• Tuberculosis and Respiratory Diseases
• /
• v.73 no.5
• /
• pp.282-287
• /
• 2012

Broncholiths are defined as calcified materials that occur in a tracheobronchial tree or in a cavity communicating with that. Broncholith has variable clinical features. The therapeutic options to remove broncholiths are so variable that clinicians need to select the most safe and effective methods by mass size, mobility, and location. As yet, there is no consistent guideline removing a broncholith. We report 2 successful cases of removing a fixed broncholith by flexible bronchoscopy guided cryoadhesion. With repeated technique of thawing and freezing with cryoprobe, we could extract the fixed broncholith safely. This method is promising as a way to remove broncholith in the future.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.754-757
• /
• 2012

In this report, we fabricate the porous graphene films through embossing process and vacuum filtration method and demonstrate their superior electrochemical properties as supercapacitor electrode materials. Insertion/removal of polystyrene nanoparticles between the graphene sheets allows to provide pore structures, leading to the effective prevention of restacking in graphene films. As-prepared porous graphene films have a large surface area, a bicontinuous porous structures, high electrical conductivity, and excellent mechanical integrity. The electrochemical properties of the porous graphene films as electrode materials of supercapacitor are investigated by using aqueous $H_2SO_4$ and ionic liquid solution under three-electrode system. The porous graphene films exhibit a high specific capacitance (284.5 F/g), which is two-fold higher than that of packing graphene films (138.9 F/g). In addition, the rate capability (98.7% retention) and long-term cycling stability (97.2%) for the porous graphene films are significantly enhanced, due to the facilitated ion mobility between the graphene layers.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.529-536
• /
• 2015

This study was performed to provide important basic data for the preservation and management of Scopura laminata, a species endemic to Korea, by elucidating the spatial characteristics of its present, potential, and future distribution areas. Currently, this species is found in the Odaesan National Park area of South Korea and has been known to be restricted in its habitat due to its poor mobility, as even fully grown insects do not have wings. Utilizing the MaxEnt model, 20 collection points around Odaesan National Park were assessed to analyze and predict spatial distribution characteristics. The precision of the MaxEnt model was excellent, with an AUC value of 0.833. Variables affecting the potential distribution area of S. laminata by more than 10% included the range of annual temperature, seasonality of precipitation, and precipitation of the driest quarter, in order of greatest to least impact. Compared to the current potential distribution area, no significant difference in the overall habitable area was predicted for the 2050s or 2070s. It was, however, demonstrated that the potential habitable area would be reduced in the 2050s by up to 270.3 km from the current area of 403.9 km; further, no potential habitable area was anticipated by the 2070s according to our predictive model. Taken together, it is anticipated that this endemic species could be significantly affected by climate changes, and hence effective countermeasures are strongly warranted for the preservation of habitats and species management.

• Journal of Korean Society of Transportation
• /
• v.29 no.4
• /
• pp.113-123
• /
• 2011

Traffic signal control is one of the most cost-effective means of improving urban mobility. With the recent progress of ITS (Intelligent Transportation System) and the installation of the real time traffic control systems, traffic signal control is conducted in online and real time. Normally, time-of-day (TOD) signal control is used with the system, but no definite methodology has yet been available for efficient TOD signal planing designing. Such method and process are in need to optimize the traffic signal timing plan. This paper proposes the optimization of TOD signal timings on arterials. The effects of the signal timings from the proposed method were assessed in the field. The proposed includes the methods determining the separation of the TOD break points and the TOD intervals. Those were tested on an arterial consisting of ten coordinated signalized intersections. It was found from the test results that the proposed TOD signal timing plans outperformed the previous signal timings.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.379-385
• /
• 2012

This paper suggests U-healthcare system for individual health management realizing the gateway, client, and Java-based network server by using the vital signal measuring system and android-based mobile platform. This study realized the vital signal measuring system based on the technology to measure the ECG, oxygen saturation, blood pressure, and respiration, etc. And all the information of measurement was transmitted to the mobile gateway using the 3-bite transmission protocol consisting of headers and data. The data transmitted to the mobile gateway was used to examine the mobile client's personal health indexes through the network server. This paper realized and tested the android-based gateway, client, and the broadcasting network server and verified their validity with simulations and actual humans. As a result, the U-healthcare system suggested was proved to be effective in managing each individual's health from short distance and long distance. And it could examine each individual's health conditions in real-time and was found to be advantageous in that it could secure the guardian's mobility.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.225-234
• /
• 2012

In Wireless Sensor Networks (WSNs) where deployed sensors are not stationary, the most important demand of is to design a cost effective and reliable network. This paper proposes an energy aware network construction and routing scheme, which is based on the hierarchical approach to distribute the task in some sensors in order to prolong the network lifetime. It aims to make even the energy consumption on constitute nodes. With the node hierarchy, the sink initiates the construction by electing gateway nodes in the network and the elected gateway nodes participate to form logical clusters by electing a cluster head in each cluster. Then, the cluster heads aggregate data from the sensing sensors and transmit the data to the sink through the gateway. Our simulation result illustrates that the proposed scheme provides a basement to reduce the source of energy dissipation in network construction, and as well as in data routing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.198-203
• /
• 2016

