• Title/Summary/Keyword: effective parameter

Search Result 1,653, Processing Time 0.033 seconds

Hints for possible low redshift oscillation around the best-fitting ΛCDM model in the expansion history of the Universe

  • L Kazantzidis;H Koo;S Nesseris;L Perivolaropoulos;A Shafieloo
    • Monthly Notices of the Royal Astronomical Society
    • /
    • v.501 no.3
    • /
    • pp.3421-3426
    • /
    • 2021
  • We search for possible deviations from the expectations of the concordance ΛCDM model in the expansion history of the Universe by analysing the Pantheon Type Ia Supernovae (SnIa) compilation along with its Monte Carlo simulations using redshift binning. We demonstrate that the redshift binned best-fitting ΛCDM matter density parameter Ω0m and the best-fitting effective absolute magnitude 𝓜 oscillate about their full data set best-fitting values with considerably large amplitudes. Using the full covariance matrix of the data taking into account systematic and statistical errors, we show that at the redshifts below z ≈ 0.5 such oscillations can only occur in 4 to 5 per cent of the Monte Carlo simulations. While statistical fluctuations can be responsible for this apparent oscillation, we might have observed a hint for some behaviour beyond the expectations of the concordance model or a possible additional systematic in the data. If this apparent oscillation is not due to statistical or systematic effects, it could be due to either the presence of coherent inhomogeneities at low z or due to oscillations of a quintessence scalar field.

Aerodynamic characteristics of wavy splitter plate on circular cylinder

  • Liang Gao;J. Jegadeeshwaran;S. Ramaswami;S. B. M. Priya;S. Nadaraja Pillai
    • Wind and Structures
    • /
    • v.37 no.5
    • /
    • pp.375-382
    • /
    • 2023
  • The aerodynamic characteristics of a circular cylinder with a wavy splitter plate were experimentally studied, specifically the potential reduction of drag and fluctuations in drag. To study the individual effects of amplitude and wavelength, the experiments were conducted by varying one parameter at a time while holding the other one constant. To study the effect of amplitude (A), the wavelength to diameter ratio (λ/D) was fixed at 0.115 and the amplitude to diameter ratio (A/D) was varied as 0.005, 0.010, 0.015 and 0.020. Similarly, to study the effect of wavelength, A/D was fixed as 0.020 and λ/D was varied as 0.46, 0.23, 0.15 and 0.12. Analysis of the data indicated that the wavy splitter plate caused a significant reduction in both the magnitude and the fluctuation of drag. The variation of aerodynamic forces and the fluctuations with them corresponding to different Reynolds numbers were computed and the spectral aspects of fluctuating forces due to vortex shedding is analysed and effective reduction in both shedding frequency and magnitude was observed.

Acceleration-based fuzzy sliding mode control for high-rise structures with hybrid mass damper

  • Zhenfeng Lai;Yanhui Liu;Dongfan Ye;Ping Tan;Fulin Zhou
    • Smart Structures and Systems
    • /
    • v.33 no.6
    • /
    • pp.431-447
    • /
    • 2024
  • The Hybrid Mass Damper (HMD) has proven effective in mitigating vibrations in high-rise structures subject to seismic and wind-induced excitations. One derivative configuration of the HMD mounts an Active Mass Damper (AMD) atop a Tuned Mass Damper (TMD). However, the control efficacy of such HMDs may be compromised when confronted with loads that exceed their design parameters. Additionally, the confined structural space within high-rise structures often limits the feasibility and economic viability of retrofitting HMD systems. This study introduces an Acceleration-based Fuzzy Power Approach Rate Sliding Mode Control (AFP-SMC) algorithm aimed at enhancing the control efficacy of HMDs while minimizing their stroke and force output requirements. Employing the Canton Tower as a research prototype, an analytical model incorporating HMDs was established, and a comparative analysis between the AFP-SMC and Linear Quadratic Gaussian (LQG) control algorithms was conducted for efficacy. The control performance of the AFP-SMC control algorithm under different control parameter variations was investigated. Furthermore, by experimentally assessing the AMD subsystem within the Canton Tower, friction and ripple force formulas were derived to bolster the analytical model, thereby validating the robustness of the AFP-SMC algorithm. The results show that the proposed AFP-SMC algorithm effectively reduces the vibration response of the structure and the stroke and control force output of HMDs, and exhibits superior overall control performance and robustness compared to the LQG algorithm.

