless of the user's attitude toward smart toy. In addition, elderly with a high degree of indoor activity are satisfied with smart toys, which cause improvement in the elderly's depression. However, it can be interpreted that elderly who prefer outdoor activities than indoor activities, or those who are less active due to health problems, are hard to satisfied with smart toys, and are not able to get the effects of improving depression. In summary, based on the activities of the elderly, three groups of elderly were identified and the important characteristics of each type were identified. In addition, this study sought to identify the mechanism by which the behavior of the elderly on smart toy affects the lives of the actual elderly, and to derive user needs and insights.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.359-364
• /
• 2008

The development of Aulacorthum solani (Kaltenbach) was studied at temperatures ranging from 12.5 to $27.5^{\circ}C$ under $65{\pm}5%$ RH, and a photoperiod of 16:8 (L:D). Mortality of $1st{\sim}2nd$ nymph was higher than that of $3rd{\sim}4th$ nymph at the most temperature ranges whereas at high temperature of $27.5^{\circ}C$, more $3{\sim}4th$ nymph stage individuals died. The total developmental time ranged from 16.9 days at $12.5^{\circ}C$ to 6.6days at $22.5^{\circ}C$, suggesting that higher the temperature, faster the development. However, at higher temperature of $25^{\circ}C$ the development took 7.4 days. The lower developmental threshold temperature and effective accumulative temperatures for the total immature stage were $0.08^{\circ}C$ and 162.8 day-degreeslated development. The nonlinear shape of temperature rewas well described by the modified Sharpe and DeMichele model. When the normalized cumulative frequency distributions of developmental times for each life stage were fitted to the three-parameter Weibull function, attendance of shortened developmental times was apparent with in $1{\sim}2nd$ nymph, $3{\sim}4th$ nymph, and total nymph stages in descending order. The coefficient of determination $r^2$ ranged between 0.86 and 0.91.