• International Journal of Fluid Machinery and Systems
• /
• v.7 no.3
• /
• pp.86-93
• /
• 2014

This paper describes performance enhancement of a regenerative blower used for a 20 kW fuel cell system. Two design variables, bending angle of an impeller and blade thickness of an impeller tip, which are used to define an impeller shape, are introduced to enhance the blower performance. Internal flow of the regenerative blower has been analyzed with three-dimensional Navier-Stokes equations to obtain the blower performance. General analysis code, CFX, is introduced in the present work. SST turbulence model is employed to estimate the eddy viscosity. Throughout the numerical analysis, it is found that the thickness of impeller tip is effective to increase the blower efficiency in the present blower. Pressure is successfully increased up to 2.8% compared to the reference blower at the design flow condition. And efficiency is also enhanced up to 2.98 % compared to the reference one. It is noted that low velocity region disturbs to make strong recirculation flow inside the blade passages, thus increases local pressure loss. Detailed flow field inside the regenerative blower is also analyzed and compared.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.488-497
• /
• 2020

The present study investigates the feasibility of nitrogenous heterocyclic compounds (NHCs) (Pyridine-Quinoline) degradation by catalytic wet peroxidation (CWPO) in the presence of nanoscale zerovalent iron supported on granular activated carbon (nFe⁰/GAC) using statistical optimization technique. Response surface methodology (RSM) in combination with Box-Behnken design (BBD) was used to optimize the process parameters of CWPO process such as initial pH, catalyst dose, hydrogen peroxide dose, initial concentration of pyridine (Py) and quinolone (Qn) were chosen as the main variables, and total organic carbon (TOC) removal and total Fe leaching were selected as the investigated response. The optimization of process parameters by desirability function showed the ~85% of TOC removal with process condition of initial solution pH 3.5, catalyst dose of 0.55 g/L, hydrogen peroxide concentration of 0.34 mmol, initial concentration of Py 200 mg/L and initial concentration of Qn 200 mg/L. Further, for TOC removal the analysis of variance results of the RSM revealed that all parameter i.e. initial pH, catalyst dose, hydrogen peroxide dose, initial concentration of Py and initial concentration of Qn were highly significant according to the p values (p < 0.05). The quadratic model was found to be the best fit for experimental data. The present study revealed that BBD was reliable and effective for the determination of the optimum conditions for CWPO of NHCs (Py-Qn).

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.429-438
• /
• 1994

An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate eleclromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocnemius m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher'stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical slimulator restored partially gait function in paraplegic patients.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.107-117
• /
• 2016

This study investigates design strategies for improving the educational quality of multimedia contents for early childhood education. It emphasizes both traditional education theory and developmental aspects in its exploration of interactive and educational qualitative multimedia contents for early children. Accordingly, for an effective early childhood education, it is necessary to experience of the playful learning for the conception of ideas and the understanding of the social life. Because this study 1) possibility of multimedia contents for early childhood education, 2) computer application method for early childhood education, 3) examines used in the designing of multimedia contents for early childhood education according to traditional education theory. Multimedia early childhood education system is possible to organize information such as test, image, sound and video based on hyperlink system. I use Microsoft's Ms-office and Asymetrix's ToolBook software that are useful for hyperlink and parameter. Multimedia contents and other pages are used by Dynamic Data Exchange(DDE). Therefore multimedia contents for early childhood education is a useful tool for students of early childhood education department, parents, and children.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.25-34
• /
• 2012

In this study, in the process of testing before the release of the software products designed, software testing manager in advance should be aware of the testing-information. Therefore, the effective learning effects perspective has been studied using the NHPP software. The finite failure nonhomogeneous Poisson process models presented and applied property of learning effect based on truncated time and delayed S-shaped software reliability. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than autonomous errors-detected factor that is generally efficient model can be confirmed. This paper, a failure data analysis was performed, using time between failures, according to the small sample and large sample sizes. The parameter estimation was carried out using maximum likelihood estimation method. Model selection was performed using the mean square error and coefficient of determination, after the data efficiency from the data through trend analysis was performed.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.669-676
• /
• 2002

The efficiency of marker assisted selection(MAS) over conventional selection index based sorely on phenotypic records was studied by deterministic simulation model. Parameter combination of heritability and amount of genetic variation due to the markers included in the index was employed. For the index with own phenotypic information vs. the index with own phenotypic plus marker information, the relative efficiency of MAS over the selection with phenotypic records was about 38% high when heritability was low(0.05). However, when heritability was high(50%), the relative efficiency of MAS was vary low and almost negligible. For more practical situation of selection index which included information on own, sire and dam, MAS was less effective than when selection criteria was only on own performance.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.96-104
• /
• 2006

In the present paper, the effects of combustion instability on flow structure and flame dynamic with the configurations of burner exit in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. As a result of mean flow field, the change of divergent half angle(${\alpha}$) at burner exit results in variations in the size and shape of the central toroidal recirculation(CTRZ) as well as flame length by changing corner recirculation zone(CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than that of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is the most shortest, while that in the case of ${\alpha}=30^{\circ}$ is the longest by the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it is identified that the case of ${\alpha}=45^{\circ}$ shows the most largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, comparing with that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons are discussed in detail through the analysis of unsteady phenomena about recirculation zone and flame surface. Finally the effects of flame-acoustic interaction are evaluated using local Rayleigh parameter.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.9-13
• /
• 1997

The present study was designed to develop the functional electrical stimulation system in order to restore motor function of paralytic patients. We attempt to establish adequate stimulus parameters for the recovery of work unction in lower limb paralysis patients and to develop the electrical stimulation system, which is effective to protect foot drop in these patients. In our animal and human experiment, adequate stimulus condition for surface electrode on the lower limb were 0.2-0.3ms at the duration and 50 Hz, which contain 600Hz train pulse. This parameter has efficiently prevented the foot drop from lower limb paralysis, decreased muscle fatigue and induced powerful contraction of lower limb muscle.

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.138-152
• /
• 2003

Three-dimensional computer modeling using FLAC3D had been carried out fur evaluating the thermal-mechanical stability of a high-level radioactive waste repository excavated in several hundred deep location. For effective modeling, a FISH program was made and the geological conditions and rock properties achieved from the drilling sites in Kosung and Yusung areas were used. Sensitivity analysis fer the stresses and temperatures from the modeling designed utilizing fractional factorial design was carried out. From the sensitivity analysis, the important design parameters and their interactions could be determined. From this study, it was found that deposition hole spacing is the most important parameter on the thermal and mechanical stability. The second and third most important parameters were disposal tunnel and buffer thickness.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.499-505
• /
• 2012

The fuel cell is a very promising power generation system combining the benefits of extremely low emissions, high efficiency, ease of maintenance and durability. In order to promote the commercialization of fuel cells, a flexible forming process, in which a hyper-elastic rubber is adopted as a medium to transmit forming pressure, is suggested as an efficient and cost effective manufacturing method for fuel cell bipolar plates. In this study, the ability of this flexible forming process to produce the micro channel arrays on metallic bipolar plates was first demonstrated experimentally. Then, a finite element (FE) model was built and validated through comparisons between simulated and experimental results. The effects of key process parameters on the forming performance such as applied load and punch velocity were investigated. As a result, appropriate process parameter values allowing high dimensional accuracy without failure were suggested.