Analysis of fMRI Signal Using Independent Component Analysis (Independent Component Analysis를 이용한 fMRI신호 분석)

  • 문찬홍;나동규;박현욱;유재욱;이은정;변홍식
    • Investigative Magnetic Resonance Imaging
    • /
    • v.3 no.2
    • /
    • pp.188-195
    • /
    • 1999
  • The fMRI signals are composed of many various signals. It is very difficult to find the accurate parameter for the model of fMRI signal containing only neural activity, though we may estimating the signal patterns by the modeling of several signal components. Besides the nose by the physiologic motion, the motion of object and noise of MR instruments make it more difficult to analyze signals of fMRI. Therefore, it is not easy to select an accurate reference data that can accurately reflect neural activity, and the method of an analysis of various signal patterns containing the information of neural activity is an issue of the post-processing methods for fMRI. In the present study, fMRI data was analyzed with the Independent Component Analysis(ICA) method that doesn't need a priori-knowledge or reference data. ICA can be more effective over the analytic method using cross-correlation analysis and can separate the signal patterns of the signals with delayed response or motion related components. The Principal component Analysis (PCA) threshold, wavelet spatial filtering and analysis of a part of whole images can be used for the reduction of the freedom of data before ICA analysis, and these preceding analyses may be useful for a more effective analysis. As a result, ICA method will be effective for the degree of freedom of the data.

  • PDF

The Dose and Risk Reduction from Adoption of Automatic mA Control in 4D CT Scans (자동전류조절기능을 사용한 4D CT 촬영시 선량 및 위험도 저감 효과)

  • Ko, Young Eun;Je, Hyoung Uk;Hwang, Yeon;Park, Sung Ho
    • Progress in Medical Physics
    • /
    • v.26 no.4
    • /
    • pp.267-272
    • /
    • 2015
  • In this study, the reduction of dose and risk was evaluated from using automatic mA control in 4D CT scan of patients whose organ movement was considered for gated radiotherapy. The organ doses, CTDI, effective doses from 4D CT with and without using automatic mA control were evaluated using CT-Expo program for each 10 patients of liver and lung cancer, and the risk of exposure induced death and loss of life expectancy were evaluated using PCXMC program. It was founded that there were 26.8%, and 15.5% dose reduction in organ doses and CTDI for liver and lung cancer patients and 16.5% and 19.8% risk reduction in liver and lung cancer patients. The organ doses and effective doses were evaluated for the parameter of each patient used in CT scans, and risks considering age and gender could be evaluated. It was founded that there were 21.2% dose reduction and 18.2% risk reduction in 4D CT scan using AEC for liver and lung cancer patients.

Experimental Study on the Unsaturated Characteristics of Dredging Soils at Saemangeum Area (새만금지역 준설토의 불포화 특성에 대한 실험적 연구)

  • Song, Young-Suk;You, Seung-Kyong
    • Journal of the Korean Geosynthetics Society
    • /
    • v.10 no.3
    • /
    • pp.25-32
    • /
    • 2011
  • The matric suction and volumetric water content of dredging soils obtained from Saemangeum area were measured by the automated Soil-Water Characteristic Curve (SWCC) apparatus under both drying and wetting conditions. Based on the test result, SWCCs of the dredging soils were estimated by the van Genuchten(1980) model. The matric suction of drying process is larger than that of wetting process at a same effective degree of saturation. The suction stresses for various matirc suctions were estimated using Lu and Likos(2006) model and the Suction Stress Characteristic Curves (SSCC) were predicted using the independent parameter of SWCC. The suction stress of drying path was increased and decreased, while the suction stress of wetting path was continuously decreased with increasing the effective degree. Also, the suction stress of drying path is larger than that of wetting path at a same effective degree of saturation. The Hydraulic Conductivity Function(HCF) was also predicted by the van Genuchten(1980) model. The hydraulic conductivity was increased with increasing the volumetric water content. The hydraulic conductivity of drying path is larger than that of wetting path at a same matric suction. According to the results of SWCCs and SSCCs, the hysteresis phenomenon of suction stress or matric suction during both drying and wetting paths was occurred. The main reason of hysteresis phenomenon is a ink bottle effect of water among soil particles.