We investigate the effects of magnesium (Mg) suppressor layer on the electrical performances and stabilities of amorphous indium-zinc-tin-oxide (a-ITZO) thin-film transistors (TFTs). Compared to the ITZO TFT without a Mg suppressor layer, the ITZO:Mg TFT exhibits slightly smaller field-effect mobility and much reduced subthreshold slope. The ITZO:Mg TFT shows improved electrical stabilities compared to the ITZO TFT under both positive-bias and negative-bias-illumination stresses. From the X-ray photoelectron spectroscopy O1s spectra with fitted curves for ITZO and ITZO:Mg films, we observe that Mg doping contributes to an enhancement of the oxygen bond without oxygen vacancy and a reduction of the oxygen bonds with oxygen vacancies. This result shows that the Mg can be an effective suppressor in a-ITZO TFTs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.294.1-294.1
• /
• 2016

Transition metal dichalcogenides (TMDs) with two-dimensional layered structure, such as molybdenum disulfide (MoS2) and tungsten diselenide (WSe2), are considered attractive materials for future semiconductor devices due to its relatively superior electrical, optical, and mechanical properties. Their excellent scalability down to a monolayer based on the van der Waals layered structure without surface dangling bonds makes semiconductor devices based on TMD free from short channel effect. In comparison to the widely studied transistor based on MoS2, researchs focusing on WSe2 transistor are still limited. WSe2 is more resistant to oxidation in humid ambient condition and relatively air-stable than sulphides such as MoS2. These properties of WSe2 provide potential to fabricate high-performance filed-effect transistor if outstanding electronic characteristics can be achieved by suitable metal contacts and doping phenomenon. Here, we demonstrate the effect of two different metal contacts (titanium and platinum) in field-effect transistor based on WSe2, which regulate electronic characteristics of device by controlling the effective barreier height of the metal-semiconductor junction. Electronic properties of WSe2 transistor were systematically investigated through monitoring of threshold voltage shift, carrier concentration difference, on-current ratio, and field-effect mobility ratio with two different metal contacts. Additionally, performance of transistor based on WSe2 is further enhanced through reliable and controllable n-type doping method of WSe2 by triphenylphosphine (PPh3), which activates the doping phenomenon by thermal annealing process and adjust the doping level by controlling the doping concentration of PPh3. The doping level is controlled in the non-degenerate regime, where performance parameters of PPh3 doped WSe2 transistor can be optimized.

• Biomedical Science Letters
• /
• v.23 no.1
• /
• pp.17-24
• /
• 2017

Estrogens are effective neuroprotectants in vivo and in vitro. To obtain a better insight into the molecular mechanisms of action of neuroprotection by $17{\beta}-estradiol$ (E2), we examined the differential effects of E2 on the fluidity of synaptosomal plasma membrane vesicles (SPMV) isolated from rat cerebral cortex. Intramolecular excimerization of 1,3-di(1-pyrenyl)-propane (Py-3-Py) was used to investigate the effects of E2 on the bulk and annular lateral diffusion of the SPMV. In addition, we examined the effects of E2 on the rotational diffusion of individual leaflet of SPMV exploiting selective quenching of outer monolayer 1,6-diphenyl-1,3,5-hexatriene (DPH) fluorescence by trinitrophenyl groups. The $F{\ddot{o}}rster$ distance $R_0$ value for the tryptophan-Py-3-Py donor-acceptor pair was $26.9{\AA}$. E2 increased the lateral mobility of both bulk and annular lipids in SPMV in a dose-dependent manner, but a larger effect on bulk lipids was observed. Although E2 decreased the anisotropy of DPH in SPMV, E2 had a greater fluidizing effect on the outer leaflet compared to the inner leaflet. These results suggest that E2 selectively fluidizes the more fluid regions within SPMV. It is highly probable that E2 mostly fluidizes the bulk lipids, away from either annular lipids or lipid rafts, in the outer leaflet of SPMV. This selective fluidization may be one of the nongenomic mechanisms of neuroprotection by E2.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.23.1-23.1
• /
• 2009

ZnO is of great interest for various technological applications ranging from optoelectronics to chemical sensors because of its superior emission, electronic, and chemical properties. In addition, vertically well-aligned ZnO nanorods on large areas with good optical and structural properties are of special interest for the fabrication of electronic and optical nanodevices. To date, several approaches have been proposed for the growth of one-dimensional (1D) ZnO nanostructunres. Several groups have been reported the MOCVD growth of ZnO nanorods with no metal catalysts at $400^{\circ}C$, and fabricated a well-aligned ZnO nanorod array on a PLD prepared ZnO film by using a catalyst-free method. It has been suggested that the synthesis of ZnO nanowires using a template-less/surfactant-free aqueous method. However, despite being a well-established and cost-effective method of thin film deposition, the use of magnetrons puttering to grow ZnO nanorods has not been reported yet. Additionally,magnetron sputtering has the dvantage of producing highly oriented ZnO film sat a relatively low process temperature. Currently, more effort has been concentrated on the synthesis of 1D ZnO nanostructures doped with various metal elements (Al, In, Ga, etc.) to obtain nanostructures with high quality,improved emission properties, and high conductance in functional oxide semiconductors. Among these dopants, Ga-doped ZnO has demonstrated substantial advantages over Al-doped ZnO, including greater resistant to oxidation. Since the covalent bond length of Ga-O ($1.92\;{\AA}$) is nearly equal to that of Zn-O ($1.97\;{\AA}$), high electron mobility and low electrical resistivity are also expected in the Ga-doped ZnO. In this article, we report the successful growth of Ga-doped ZnO nanorods on c-Sapphire substrate without metal catalysts by magnetrons puttering and our investigations of their structural, optical, and field emission properties.