• 한국진공학회지
• /
• 제16권5호
• /
• pp.343-347
• /
• 2007

Glass disk상에 대향 타겟식 스퍼터링(Facing Target Sputtering) 방식을 이용하여 $0.1\;{\AA}/s$의 낮은 증착속도로 증착시킬 경우 b.c.c. (100)면 우선배향성을 확인하였으며, 그 위에 Pt박막을 증착시킨 경우 hetero-epitaxial 성장에 의해 Pt박막이(111)의 조밀면이 아닌 (100)면이 우선배향 되었다. 이렇게 형성된 Fe (100)/Pt (100) 이층막(두께 각 3 nm)을 $600\;^{\circ}C$ 수소분위기에서 열처리함에 의해 막전체에 걸쳐서 f.c.t. (00n)면을 형성시키는 데 성공하고, 또한 Fe (100)면 상에 Pt 박막을 증착시키는 동안 열처리를 하고 증착 이후 수소분위기에서 열처리함에 의해 열처리 시간 및 온도를 크게 낮출 수 있음을 확인하였다.

• 대한수의학회지
• /
• 제54권3호
• /
• pp.159-164
• /
• 2014

Bacterial infection of the uterus in Hanwoo can kill embryos. Therefore, many antibiotics have been used to treat this infection in the uterus of repeat breeders. Incorrect use of antibiotics has led to resistance in bacteria. Natural compounds have used as substitutes for antibiotics because they are safe and have very mild side effects. This study was conducted to examine the antimicrobial effects of five extracts from medicinal plants including Humulus japonicas (Hj), Phelledendron amurense (Pa), Viola mandshurica (Vm), Carthamus tinctorius (Ct), and Chelidoni herba (Ch) on bacteria isolated from the uterus of Hanwoo using the paper disc diffusion method. Hj and Pa extracts had potent antimicrobial effects against Staphylococcus lentus, Streptococcus infantarius subsp. coli, and Bacillus pumilus. Pa had the greatest antimicrobial effect among the five medicinal plants and was effective against 19 types of bacteria from bovine uterus. Compared to Pa, Hj showed weaker antimicrobial effects on all the bacteria tested except Pseudomonas aeruginosa. Vm, Ct, and Ch also showed weak antimicrobial effects on the tested bacteria. The results obtained suggest that Hj and Pa are natural compounds suitable for treating bacterial infection in repeat breeders and improving conception rates of Hanwoo.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.207-207
• /
• 2012

Si quantum dot (QD) imbedded in a $SiO_2$ matrix is a promising material for the next generation optoelectronic devices, such as solar cells and light emission diodes (LEDs). However, low conductivity of the Si quantum dot layer is a great hindrance for the performance of the Si QD-based optoelectronic devices. The effective doping of the Si QDs by semiconducting elements is one of the most important factors for the improvement of conductivity. High dielectric constant of the matrix material $SiO_2$ is an additional source of the low conductivity. Active doping of B was observed in nanometer silicon layers confined in $SiO_2$ layers by secondary ion mass spectrometry (SIMS) depth profiling analysis and confirmed by Hall effect measurements. The uniformly distributed boron atoms in the B-doped silicon layers of $[SiO_2(8nm)/B-doped\;Si(10nm)]_5$ films turned out to be segregated into the $Si/SiO_2$ interfaces and the Si bulk, forming a distinct bimodal distribution by annealing at high temperature. B atoms in the Si layers were found to preferentially substitute inactive three-fold Si atoms in the grain boundaries and then substitute the four-fold Si atoms to achieve electrically active doping. As a result, active doping of B is initiated at high doping concentrations above $1.1{\times}10^{20}atoms/cm^3$ and high active doping of $3{\times}10^{20}atoms/cm^3$ could be achieved. The active doping in ultra-thin Si layers were implemented to silicon quantum dots (QDs) to realize a Si QD solar cell. A high energy conversion efficiency of 13.4% was realized from a p-type Si QD solar cell with B concentration of $4{\times}1^{20}atoms/cm^3$. We will present the diffusion behaviors of the various dopants in silicon nanostructures and the performance of the Si quantum dot solar cell with the optimized structures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.590-590
• /
• 2012