A Study on the Selection of AMC of Curve Number (유출곡선지수의 선행토양함수조건 선정 기준 연구)

  • Kim, Jee-Sang;Ahn, Jaehyun
    • Journal of Wetlands Research
    • /
    • v.14 no.4
    • /
    • pp.519-535
    • /
    • 2012
  • In order to establish a rainfall-runoff model, calibration of hydrological parameters for the model is very important. Especially, Curve Number(CN), estimated by NRCS method, is a main factor to apply unit hydrograph theory to calculation of peak discharge. For using NRCS method, it is needed selecting AMC because CN is strongly connected with that. In this study, we focus our concern on finding a applicable standard for selecting AMC for CN. For this, three dams which are Boryeong, Habchon, Namgang are selected as target basins to use observed data including rainfall and dam inflow. As a result of this research, it is found that CN must be included as a calibrated parameter to calculate effective rainfall for the rainfall-runoff model. Also, it is preferred to use PWRMSE of HEC-HMS program as a objective function for optimizing hydrological parameters. From the analyzing result of variation of AMC for peak discharge, it is recommended to apply AMC-III to estimation of CN for calculating effective rainfall of design hydrograph.

Effects of established cell lines on bovine embryo development during in vitro culture (계대세포를 이용한 소 수정란의 체외배양 체계에 관한 연구)

  • Joo, Suk-chun;Lee, Byeong-chun;Lee, Won-yu;Choi, Yun-seok;Hwang, Woo-suk
    • Korean Journal of Veterinary Research
    • /
    • v.37 no.3
    • /
    • pp.647-659
    • /
    • 1997
  • To overcome the difficulties of collecting and culture of primary cell from genital tract on embryonic development, the present study was carried out to investigate the critical effect of cell lines, such as BRL and Vero cell and its conditioned medium on the development of early Korean native cattle embryos in vitro. Oocytes collected from slaughterhouse ovaries were matured in TCM199 containing FSH, estradiol-$17{\beta}$ and FBS with granulosa cell monolayer for 24 hours and then fertilized in vitro using frozen-thawed, heparin-treated spermatozoa in TALP for 30 hours. And then early embryos (1-2cell) were cultured in TCM199 containing 10% FBS with BOEC, Granulosa, BRL, Vera cell monolayers and conditioned medium for 2~3 days. Development to morulae and blastocysts were recorded, also examined the number of blastomeres presented a valuable parameter for the evaluation of embryonic development. The early cleavage rates of in vitro fertilized embryos co-cultured, there was no differences between primary cell and cell lines(p<0.05). The rate of development to the later stage, coculture of BRL cell was significantly higher than that of the primary cell(p<0.05). The rates of development to morula and blastocyst were significantly higher in vero cell than BRL, Granulosa, Oviduct epithelial cell conditioned medium. In the result of effect of serum on development of early bovine embryos, the use of media containing serum were significantly higher than the use of not containing one on development of early and later stage of embryos. The result of number of blastomeres in blastocysts, there is no differences between primary cell and cell lines. The blastocysts from coculture were higher than from conditioned medium in blastomere cells. In summary, these experments have proved that the culture system in TCM199 with BRL, Vero cell monolayers is effective on in vitro development of early bovine embryos, In addition, it is effective to development of bovine embryos that containing serum in conditioned medium, or in co-culture rather than in conditioned medium alone. The use of cell lines opponent to primary cells is effective in bovine embryo culture.

