• Korean Journal of Poultry Science
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2008

The study was conducted to evaluate the effects of dietary organic acid mixture(lactic acid 12%, formic acid 9%, citric acid 5%, butyric acid 5% and phosphoric acid 6%) on growth performance, organ weight, blood immunological parameter and intestinal villi morphology in broilers. Dietary treatments included 1) CON (basal diet), 2) OA1 (basal diet + 0.1% organic acid mixture) and 3) OA2 (basal diet + 0.2% organic acid mixture). Four hundred eighty hatched Arbor Acre broiler chickens were housed in 24 pens of 20 birds each. Eight replicate pens were allotted into each treatment by completely randomized design. Daily weight gain, feed intake and feed/gain were not significantly different among the treatments. In organ weight, that of gizzard was significantly heavier in OA2 than CON (Linear effect = 0.034). However, those of spleen and intestine were not significantly different among the treatments. Blood immunological parameters such as RBC, WBC and lymphocyte were not significantly difference. In intestinal villi morphology, villi length was increased in OA1 compared to CON (Quadratic effect = 0.050). In conclusion, 0.2% organic acid mixture was effective to improve gizzard weight of broilers.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.620-625
• /
• 1993

This experiment was carried out to predict the sensory properties of yogurt by instrumental methodology. Sensory attributes such as viscosity, mouth-feel, taste and quality were investigated. Instrumental parameters were measured with refractometer, viscometer, consistometer and rheometer. Sensory data showed that viscosity of peach yogurt was higher than that of strawberry and tropical-fruit-mixed (TFM) yogurts (p<.05). All instrumental parameters of peach yogurt were higher than those of strawberry and TFM yogurts, except cohesiveness and elasticity (p<.05). Viscosity measured by panelists was significantly correlated with instrumental viscosity, consistency, hardness, adhesiveness and gumminess in the fruit yogurts (p<.05). But mouth-feel and quality of yogurts showed poor relationships with instrumental parameters. The effective instrumental parameters for predicting sensory viscosity ($Y_{1}$) of yogurts were consistency ($X_{1}$), viscosity ($X_{2}$) and cohesiveness ($X_{3}$). And those for predicting mouth-feel ($Y_{2}$) were consistency. The estimated regression equations were as follows; $Y_{1}=4.968-0.0486X_{1}+0.00012X_{2}+0.0348X_{3},\;Y_{2}=5.701+0.0154X_{1}$.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.312-324
• /
• 2008

To improve the newly designed HKS(hinge kit system) in common refrigerators, it was investigated the new robust methodologies. There were the study of failure modes, mechanisms in the marketplace, and the design parameters of HKS with various improvements using accelerated life testing. Based on the claimed marketplace product returns and 1st ALT reproduction, the fracturing and cracking occur in the housing of the HKS. The missing design parameters of the failed HKS in the design phase of the refrigerator was the housing hinge kit structure. The corrective action plans are the modifications of the housing hinge kit structure from the open supporting to all supporting structure. Based on 2nd ALTs, the fracturing and cracking occur in the torsion shaft. The missing design parameter was the roundness of torsion shaft. After a sequence of ALT testing, the levels of the missing design parameters were setup. The yearly failure rate and B1 life of the redesigned HKS, based on the results of ALT, were over 0.01 percent and 10 years, respectively. The parameter design through the inspection of the failed product, load analysis, and three rounds of ALT, was very effective in the new robust design methodologies of the mechanical system and this method can be applied to other design system.

• Journal of Korea Water Resources Association
• /
• v.47 no.2
• /
• pp.119-133
• /
• 2014

The study adopted extended Kalman filter technique in an effort to predict Z-R relationship parameter as a stable value in real-time. Toward this end, a parameter estimation model was established based on extended Kalman filter in consideration of non-linearity of Z-R relationship. A state-space model was established based on a study that was conducted by Adamowski and Muir (1989). Two parameters of Z-R relationship were set as state variables of the state-space model. As a result, a stable model where a divergence of Kalman gain and state variables are not generated was established. It is noteworthy that overestimated or underestimated parameters based on a conventional method were filtered and removed. As application of inappropriate parameters might cause physically unrealistic rain rate estimation, it can be more effective in terms of quantitative precipitation estimation. As a result of estimation on radar rainfall based on parameters predicted with the extended Kalman filter, the mean field bias correction factor turned out to be around 1.0 indicating that there was a minor difference from the gauge rain rate without the mean field bias correction. In addition, it turned out that it was possible to conduct more accurate estimation on radar rainfall compared to the conventional method.

• Journal of the Korean Magnetics Society
• /
• v.20 no.1
• /
• pp.18-23
• /
• 2010

Ferromagnetic resonance (FMR) measurement is an important experimental technique for the study of magnetic dynamics. We designed and set up the vector network analyzer ferromagnetic resonance (VNA-FMR) measurement system with home made coplanar waveguides (CPW). We examined 10-, 20-, 40-nm thick Py thin films to test the performance of the VNA-FMR measurement system. We measured S-parameter (transmission/reflection coefficient) of Py thin films on a CPW. Resonance frequency is investigated from 2.5 to 7 GHz for a field range from 0 to 490 Oe. The VNA-FMR data shows the resonance frequency increment when the external magnetic field increases. We also investigated Gilbert damping constant of Py thin film using resonance frequency (${\omega}_r$) and linewidth ($\Delta\omega$). After investigating dependence of thickness, we find that an decrease in S-parameter intensity as Py thin film thickness decreases. And the FMR results show that the effective saturation magnetization, $M_{eff}$, increase from 7.205($\pm$0.013) kOe to 7.840($\pm$0.014) kOe, while the film thickness varies from 10 to 40 nm.