A transparent conducting oxide (TCO) layer was applied in crystalline Si (c-Si) solar cells without use of the conventional SiNx-coating. A high quality indium-tin-oxide (ITO) layer was directly deposited on an emitter layer of a Si wafer. Three different types of emitters were formed by controlling the phosphorous diffusion condition. A light-doped emitter forming a thinner emitter junction showed an improved photoconversion efficiency of 14.1% comparing to 13.2% of a heavy-doped emitter. This was induced by lower recombination within a narrower depletion region of the light-doped emitter. In the aspect of light management, the intermediate refractive index of ITO is effective to reduce the light reflection leading the enhanced carrier generation in a Si absorber. For the electrical aspect, the ITO layer serves as an efficient electrical conductor and thus relieves the burden of high contact resistance of the light-doped emitter. Additionally, the ITO works as a buffer layer of Ag and Si and certainly prevents the shunting problem of Ag penetration into Si emitter region. It discusses an efficient design scheme of TCO-embedded emitter Si solar cells.

• Journal of Pharmaceutical Investigation
• /
• 제36권4호
• /
• pp.253-262
• /
• 2006

This study was performed to investigate the effects of treatment for dermatitis using the herbal gel preparations. Scutellariae Radix(SR) and Zingiberis Rhizoma(ZR) were used for the purpose of herbal preparations. Baicalin, baicalein are the ingredients of SR, having biological effects like anti-inflammatory, anti-oxidative, anti-bacterial and antiallergic action. 6-Gingerol is one of the ingredients of ZR having biologicai effects like anti-inflammatory and analgesic action. The three types of hydrogels(SRE, SRH, SZH) were formulated with Carbopol 940, Labrasol, Triethanolamine etc. Baicalin was hydrolysed to baicalein by $\beta$-glucuronidase for the purpose to increase rate of skin permeation. Content of ingredients by HPLC determination, rate of skin permeation using Franz type diffusion cell, anti-oxidative activity for the free radical, hydroxyl radical, superoxide, anti-inflammatory by using carrageenan injection, efficacy on the dermatitis induced by 2,4-dinitro-chlorobenzene(DNCB) were experimented. Baicalein showed higher permeability than baicalin, so it is considered that baicalein was more suitable form than baicalin for transdermal absorption by its lipophilic property. In the anti-oxidative experiments, SZH gel was the most effective scavenging activity than the other gels in all experiments. In anti-inflammatory test, SRM and SZH gel more decreased edma rapidly than SRE gel. In case of using SZH gel, treatment period for the dermatitis was more declined than that of other gel groups. These results suggests that the SZH hydrogel could be suitable preparations for the treatment of dermatitis.

• Journal of Pharmaceutical Investigation
• /
• 제40권2호
• /
• pp.91-100
• /
• 2010

The objective of this work is to study transdermal delivery of donepezil hydrochloride (DH) using iontophoresis and to evaluate various factors which affect the transdermal transport. After the flux study using 4 kinds of hydrogel, hydrogel containing 8% poly(ethylene oxide) (PEO) was chosen as the hydrogel for further studies. Under experimental condition, DH was stable. We have studied the effect of polarity, current density, drug concentration and current profile on transdermal flux and compared the results. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell and full thickness hairless mouse skin. DH is positively charged at pH 7.4, and anodal delivery was much larger than cathodal and passive delivery at all current densities studied (0.2, 0.4 and 0.6 mA/$cm^2$). Cathodal delivery showed higher flux than passive flux. Flux increased as the concentration of DH in hydrogel increased. Pulsatile application of current showed smaller flux value than the application of continuous current. Based on these results, we have evaluated the possibility of delivering enough amount of DH to reach the therapeutic level. The maximum cumulative amount of DH transported for 12 hours was 455 ${\mu}g/cm^2{\cdot}hr$ when the amount of DH in the hydrogel was 3 mg/mL and the current density was 0.4 mA/$cm^2$. If the patch size is 10 $cm^2$, then we can deliver 4.6 mg for 12 hours. Because the daily dosage of DH is 5 mg, it seems possible to deliver clinically effective amount of DH using iontophoresis. This study also provides some information about the role of electrorepulsion and electroosmosis during the transport through skin.

