• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.202-207
• /
• 2011

Organic fertilizers are divided into natural organic and synthetic organics. The benefits of natural organic fertilizer were reported from the previous researches. However, the limited research results about clippings as a source of natural organic fertilizers were reported. The objective of the research to investigate effects of liquid fertilizer produced from fermented clippings for creeping bentgrass growth. Liquid fertilizer (LF) produced was used for the research to be compared with Urea and two natural organic fertilizers of different source (NO-1 and NO-2). Creeping bentgrass (Agrostis stolonifera L., L-93) was used for the study. Turfgrass quality was measured by visual evaluation every two weeks from June to October, 2011 using a scale of 1 to 9 (1=worst, 6=acceptable, and 9=best). Turfgrass disease damage was measured by percent of area damaged when a turfgrass disease occurred. LF produced lower damage than NO and urea when temperature was high. Although NO-2 produced the highest or equal to the highest turfgrass quality in June and October, LF had the highest or equal to the highest quality from July to September.

• Clean Technology
• /
• v.23 no.4
• /
• pp.345-356
• /
• 2017

The composting is a biological process that converts organic matter into useful resources such as fertilizers. It is a continuous transition of microbial communities to adapt changes in organic matter and environmental conditions (carbonation rate, temperature, humidity, oxygen supply, pH, etc.). Most of the composting plants are located in the proximity of the residential areas. It is a general scenario where government authorities receive complaints from the local residents due to release of odor from the composting, and has become a social problem in Korea. Identification of dominant microorganisms, understanding change in microbial communities and augmentation of specific microorganism for composting is vital to enhance the efficiency of composting, quality of the compost produced, and reduction of odor. In this paper, we suggest the optimum operation conditions and methods for compost depot to reduce odor generation. The selection of the appropriate microorganisms and their rapid increase in population are effective to promote composting. The optimal growth conditions of bacteria such as aeration (oxygen), temperature, and humidity were standardized to maximize composting through microbial degradation. The use of porous minerals and moisture control has significantly improved odor removal. Recent technologies to reduce odor from the composting environment and improved composting processes are also presented.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.6
• /
• pp.727-735
• /
• 2007

The use of water by cities is increasing owing to industrialization, the concentration of population, and the enhancement of the standard of living. Accordingly, the amount of waste water is also increasing, and the degree of pollution of the water system is rising. In order to solve this problem, it is necessary to remove organisms and suspended particles as well as the products of eutrophication such as nitrates and phosphates. This study developed a high-end treatment engineering solution with maximum efficiency and lower costs by researching and developing a advanced treatment engineering solution with the use of Biosorption. As a result, the study conducted a test with a $50m^3/day$ Pilot Scale Plant by developing treatment engineering so that only the secondary treatment satisfies the standard of water quality and which provided optimal treatment efficiency along with convenient maintenance and management. The removal of organisms, which has to be pursued first for realizing nitrification during the test period, was made in such a way that there would be no oxidation by microorganisms in the reactor while preparing oxygen as an inhibitor for the growth of microorganism in the course of moving toward the primary settling pond. The study introduced microorganisms in the endogeneous respiration stage to perform adhesion, absorption, and filtering by bringing them into contact with the inflowing water with the use of a sludge returning from the secondary settling pond. Also a test was conducted to determine how effective the microorganisms are as an inner source of carbon. The HRT(Hydraulic Retention Time) in the nitrification tank (aerobic tank) could be reduced to two hours or below, and the stable treatment efficiency of the process using the organisms absorbed in the NAR reactor as a source of carbon could be proven. Also, given that the anaerobic condition of the pre-treatment tank becomes basic in the area of phosphate discharge, it was found that there was excellent efficiency for the removal of phosphate when the pre-treatment tank induced the discharge of phosphate and the polishing reactor induced the uptake of phosphate. The removal efficiency was shown to be about 94.4% for $BOD_5$. 90.7% for $COD_{Cr}$ 84.3% for $COD_{Mn}$, 96.0% for SS, 77.3% for TN, and 96.0% for TP.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.1
• /
• pp.21-27
• /
• 2014