• Nuclear Engineering and Technology
• /
• v.14 no.4
• /
• pp.186-195
• /
• 1982

The steam line break accident for Kori Unit 1 is analyzed by a code SYSRAN which calculates nuclear power and heat flux using the point kinetics equation and the lumped-parameter model and calculates system transient using the mass and energy balance equation with the assumption of uniform reactor coolant system pressure. The 1.4 f $t^2$ steam line break accident is analyzed at EOL (End of Life), hot shutdown condition in which case the accident would be most severe. The steam discharge rate is assumed to follow the Moody critical flow model. The results reveal the peak heat flux of 38% of nominal full power value at 60 second after the accident initiates, which is higher than the FSAR result of 26%. Trends for the transient are in good agreement with FSAR results. A sensitivity study shows that this accident is most sensitive to the moderator density coefficient and the lower plenum mixing factor. The DNBR calculation under the assumption of $F_{{\Delta}H}$=3.66, which is used in the FSAR with all the control and the shutdown assemblies inserted except one B bank assembly and of Fz=1.55 shows that minimum DNBR reaches 1.62 at 60 second, indicating that the fuel failure is not anticipated to occur. The point kinetics equation, the lumped-parameter model and the system transient model which uses the mass and energy balance equation are verified to be effective to follow the system transient phenomena of the nuclear power plants.lear power plants.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.57-65
• /
• 2016

This study found a proper parametric life distribution based on maintenance history data of each bridge member under the jurisdiction of the Korea Expressway Corporation for the past 10 years by introducing the concept of reliability and suggested a measure to calculate the mean life and reliability of each bridge member using the parameter obtained with the maximum-likelihood classification. As a result of analyzing the exponential distribution, weibull distribution and log normal distribution being utilized frequently in order to find the parametric life distribution type which well described the life data of each bridge member, it was found that the log normal distribution and weibull distribution described the characteristics of the relevant life data the best. As a result of calculating the mean life of each bridge member based on the estimated parameter, the average life of the steel bridge coating was 18.51 years which was the longest, followed by the bridge deck as 17.56 years. The mean life of the drainage facility and the bridge bearing were 12.27 years and 12.57 years respectively, showing the shortest life.

• Journal of the Korean Magnetics Society
• /
• v.13 no.4
• /
• pp.171-175
• /
• 2003

Electron paramagnetic resonance (EPR) of Fe$^{3+}$ in LiTaO$_3$ single crystal, grown by Czochralski method, has been studied by employing an X-band spectrometer. Resonance spectra of Fe$^{3+}$ ion on the crystallographic principal axes were obtained with 9.447 ㎓ at room temperature. The spectroscopic splitting parameter g and zero-field splitting (ZFS) parameter D (= 3 B$_{2}$sup 0/) are calculated with effective spin Hamiltonian. Fe$^{3+}$ center in stoichometric single crystal turns out to be different with that in congruent single crystal reported previously. From the analysis of temperature dependence of resonance fields for Fe$^{3+}$ ion, there is no any phase transition at the temperature range (from -160 $^{\circ}C$ to 20 $^{\circ}C$).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.1
• /
• pp.81-88
• /
• 2006

The 117 soybean cultivars were collected from nine provinces in Korea, and various seed quality traits along with isoflavone contents were evaluated to elucidate their relationship. The 100-seed weight of the black soybean (31.2 g) was significantly higher (p<0.05) than yellow soybeans (28.6 g). The composition of genistein, daidzein, and glycitein accounted for 75.8, 22.8, and 1.4 % of total isoflavone in yellow soybean cultivars, while their compositions in black soybeans were 58.5, 39.7, and 1.8%, respectively. The mean contents of total isoflavone in yellow and black soybean were $l,561.6{\mu}g\;g^{-1}\;and\;l,018.3{\mu}g\;g^{-1}$. The isofalvone content showed significant variation among cultivars when classified by the seed size. In the yellow soybeans, total isoflavone content was higher in small size soybean cultivars $(1,776.0{\mu}g\;g^{-1})$ and medium size soybean cultivars $(1,714.3{\mu}g\;g^{-1})$ compared to large size ones $(1,518.5{\mu}g\;g^{-1})$. Genistein content was proved as the major factor determining the relationship between isoflavone content and 100-seed weights (r =-0.206*). Daidzein and glycitein, however, showed no significant relationship with the 100-seed weights. Isoflavone content was not significantly correlated with color parameters L (lightness) and a (redness) values, but color parameter b (yellowness) was positively correlated with glycitein (r=0.264*) in the yellow soybeans, while its negative correlation between daidzein (r=-0.245*) and total isoflavone (r=-0.256*) were observed in black soybeans. However, these findings suggested that the seed color value may not serve as an effective parameter for estimating the isoflavone intensity of the soybeans. Variation of protein and lipid contents between yellow soybeans (n=58) and black soybeans (n=59) was relatively stable, however, protein and lipid contents have no significant relationship with isoflavone content.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.109-117
• /
• 2009

In this paper, an analytical model using equivalent magnetic circuits for the PMA-SynRG is presented. The lumped parameter model (LPM) is developed from machine geometry, stator winding and machine operating specifications. By the LPM, magnetic saturation of rotor bridges is incorporated into model and it provides effective means of predicting machine performance for a given machine geometry. The LPM is not as accurate as finite element analysis but the equivalent magnetic circuits provide fast means of analyzing electromagnetic characteristics of PMa-SynRG. It is the main advantage to find the initial design and optimum design. The initial design of PMa_RSG is performed by LPM model and FEM analysis, and the final PMA-RSG design is optimized and identified by FEM analysis considering actual machine design. The linear LPM and the nonlinear LPM are programmed using MATLAB and all of machine parameters are calculated very quickly. To verify justification of the proposed design of PMa-RSM, back-EMF is measured.