  • PDF

Effect of Health Education Method for Korean Patients with Essential Hypertension on Their Compliance with Health Behaviors (보건교육방법이 본태성 고혈압 환자의 건강행위 이행에 미치는 효과)

  • 손경욱;유왕근
    • Korean Journal of Health Education and Promotion
    • /
    • v.21 no.2
    • /
    • pp.215-231
    • /
    • 2004
  • The purpose of this study was to examine what factors affected patients who suffered from essential hypertension compliance with health behaviors, to help build a successful strategy to step up their compliance with health behaviors, and to seek effective ways to implement health education programs for patients with chronic disease. The subjects in this study were 60 people selected from among the patients who were diagnosed by physicians as having essential hypertension in S General Hospital in the city of P from April 10 through July 30, 2000, after health education was provided four times a month. The quasi- experimental design based on a control group pretest-posttest design was employed. The subjects were divided into three groups of 20 patients each: one was an experimental group to receive education in one-to-one interview, another was an experimental group to receive education as a group, and the third was a control group. The two experimental groups learned the same material through different methods, and the control group was given the same teaching materials and asked to comply with health behaviors on their own without instruction. After the three-week education was implemented in different ways, their compliance with health behaviors was measured. Collected data was analyzed by t-test, paired test, one-way analysis of variance, correlation analysis and regression analysis procedures. The findings of this study were as follows: 1. Concerning the effective type of health education, the group education produced the best results, followed by the one-to-one interviews and the sole use of print media. 2. Regarding the effect of compliance with health behaviors, the group- educated group got the highest score in compliance with health behaviors, but blood pressure lowered more significantly in the individual interview group. And the compliance with health behaviors had a significant negative correlational relationship with both systolic and diastolic blood pressure. 3. Parameter that had most significant correlational relationship with compliance with health behaviors was health locus of control, followed by self-efficacy and health perception. But there was no significant correlational relationship between compliance with health behaviors and knowledge of hypertension. 4. As a result of analyzing the impact of knowledge of hypertension, health locus of control, self-efficacy and health perception on compliance with health behaviors, self-efficacy was found to exercise most influence. Above-mentioned findings suggested that group education or one- to-one discussion would be more effective for health care for hypertension in koreans, as they could serve to have patients realize their own responsibility for health and to motivate their compliance with health behaviors, and there was a need to more positively utilize educational intervention for patients with chronic diseases, which could elevate not only compliance with health behaviors but self-efficacy.

Development and Application of the Catchment Hydrologic Cycle Assessment Tool Considering Urbanization (I) - Model Development - (도시화에 따른 물순환 영향 평가 모형의 개발 및 적용(I) - 모형 개발 -)

  • Kim, Hyeon-Jun;Jang, Cheol-Hee;Noh, Seong-Jin
    • Journal of Korea Water Resources Association
    • /
    • v.45 no.2
    • /
    • pp.203-215
    • /
    • 2012
  • The objective of this study is to develop a catchment hydrologic cycle assessment model which can assess the impact of urban development and designing water cycle improvement facilities. Developed model might contribute to minimize the damage caused by urban development and to establish sustainableurban environments. The existing conceptual lumped models have a potential limitation in their capacity to simulate the hydrologic impacts of land use changes and assess diverse urban design. The distributed physics-based models under active study are data demanding; and much time is required to gather and check input data; and the cost of setting up a simulation and computational demand are required. The Catchment Hydrologic Cycle Assessment Tool (hereinafter the CAT) is a water cycle analysis model based on physical parameters and it has a link-node model structure. The CAT model can assess the characteristics of the short/long-term changes in water cycles before and after urbanization in the catchment. It supports the effective design of water cycle improvement facilities by supplementing the strengths and weaknesses of existing conceptual parameter-based lumped hydrologic models and physical parameter-based distributed hydrologic models. the model was applied to Seolma-cheon catchment, also calibrated and validated using 6 years (2002~2007) hourly streamflow data in Jeonjeokbigyo station, and the Nash-Sutcliffe model efficiencies were 0.75 (2002~2004) and 0.89 (2005~2007).