• Journal of Pharmaceutical Investigation
• /
• 제40권2호
• /
• pp.79-84
• /
• 2010

Osteoporosis was traditionally defined by the occurrence of nontraumatic fractures, especially of the spine, in the setting of low bone mass. Bisphosphonates are an important group of therapeutic agents for the management of osteoporosis, as they inhibit bone resorption and increase bone density, thereby potentially decreasing fracture risk. Risedronate sodium is a bisphosphonate class used by oral formulation. In this study, risedronate was transdermally delivered by iontophoresis. Effects of polarity, pH, current density, and drug concentration were studied using a side-by-side diffusion cell including the hairless mice skin. In addition we studied effect of enhancers. The flux was evaluated by HPLC/UV system. The amount of transported drug under iontophoretic delivery was approximately 186 fold higher than that under passive delivery. Flux was proportional to the increase of drug concentration and current density. The flux was observed about 0.68mg/$cm^2$ when the amout of Propyleneglycol monolaurate (PGML) used 1% as enhancer. Results indicated that iontophoresis is an effective method for transdermal administration of risedronate sodium

• 한국표면공학회지
• /
• 제45권6호
• /
• pp.248-256
• /
• 2012

A Pd-based hydrogen membranes for hydrogen purification and separation need high hydrogen perm-selectivity. The surface roughness of the support is important to coat the pinholes free and thin-film membrane over it. Also, The pinholes drastically decreased the hydrogen perm-selectivity of the Pd-based composite membrane. In order to remove the pinholes, we introduced various surface pre-treatment such as alumina powder packing, nickel electro-plating and micro-polishing pre-treatment. Especially, the micro-polishing pretreatment was very effective in roughness leveling off the surface of the porous nickel support, and it almost completely plugged the pores. Fine Ni particles filled surface pinholes with could form open structure at the interface of Pd alloy coating and Ni support by their diffusion to the membrane and resintering. In this study, a $4{\mu}m$ surface pore-free Pd-Cu-Ni ternary alloy membrane on a porous nickel substrate was successfully prepared by micro-polishing, high temperature sputtering and Cu-reflow process. And $H_2$ permeation and $N_2$ leak tests showed that the Pd-Cu-Ni ternary alloy hydrogen membrane achieved both high permeability of $13.2ml{\cdot}cm^{-2}{\cdot}min^{-1}{\cdot}atm^{-1}$ permation flux and infinite selectivity.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.129-129
• /
• 2018

Hard coating application is effective way of cutting tool for hard-to-machine materials such as Inconel, Ti and composite materials focused on high-tech industries which are widely employed in aerospace, automobile and the medical device industry also Information Technology. In cutting tool for hard-to-machine materials, high hardness is one of necessary condition along with high temperature stability and wear resistance. In recent years, high-entropy alloys (HEAs) which consist of five or more principal elements having an equi-atomic percentage were reported by Yeh. The main features of novel HEAs reveal thermodynamically stable, high strength, corrosion resistance and wear resistance by four characteristic features called high entropy, sluggish diffusion, several-lattice distortion and cocktail effect. It can be possible to significantly extend the field of application such as cutting tool for difficult-to-machine materials in extreme conditions. Base on this understanding, surface coatings using HEAs more recently have been developed with considerable interest due to their useful properties such as high hardness and phase transformation stability of high temperature. In present study, the nanocomposite coating layers with high hardness on WC substrate are investigated using high entropy alloy target made a powder metallurgy. Among the many surface coating methods, reactive magnetron sputtering is considered to be a proper process because of homogeneity of microstructure, improvement of productivity and simplicity of independent control for several critical deposition parameters. The N2 is applied to reactive gas to make nitride system with transition metals which is much harder than only alloy systems. The acceleration voltage from 100W to 300W is controlled by direct current power with various deposition times. The coating layers are systemically investigated by structural identification (XRD), evaluation of microstructure (FE-SEM, TEM) and mechanical properties (Nano-indenter).

• 열처리공학회지
• /
• 제23권3호
• /
• pp.150-155
• /
• 2010

Generally, plasma nitriding process has composed with a nitriding layer within glow discharge region occurred by energy exchange. The dissociations of nitrogen molecules are very difficult to make neutral atoms or ionic nitrogen species via glow discharge area. However, the captured electrons in which a double-folded screen with same potential cathode can stimulate and come out some single atoms or activated ionic species. It was showed an important thing that is called "hat is a dominant component in this nitriding process?" in plasma nitriding process and it can take an effective species for without compound layer. During a plasma nitriding process, it was able to estimate with analyzing and identification by optical emission spectroscopy (OES) study. And then we can make comparative studies on the nitrogen transfer with plasma nitriding and ATONA process using plasma diagnosis and metallurgical observation. From these observations, we can understand role of active species of nitrogen, like N, $N^+$, ${N_2}^+$, ${N_2}^*$ and $NH_x$-radical, in bulk plasma of each process. And the same time, during DC plasma nitriding and other processes, the species of FeN atom or any ionic nitride species were not detected by OES analyzing.