Objective : Infectious spinal disease is regarded as an infection by a specific organism that affects the vertebral body, intervertebral disc and adjacent perivertebral soft tissue. Its incidence seems to be increasing as a result of larger proportion of the older patients with chronic debilitating disease, the rise of intravenous drug abuser, and the increase in spinal procedure and surgery. In Korea, studies assessing infectious spinal disease are rare and have not been addressed in recent times. The objectives of this study are to describe the epidemiology of all kind of spinal infectious disease and their clinical and microbiological characteristics as well as to assess the diagnostic methodology and the parameters related to the outcomes. Methods : A retrospective study was performed in all infectious spinal disease cases presenting from January 2005 to April 2010 to three tertiary teaching hospitals within a city of 1.5 million in Korea. Patient demographics, risk factors, clinical features, and outcomes were assessed. Risk factors entailed the presence of diabetes, chronic renal failure, liver cirrhosis, immunosuppressants, remote infection, underlying malignancy and previous spinal surgery or procedure. We comparatively analyzed the results between the groups of pyogenic and tuberculous spinal infection. SPSS version 14 statistical software was used to perform the analyses of the data. The threshold for statistical significance was established at p<0.05. Results : Ninety-two cases fulfilled the inclusion criteria and were reviewed. Overall, patients of tuberculous spinal infection (TSI) and pyogenic spinal infection (PSI) entailed 20 (21.7%) and 72 (78.3%) cases, respectively. A previous spinal surgery or procedure was the most commonly noted risk factor (39.1%), followed by diabetes (15.2%). The occurrence of both pyogenic and tuberculous spondylitis was predominant in the lumbar spine. Discs are more easily invaded in PSI. At initial presentation, white cell blood count and C-reactive protein levels were higher in PSI compared to TSI (p<0.05). Etiological agents were identified in 53.3%, and the most effective method for identification of etiological agents was tissue culture (50.0%). Staphyococcus aureus was the most commonly isolated infective agent associated with pyogenic spondylitis, followed by E. coli. Surgical treatment was performed in 31.5% of pyogenic spondylitis and in 35.0% of tuberculous spondylitis cases. Conclusion : Many previous studies in Korea usually reported that tuberculous spondylitis is the predominant infection. However, in our study, the number of pyogenic infection was 3 times greater than that of tuberculous spinal disease. Etiological agents were identified in a half of all infectious spinal disease. For better outcomes, we should try to identify the causative microorganism before antibiotic therapy and make every effort to improve the result of culture and biopsy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.712-718
• /
• 2000

The alkali extraction of anticoagulant from a clove revealed 3-to 6-fold more effective than hot-water extraction. The highest anticoagulant activity was found with 0.1 N NaOH at 7$0^{\circ}C$. The anticoagulant fractions from a clove, EC-2B and EC-2C were separated by alkali extraction, ethanol precipitation, cetavlon treatment, and ultrafiltration. The anticoagulant activities of these two fractions were, respectively, 6.57 and 8.63 times higher than those extracted with hot-water. As of the sensory evaluation, boiled pork added with EC-2B fraction revealed similar sensory acceptability to raw clove material, while EC-2C fraction had low sensory acceptability due to a mild chemical odor. Antibacterial characteristics against pathogenic microorganism of both fractions were confirmed in the control strain. The inhibitory effect of growth by EC-2B was noticed above 0.016% in S. aureus. Also, EC-2C showed the inhibitory effect at 0.004% in both E. cole and S. aureus control strains.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2001.06a
• /
• pp.149-153
• /
• 2001

To investigate the mode of bactericidal action for antimicrobial peptide, pediocin, synthetic and mutant pediocins were prepared by direct chemical synthesis. Native pediocin was purified from Pedio-coccus acidilactici M and its conformational structure and bactericidal functions were analyzed and compared to synthetic pediocin. Schematic mode of pediocin actions, how pediocin binds on the target cell membrane, penetrates and makes tunnel are proposed. For these purposes, primary and secondary structures of pediocin was analyzed and disulfide bond assignment was also done. The pediocin purified from P. acidilactici M had high effective bactericidal ability against gram positive bacteria, especially Listeria monocytogenes and was very stable at extreme pHs and even at high temperatures such as autoclaving temperature (121$^{\circ}C$). Pediocin was consisted of 44 amino acids with four cysteines. Novel synthetic peptides were achieved by solid phase peptide synthesis(SPPS) method. To explain the function of cysteine in C-terminal region, mutant pediocin, Ped[C24A＋C44A], was synthesized and their structural and biological functions were analyzed. Second mutant pediocin, Ped[KllE], was prepared to explain the function of lysine at 11 of N-terminal part of pediocin, especially loop of $\beta$-sheet, and to predict the initial binding site of pediocin. The native and synthetic pediocins was showed random coil conformation by spectropolarimetry in moderate conditions. This conformation was observed in extreme conditions such as high temperature and low and high pHs, also. Circular dichroism(CD) data also showed the existence of $\beta$-turn structure in N-terminal part both native and synthetic pediocins. A structural model for pediocin predicts that 18 amino acids in the N-terminal part of the peptide assume a three-strand $\beta$-sheet conformation. This random coil in C-terminal part of pediocin was converted to folding structure, helix structure, in nonpolar solvents such as alcohol and TFE. The disulfide bond between $^{9}$ Cys and $^{14}$ Cys was concrete and inevitable, however, evidences of disulfide bond between $^{24}$ Cys and $^{44}$ Cys was not. Data of Ped[C24A＋C44A], pediocin mutant showed that $^{44}$ Cys was required during killing the target cells but not inevitable, since Ped[C24A＋C44A] still have bactericidal activity but much less than native pediocin. Another pediocin mutant, Ped[KllE], had still bactericidal activity, was controversial to propose that positive charge like as $^{11}$ Lys in loop or hinge in bacteriocin bound or helped to binding to microorganism with electrostatic interaction between cell membrane especially teichoic acid and positive amino acid nonspecifically. The conformation of pediocin among native, synthetic and mutant pediocins did not show big difference. The conformations between oxidized and reduced pediocin were almost similar regardless of native or synthetic.

