• Carbon letters
• /
• v.27
• /
• pp.1-11
• /
• 2018

A simple, but effective means of tailoring the physical and chemical properties of carbon materials should be secured. In this sense, chemical doping by incorporating boron or nitrogen into carbon materials has been examined as a powerful tool which provides distinctive advantages over exohedral doping. In this paper, we review recent results pertaining methods by which to introduce boron atoms into the $sp^2$ carbon lattice by means of high-temperature thermal diffusion, the properties induced by boron doping, and promising applications of this type of doping. We envisage that intrinsic boron doping will accelerate both scientific and industrial developments in the area of carbon science and technology in the future.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.1
• /
• pp.43-50
• /
• 1998

Niosomes are vesicles formed from synthetic non-ionic surfactants, offering an alternative to chemically unstable and expensive liposomes as a drug carrier. Non-ionic surfactant and cholesterol mixture film leads to the formation of vesicular system by hydration with sonication method. The formation of niosome was ascertained by negative staining of TEM. The entrapment efficiency of niosomal suspension was gradually increased with increasing the ratio of cholesterol to surfactant. It was found that the niosome with 6 : 4 (polyoxyethylene 2-cetyl ether: cholesterol) ratio was more stable than those with other ratios. The topical application of acyclovir(ACV) in the treatment of herpes simplex virus type 1(HSV-1) skin disease has a long history. There are an increasing number of reports, however, in which topical ACV therapy is not as effective as oral administration. Lack of efficacy with topical ACV has been hypothesized to reflect the inadequate delivery of drug to the skin. We investigated the permeation of niosome containing $[^{3}H]ACV$ in hairless mouse skin using Franz diffusion cell model. Permeation coefficient(P) of aqueous ACV was $6.7{\times}10^{-4}\;(cm/hr)$ and that of ACV in niosome was $23.4{\times}10^{-4}\;(cm/hr)$, suggesting about 3.5 times increase in the transdermal permeation.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.2
• /
• pp.125-130
• /
• 2004

Paclitaxel is an effective antineoplastic drug for various cancers especially ovarian and breast cancer. This study is to find the optimum condition for the preparation of nanoemulsions and to improve the stability and loading amount of paclitaxel in nanoemulsions. Nanoemulsions were prepared by modified spontaneous emulsification solvent diffusion method. It was composed of phosphatidylcholine:cholesterol:1,2-Distearoyl-sn-Glycero-3-Phosphoethanolamine-N-[Metoxy (Polyethylene glycol)-2000]:paclitaxel at a weight ratio of 5:3:1:1 and the Tween 80 as a surfactant. The particle size and the shape of nanoemulsions were measured by particle analyzer and SEM, respectively. The loading amount of paclitaxel in nanoemulsion was measured by UV-visible spectroscopy at 227 nm. The particle sizes were $80{\sim}120\;nm$ and the loading efficiency of paclitaxel was $8{\sim}39%$. The optimum conditions for the preparation of nanoemulsions were 8% w/w phospholipid, 16% w/v Tween 80 and 2% w/w paclitaxel, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.6
• /
• pp.1011-1017
• /
• 2016

The antimicrobial effects of methanol and ethanol extracts of Inula britannica against several Helicobacter pylori strains (26695, J99, and SS1) were evaluated in vitro, to determine their applicability as functional foods. In the paper disc diffusion method, the antimicrobial effects of the I. britannica extracts against the H. pylori strains were apparent. Viable cell counting also showed that the extracts at 100 μg/ml concentration dramatically decreased the viability of the H. pylori strains. In particular, the methanol and ethanol extracts at a concentration of 100 μg/ml reduced the H. pylori SS1 cell number to 2.46 log CFU/ml and 1.08 log CFU/ml, respectively. In the presence of 100 μg/ml extracts, the urease production of H. pylori SS1 was decreased to more than 30%, whereas that of H. pylori J99 and H. pylori 26695 was decreased to about 20%, relative to the controls. The extracts inhibited the attachment of the H. pylori strains to human gastric AGS cells as well as caused the detachment of already attached H. pylori cells. In addition, the H. pylori morphology was changed to a coccoidal shape in the presence of the extracts. In conclusion, the I. britannica extracts were effective against H. pylori strains in vitro, irrespective of genotype status, and could therefore be used as novel functional foods.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.481-493
• /
• 2006

The purpose of the review article was to summarize and discuss the available information concerning the effect of bleaching on human teeth and reduced treatment on negative influence. Tooth bleaching effect was differ from extent of concentration and application period of a tooth bleaching agent, certainly full knowledge prior treatment about adverse effect possible appearance and follow clinical treatment for the least reduce. It remains unclear in how far those observation may result in significant adverse effect under clinical conditions. Nevertheless, further investigation are necessary to elucidate these aspect more precisely. The findings of the study were as follows : 1. It is recommended to delay placement of restorations after termination of bleaching therapy for at least 1-3 weeks. 2. Reduced negative influence that is clinical feasibility of catalase in protecting bleached surface against Oxygen radical. 3. The residual peroxide in tooth after bleaching seems to be removed by gradual diffusion and it may be possible to eliminate the adverse effect on tooth by using water displacement solution, ethylalcohol and aceton including it for effective removal of free radical oxygen.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.68-69
• /
• 2007