• Microbiology and Biotechnology Letters
• /
• v.34 no.3
• /
• pp.185-195
• /
• 2006

Phytoremediation is an economical and environmentally friendly bioremediation technique using plants which can increase the microbial population in soil. Unlike other pollutants such as heavy metals, poly-chlorinated biphenyl, trichloroethylene, perchloroethylene and so on, petroleum hydrocarbons are relatively easily degradable by soil microbes. For successful phytoremediation of soil contaminated with petroleum hydrocarbons, it is important to select plants with high removal efficiency through microbial degradation. In this study, we clarified the roles of plants and rhizobacteria and identified their species effective on phytore-mediation by reviewing the papers previously reported. Plants and rhizobacteria can degrade and remove the petroleum hydrocarbons directly and indirectly by stimulating each other's degradation activity. The preferred plant species are alfalfa, ryegrass, tall fescue, poplar, corn, etc. The microorganisms with a potential to degrade hydrocarbons mostly belong to Pseudomonas spp., Bacillus spp., and Alcaligenes spp. It has been reported that the elimination efficiency of hydrocarbons by soil microorganisms can be improved when plants were simultaneously applied. For more efficient restoration, it's necessary to understand the plant-rhizobacteria interaction and to select the suitable plant and microorganism species.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.350-355
• /
• 2013

The quality of fermented dropwort extract (FDE) and fermented dropwort vinegar (FDV) was assessed for free sugar, organic acid and free and total amino acid content. Major organic acids were lactic acid in FDE and acetic acid in FDV. Free sugars in FDE were fructose and glucose, and those in FDV were fructose, sucrose, and maltose. Aspartic acid was the major free amino acid in both FDE and FDV. Additionally, the main free amino acids in FDE were alanine and ${\gamma}$-amino-n-butyric acid (GABA), while those in FDV were arginine and valine. Moreover, to investigate the protective effects of FDE and FDV against oxidative stress induced by t-BHP and $H_2O_2$, C6 cells were treated with FDE or FDV prior to inducing the oxidative damage. FDE and FDV inhibited cell death significantly in a dose-dependent manner. These data imply that FDE and FDV may be effective in neuronal cell protection against oxidative damage.

• Journal of Life Science
• /
• v.21 no.6
• /
• pp.775-782
• /
• 2011

In this study, the antioxidant activity of methanol extracts and fractions from papaya seed were investigated in vitro. Total polyphenol contents of methanol extracts and fractions from papaya seed varied from 17.74 to 125.99 ${\mu}g/mg$ and total flavonoid contents varied from 1.60 to 32.69 ${\mu}g/mg$. Contents of polyphenol and flavonoid in ethyl acetate (EtOAc) fraction was found to be extremely high (compared with the other fractions examined). Radical-scavenging activities of methanol extracts and fractions were examined using ${\alpha}$,${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl (DPPH) radicals, 2,2'-azino-bis (3-ethyl-benzthiazoline-6-sulfonic acid) (ABTS) and hydrogen peroxide assay. As a result, ethyl acetate fraction of papaya seed showed the highest radical-scavenging activity in various antioxidant systems. The EtOAc fraction from papaya seed induced QR activity in concentrations of 12.5 to 50 ${\mu}g/ml$ with a maximum of a 3.3-fold induction at 50 ${\mu}g/ml$ of fraction. Therefore, the most effective QR inducer among these fractions can be said to reside in the EtOAc fraction, indicating that strong constituents responsible for QR induction potency in the papaya seed extract are largely contained in the EtOAc fraction.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1237-1243
• /
• 2003

As a newly emerging pasteurization method for improving the shelf-life of powdered ginseng, the corona discharge generated at high voltage conditions was examined for its effects on microbial pasteurization, physicochemical characterization, and sensory evaluation. The pasteurizing effects of corona discharge on total bacteria, yeast, molds, and coliforms increased with increasing voltage. However, corona discharge treatment of 5 kv/cm did not show significant effects of pasteurization on the yeast, molds, and coliforms. Treatment with 20 kv/cm reduced about 95% of the total bacteria $(6.14{\pm}0.04{\rightarrow}\;4.59{\pm}0.04$) and coliforms ($2.43{\pm}0.05{\rightarrow}\;1.00{\pm}0.05$) and 99% of the yeast and molds ($4.65{\pm}0.06{\rightarrow}\;2.73{\pm}0.06$). The proximate analysis, minerals, free sugars, crude saponin, and colors of the control ginseng and the ginseng treated with 20 kv/cm were not significantly different at p<0.05. Corona discharge of up to 20 kv/cm did not affect the proximate analysis, minerals, free sugars, crude saponin, and colors of the powdered ginseng. Sensory evaluation scores on color, flavor, taste and overall acceptability between the control ginseng and ginseng treated with 20 kv/cm corona discharge were not significantly different at p<0.05 level. Consequently, corona discharge treatment is thought to be a good alternative pasteurization method for improving the shelf-life of powdered ginseng due to its effective pasteurization, maintenance of nutrients and good sensory characteristics.