To make cost-effective solar cells, We have to use low cost material or make short process time or high temperature process. In solar cells, formation of emitter is basic and important technique according to build-up P-N junction. Diffusion process using spin-on dopants has all of this advantage. In this paper, We investigated n+ emitter formation spin-on dopants to apply crystalline silicon solar cells. We known variation of sheet resistance according to variation of temperature and single-crystalline and multi-crystalline silicon wafer using Honeywell P-8545 phosphorus spin-on dopants. We obtain uniformity of sheet resistance within 3~5% changing RPM of spin coater.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.127-127
• /
• 2010

Owing to many advantages on indirect intersubband absorption from the hole miniband to the electron miniband based on the type-II band alignment in InAs/GaSb strained-layer superlattice (SLS), InAs/GaSb SLS infrared photodetector (SLIP) has emerged as a promising system to realize high-detectivity quantum photodetector operating up to room temperature in the spectral range of mid-infrared (MIR) to far-infrared (FIR). In particular, n-barrier-n (n-B-n) structure designed for blocking the majority-carrier dark current makes it possible for MIR/FIR dual-band SLIP whose photoresponse (PR) band can be exclusively selected by the bias polarity. In this study, we present the MIR and FIR photoresponse (PR) mechanism identified by dual-band PR spectra and photoluminescence (PL) profiles taken from InAs/GaSb SLIP. In the MIR/FIR PR spectra measured by changing bias polarity, each spectrum individually shows a series of distinctive peaks related to the transitions from the hole subbands to the conduction one. The PR mechanism at each polarity is discussed in terms of diffusion current, and a superposition of MIR-PR in the FIR-PR spectrum is explained by tunnelling of electrons activated in MIR-SLS. The effective FIR-PR spectrum decomposed into three curves for HH1, LH1, and HH2 has revealed the edge energies of 120, 170, and 220 meV, respectively, and the temperature variation of the MIR-PR edge energies shows that the temperature behavior of the SLS systems can be approximately expressed by the Varshni empirical equation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.199-201
• /
• 2006

A lot of researches and experiments have been performed to make more efficient dye-sensitized solar cell. Among them, insertion of a grid electrode in DSC is one method to increase overall performance as being shortened distance of electrons' movement by diffusion. In this paper, we measured overall characteristics which is included voltage-current characteristic curve, efficiency, fill factor by comparison between DSC without and with grid electrode. As a result, we got maximum 1.8 times increase of efficiency and approximately 1.7 times rise of fill factor. And we experimented 8, 10, 12, 14mm of grid gap and compared their results to optimize grid gap which is able to incite the most effective movement of electrons. Consequently, we got the result that electrons' movement is the most effect ive when grid gap is approximately 12mm.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.3
• /
• pp.139-145
• /
• 2004

Equal channel angular pressing (ECAP) technique had been adapted to the Mg alloy (AZ31) for achieving effective grain refinement through severe deformation. The average grain size of $2.5{\mu}m$ could be obtained after 4 passes. The stability of the ECAPed structure at elevated temperatures was examined by annealing the ECAPed materials over a wide range of temperature between 473 and 748 K. The average activation energy, Q, for static grain growth of 1, 2 and 3 passes was 33.7 kJ/mole (=0.25QL, activation for lattice diffusion). The abnormally low Q value in the lower temperature range may indicate that grain growth occurs in the unrecrystallized microstructure where non-equilibrium grain boundaries containing a large number of extrinsic dislocations exist. The yield stresses of the ECAPed alloys decreased whereas the elongations increased after the ECAP process. These results should be related to the modification of texture for easier slip on basal plane.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.464-471
• /
• 1997

Convective smoke spread in a corridor is experimentally investigated using thermocouples and visualization technique with a laser beam sheet. The speed of smoke front under a ceiling is measured by a series of thermocouples. Visualization of the ceiling jet formation and of smoke filling process is carried out to observe the lowering of a smoke layer. From the results, a large-scale convective motion plays dominant roles for smoke spread in the vicinity of the end of the corridor from visualized photos along with temperature records. The large-scale convective motion of the smoke is generated from the impingement of the ceiling jet front on the end of the corridor, and thus turning the flows toward the floor. Such a circulating motion of fluid transports some smoke to some region where its momentum is effective. It is therefore shown that the conventional concept of lowering smoke in the two-layer zone model has some restrictions for the corridor because the lowering of smoke layer has been thought to be mass transport due to relatively small scale motions such as the decrease of buoyancy, mass diffusion and momentum exchanges.